Buffalo MiniStation Manuel utilisateur

MiniStation

HD-PZNU3

User Manual

www.buffaloamericas.com

35020740-02

2015.11

Contents

Diagrams .........................................................................2

Specifications..................................................................3

Software Installation......................................................3

Recommended Usage ....................................................4

Dismounting the Unit.....................................................5

For Windows .....................................................................................5

For Mac..............................................................................................5

Troubleshooting .............................................................6

I can see the MiniStation in Computer (PC) but I cannot access it

(Windows).........................................................................................6

I cannot see the MiniStation ...........................................................6

My backup program cannot save files to the MiniStation............6

Regulatory Compliance Information ............................7

Company Information .....................................................................7

FCC Statement..................................................................................7

IC statement (IC déclaration)...........................................................8

Diagrams

1 Power/Access LED

Idle: White

Active: Blinking white

When HD-PZNU3 is in encrypted mode

Locked: Orange

2 USB Cable

3 USB Connector

4 Anti-Theft Security Slot

Note: To make the drive water resistant, connect the USB cable to the drive properly and close the anti-theft

security slot with the cover.

Specifications

Check Buffalo's website for information on the latest products and compatible models.

Interface USB 3.0

Connector USB 3.0 Micro-B

Transfer speed 5 Gbps maximum (USB 3.0)

External dimensions 90 x 141 x 21 mm; 3.54" x 5.55" x 0.83" (excluding protruding parts)

Power 5 V ± 5%

Compatible OS

Windows 10 (64-bit or 32-bit)

Windows 8.1 (64-bit or 32-bit)

Windows RT 8.1 *

Windows 8 (64-bit or 32-bit)

Windows RT *

Windows 7 (64-bit or 32-bit)

Windows Vista (64-bit or 32-bit)

OS X 10.8 or later **

* Only basic external hard drive functionality is supported with these operating systems; utilities from our website

may not work.

These operating systems cannot be used with the drive while it is in encrypted mode. Switch the drive to normal

mode for these operating systems.

** Utilities from our website other than ModeChanger may not work with these operating systems.

Software Installation

Optional software for the HD-PZFU3, along with the software manuals, are available from the download page below.

http://d.buffalo.jp/hd-pznu3/

Recommended Usage

To avoid damage to data, never do any of the following while data is being accessed:

- unplug the cables

- turn off your computer

- put your computer into standby, hibernate, or sleep mode

Never configure this unit as a destination for virtual memory.

The maximum size of a file on a FAT32 drive is 4 GB. To work with larger files, reformat the drive with NTFS or

Mac OS Extended.

Some computers may not recognize this device at boot. If this happens, unplug the cable, then plug it in again

after a few seconds.

This unit supports hot-plugging.

You can plug or unplug the USB cable while the unit and your PC are on. However, never unplug the cable while

data is being accessed. If you unplug the unit while data is being accessed, your data may be damaged or lost.

Never put anything on top of the MiniStation. It may cause the unit to malfunction.

If the unit is connected to a USB 2.0 or 1.1 plug, Windows will display a message that a high-speed USB device

is connected to a non high-speed USB hub. Move the unit to a USB 3.0 port for best performance, or click [X] to

continue.

You may hear some noise while the unit is working, especially while it's booting or being accessed. This is

normal.

Do not boot your operating system from this unit.

The first time you connect this unit, it may take about 20 seconds before the power/access LED turns on.

If you use this unit with multiple partitions, format each partition before use.

If your Windows computer will not boot while this unit is connected, then connect the unit to your computer

after rebooting Windows. Also, refer to your computer's manual to change the BIOS setting to boot from an

internal hard drive if you want to turn your computer on or off while this unit is connected.

Some computers may display a delayed write when they return from an energy-saving state. If this happens,

unplug the unit before putting your computer into the energy-saving mode.

This drive may become hot during use.

This unit is designed to release heat through its case. The surface of the case may become quite hot in normal use.

Even when the unit is off, the case may still be warm from standby current.

If the power/access LED does not turn off when you turn off your computer, unplug the USB cable from the

drive.

Some computers do not support power saving mode.

