Buffalo ELFSAFE Manuel utilisateur

! ! !

ELFSAFE / ELFSFB MANUAL

__ __ __ __ __ __ __ __

(record your personal 3-8 digit security code) (Electronic Floor Safe Serial Number)

COMPLETE & SUBMIT REGISTRATION CARD TO VERIFY OWNERSHIP

KEEP THIS MANUAL AND SALES RECEIPT FOR FUTURE REFERENCE

If you experience a problem or have questions, visit call Customer Service at 1-636-532-9888,

Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.

#1) Insert Key and rotate left, while rotating knob right. Open door.

#2) Remove battery cover and install (4) AA batteries (1.5V) batteries. Replace battery cover.

(NOTE: Batteries are included.)

#3) Before closing door, be certain your keys are not inside the safe. Now close door.

Factory default code is set to 1 5 9 B. To open using electronic lock, press 1 5 9 B.

(These numbers are preset. You should change the entry code as soon as possible after opening the

safe to insure proper security.)

After you have entered the factory code, you will need to turn the knob clockwise to open the door.

You will have 5 seconds to turn the handle before the locking mechanism is reactivated. When the valid

code entered, the lock will beep once and the green LED turns on. When an invalid code is entered, the

lock will keep beeping and the yellow LED flashes.

ENTERING YOUR SECURITY CODE

CHANGING USER CODE #1

ALWAYS PERFORM THE OPERATION WITH THE DOOR OPEN

1) Press the “reset” button, the lock will beep once and the yellow LED turns on.

(The “reset” button is located on the back cover or the side frame (hinge side).

2) Enter your new digit code (3-8 digits), then press “A” or “B” button.

3) Test the lock operation several times before closing the door.

DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT THE NEW

SECURITY CODE HAS BEEN ENTERED CORRECTLY.

*WRONG TRY PENALTY --- Entry of three (3) consecutive invalid codes starts a

20 second lock out. (It will continue to beep for 20 seconds and the key pad will

not respond to any operation.)

If the code fails, follow steps 1 and 2 again. If the code works successfully, record your combination

number on the front of this form or somewhere in your records, then you should lock the safe. When you

open the safe in the future, enter the security code you have set followed by the “A” or “B” button”.

! ! !

4!Drywall!Screws!

4!Bolts!

202103!

1!!Locking!Bolts!

2!!Reset!Button!

3!!Battery!Compartment!

4!!Lock/Unlock!

5!!Key!

6!!Ready!Indicator!Light!

7!!Low!Battery!Indicator!Light!

8!!Proceed!Indicator!Light!

9!!B-Button!

SPECIFICATIONS

Product Size：19.7"H x 13.8"W x 12.2"D

Internal Dimension: 19.4"H x 13.6"W x 9.8"D

Internal Size = 1.51 Cu Ft

3mm Door (Body 6mm)

This safe is not fire rated

Two one-way locking bolts (No dead bolts)

BATTERY INSTALLATION

This lock requires (4) AA batteries (1.5V). Under normal use, batteries will last about 1 year. When the

battery is low and you press a button on the keypad, a red warning light indicates the battery is low.

To test the battery, enter your security code. If the batteries are low, the red light will come on

momentarily. To replace the battery, remove the cover by pressing the tab and turning the cover as

shown in the illustration. Replace the old battery and screw the cover back in place.

TROUBLE KEY

A “Trouble Key” has been included in the event that you have forgotten or lost your security code. Please

record the number of your key in a safe location in the event the key needs to be replaced in the future.

To open the safe using the Trouble Key, follow the steps below:

1. Remove the key cover.

2. With your right hand, insert the key in the key hole and turn counter clockwise 1/4 turn (until

stopped) to unlock.

3. Keep the door open until you have entered a new security code. Before entering your new

security code remove the key and screw the cover back in place.

4. Enter your new security code. (DO NOT STORE KEY IN SAFE)

REPLACEMENT TROUBLE KEY/OVERRIDE KEY

If you lose your key, verification of ownership is required in order to receive replacement key.

Contact Customer Service at 1-636-532-9888 to verify registration, then complete the Replacement

Form, along with required Service Fees. The Replacement Form must include the Serial Number and

Lock Number and be notarized by a non-family member.

Use the included drywall screws or anchor bolts for final installation.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Buffalo Stockage

Buffalo

Buffalo LinkStation LS-LGL Manuel utilisateur

Buffalo

Buffalo DriveStation Quattro HD-RQS2TSU2/R5 Manuel utilisateur

Buffalo

Buffalo JustStore Portable HD-PVU2 Manuel utilisateur

Buffalo

Buffalo HD-LBU3 Manuel utilisateur

Buffalo

Buffalo DriveStation HD-HC160U2 Manuel utilisateur

Buffalo

Buffalo TeraStation Manuel d'utilisation et d'entretien

Buffalo

Buffalo TS-RHTGL-R5 Manuel utilisateur

Buffalo

Buffalo LinkStation Pro Manuel utilisateur

Buffalo

Buffalo HD-LBU2 Manuel utilisateur

Buffalo

Buffalo TeraStation iSCSI TS-ITGL/R5 Manuel utilisateur

Buffalo

Buffalo MiniStation DataVault HDS-PH160U2 Manuel utilisateur

Buffalo

Buffalo HD-PHS series Manuel utilisateur

Buffalo

Buffalo DriveStation HD-HC160U2 Manuel utilisateur

Buffalo

Buffalo TeraStation Pro TS-TGL/R5 Manuel utilisateur

Buffalo

Buffalo DriveStation HD-CEIU2 Manuel utilisateur

Buffalo

Buffalo AirStation Pro WLA-AWCG Manuel utilisateur

Buffalo

Buffalo DriveStation Combo Manuel utilisateur

Buffalo

Buffalo MiniStation HD-PXU2 Manuel utilisateur

Buffalo

Buffalo TeraStation Live Manuel utilisateur

Buffalo

Buffalo TS6400DN0802 Manuel utilisateur

Buffalo

Buffalo SSD-WA256T Manuel utilisateur

Buffalo

Buffalo HD-PH100U2 Manuel utilisateur

Buffalo

Buffalo HD-HCU2 DriveStation Manuel utilisateur

Buffalo

Buffalo HD-PXT1TU2 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur