BubblyNet G4 Manuel utilisateur
G4 + G7 TOUCHSCREEN INSTALLATION INSTRUCTIONS
WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. DEVICE MUST BE INSTALLED BY
A QUALIFIED ELECTRICIAN ONLY. DEVICE IS INTENDED FOR INSTALLATION IN
ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCALAND FEDERAL
SPECIFICATIONS. DISCONNECT POWERAT ELECTRICAL PANEL BEFORE SERVICING.
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
CUTOUT TABLE
TOUCHSCREEN CUTOUT
4” SCREEN 4.7” X 3.3”
7” SCREEN 7.125” X 4.725”
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts
no liability for consequential damage which is occasioned to the user based on the data provided.
TOUCHSCREEN INSTALLATION
1. MAKE A CUT OUT AS PER THE CUTOUT TABLE IN THE WALL USING APPROPRIATE CUTTING
TOOL. CUT OUT CAN BE LANDSCAPE OR POTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C
AND ETHERNET CABLE THROUGH THE CUT OUT. (FIGURE 1)
2. CONNECT THE USB-C AND ETHERNET CABLE TO THE TOUCH SCREEN. USB-C IS FOR POWER
AND NECESSARY FOR OPERATION, ETHERNET IS OPTIONAL BUT RECOMMENDED.(FIGURE 2)
3. PULL THE SPRINGS BACK ( FIGURE 3)
4. INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.
(FIGURE 4)
5. FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.
(FIGURE 5)
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no
liability for consequential damage which is occasioned to the user based on the data provided.
1 2 3
45
ETHERNET
CABLE USB-C
WIRING DIAGRAM
BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com
The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no
liability for consequential damage which is occasioned to the user based on the data provided.
•Consult Spec Sheet for full data on voltage range and current compatibility.
For best results, drivers need to be installed within 30 feet of the closest device within the Bluetooth Mesh
network. Signal strength significantly decreases in presence of metal barriers such as when devices are
enclosed in metal boxes.
INPUT POWER: 5V, 3A, USB-C
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels BubblyNet écran tactile
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