Before using this unit with a Mac, reformat it with Mac OS Extended using the disk utility in Mac OS.

Dismounting the Unit

If your computer is turned on, please follow the procedure below to unplug the unit. If your computer is turned off,

then it is always safe to unplug the unit. Unplugging the unit incorrectly can corrupt data. Please be careful.

For Windows

1 Click the icon , or in the system tray.

2 When the menu opens, click the device name.

3 A message that indicates you can safely remove the unit will appear.

For Mac

1 Drag this unit's icon to the trash to dismount the drive. Or, click the dismount icon from the sidebar of the

Finder to dismount the drive.

2 It's now safe to unplug the unit from your Mac.

Troubleshooting

I can see the MiniStation in Computer (PC) but I cannot

access it (Windows)

The drive may require formatting. Try using DiskFormatter2. Diskformatter2 and its manual are available from

http://d.buffalo.jp/hd-pznu3/.

I cannot see the MiniStation

Verify that the power LED is on. If it is not, check the cable. The MiniStation should be connected to your computer

by a USB cable. Check that both ends are correctly plugged in.

Verify that the hard drive inside the MiniStation is spinning. This can be verified by placing your hand on the side of

the case and feeling for a slight vibration.

Also, after the MiniStation has been powered on for 15 minutes or longer it will begin to get warm. If neither of the

proceeding tests verified that the hard drive is spinning, then please contact technical support for further assistance.

My backup program cannot save files to the MiniStation

Reformat your MiniStation with NTFS or Mac OS Extended. FAT32 is limited to 4 GB size files.

Regulatory Compliance Information

The information below is only for US region and Canada region.

Only use the cables and accessories that are included in the package. Don't use other accessories or cables unless

specifically instructed to in the documentation.

Company Information

Buffalo Americas, Inc.

11100 Metric Boulevard suite 750 Austin Texas 78758

+1-512-349-1500

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Proposition 65

WARNING:

This product and its components contain chemicals known to the State of California to cause cancer and birth

defects, or reproductive harm. Wash hands after handling.

IC statement (IC déclaration)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following

two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the

device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Buffalo Stockage

Buffalo

Buffalo HD-PHS40U2 Manuel utilisateur

Buffalo

Buffalo CloudStor CS-WV/1D Manuel utilisateur

Buffalo

Buffalo TS-XEL Series Manuel d'utilisation et d'entretien

Buffalo

Buffalo TeraStation iSCSI Manuel utilisateur

Buffalo

Buffalo DriveStation HD-HSIU2 Series Manuel utilisateur

Buffalo

Buffalo LS-QVL Manuel utilisateur

Buffalo

Buffalo TeraStation 5200DS Manuel utilisateur

Buffalo

Buffalo MiniStation HD-PEU3 Manuel utilisateur

Buffalo

Buffalo HD-CELU2 DRIVESTATION Manuel utilisateur

Buffalo

Buffalo MiniStation HD-PXU2 Manuel utilisateur

Buffalo

Buffalo HD-LBU2 Manuel utilisateur

Buffalo

Buffalo HD-HGLAN Series Manuel utilisateur

Buffalo

Buffalo HD-HCU2 DriveStation Manuel utilisateur

Buffalo

Buffalo MiniStation DataVault HDS-PH160U2 Manuel utilisateur

Buffalo

Buffalo LinkStation Pro LS-XHL Manuel utilisateur

Buffalo

Buffalo DriveStation HD-CEIU2 Manuel utilisateur

Buffalo

Buffalo LinkStation LS410D Series Manuel utilisateur

Buffalo

Buffalo LinkStation 200 Series Manuel utilisateur

Buffalo

Buffalo MiniStation HD-PEU3 Manuel utilisateur

Buffalo

Buffalo HJ328 Manuel utilisateur

Buffalo

Buffalo HD-HCU2 DriveStation Manuel utilisateur

Buffalo

Buffalo WS-QV4TL/R5 Instructions d'utilisation et de sécurité

Buffalo

Buffalo HD-PZU3 Manuel utilisateur

Buffalo

Buffalo TeraStation Pro Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur