Broadata Communications LINKBRIDGE LBC-PSW41E Manuel utilisateur
LINKBRIDGE™ HDBASET
18G/4K MULTI-FORMAT
PRESENTATION TRANSMITTER
with 4-PLAY and 48V PoC
BCI reserves the right to make changes to the products described herein without
prior notice or consent. No liability is assumed as a result of their use or application.
All rights reserved.
©2019 Broadata Communications, Inc.
LBC-PSW41E
USER MANUAL
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
SAFETY INSTRUCTIONS AND COMPLIANCE DECLARATION
PLEASE OBSERVE THE FOLLOWING SAFETY PRECAUTIONS
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes,surges,electric shock,lightning strikes, etc. Use of surge proctection
system is highly recommended in order to protect and extend the life of your
equipment.
SAFETY INFORMATION
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
Do not use this device near water/liquids. This device should not be exposed to dripping and
splashing or liquids.
Clean only with dry cloth.
Do not use solvents such as paint thinners and acetone to clean external casing. Such
agents will remove any labels on the device.
Do not block any ventilation openings.
Do not install near any sources of intense heat such as radiation, boilers, or other equipment
that produce heat
Not intended for use/storage in close proximity of critical medical supplies such as those that
might come into direct contact with patients or medical sta.
Protect the power cord from being pinched or damaged at receptacles and the point of exit
from the device.
Only use attachment /accessories specified by manufacturer. If you have any questions
about the compatibility of an accessory, contact your dealer.
In case liquid spillage on device, unplug mains power cord and contact your dealer. Continu-
ous use in this case may result in fire or electric shock.
To reduce the risk of electric shock, do not touch connectors with wet hand.
Only power with the marked voltage on the device. Any other voltage can cause fire or elec-
tric shock.
Do not use the device if an abnormality occurs. If any smoke or odor becomes apparent, un-
plug the power cord and contact your dealer. Do not try to repair the device yourself.
Avoid using physically damaged devices. If your device metal housing is seriously physically
damaged, the internal components may function abnormally. Contact your dealer.
Do not install the device in an area heavy with dust or constant high humidity. Operating the
device in this case may result in fire or electric shock.
Only use supplied power supply. For a list of other compatible power supplies, contact your
dealer.
Install this device in a secure location where it cannot be easily pushed or knocked over.
TABLE OF CONTENTS
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
PRODUCT DESCRIPTION
OPERATION CONTROL AND FUNCTIONS
FRONT/REAR PANEL
CONNECTOR PIN OUT ASSIGNMENT
WEB GUI CONFIGURATION
API COMMANDS RS232 & TELNET
CONNECTION DIAGRAM
SPECIFICATIONS
MAINTENANCE AND TROUBLESHOOTING
SERVICE PROCEDURE
REPLACEMENT POLICY
RETURN AND REPAIR SERVICE
LIMITED WARRANTY
5
7
7
10
11
25
34
35
38
39
39
39
40
1.0
2.0
2.1
3.0
4.0
5.0
5.1
5.2
6.0
7.0
8.0
9.0
10.0
5
PRODUCT DESCRIPTION
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
The LBC-PSW41E is capable of extending UHD+ video, audio and control over a single run of CAT 5e/6/7
cable up to 40 meters*. The extender complies with HDCP 2.2 and 18G HDMI standards, and supports
legacy HDCP 1.x and HDMI 1.x standards. It also supports 4K UHD HDMI, DP 1.2, & USB-C video sources, up
to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources, that can be processed and automatically
scaled to 1080p while staying within HDBaseT’s 10.2Gbps bandwidth specification. VGA input supports
resolution up to WUXGA (RB) and 3.5 audio input can be embedded with video. Multiple data and control
interfaces can be extended through IR, and RS-232 connections. 48V PoH (Power over HDBase-T) oers
greater installation flexibility by allowing compatible receivers to be powered by the transmitter.
*CAT6a/7 cable recommended to ensure maximum distance.
FEATURES:
• HDMI with DisplayPort 1.2, and DVI 1.0 compatible
• HDCP 1.x and HDCP 2.2 compliant
• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
• VGA input supports resolution up to WUXGA (RB)
• Analog stereo audio is automatically embedded with the video from the VGA input
• Supports HDBaseT feature set: HD Video & Audio PoH, and Control Extension (Bi-directional IR/RS-232)
• Supports standard PoH from the unit to connect HDBase-T Receivers (compatible Receivers only)
• Supports manual input selection or automatic input selection with hot plug detection and “Last Memory”
feature
• Basic signal event automation using CEC commands
• Comprehensive EDID management
• USB Type C port provides up to 60W to power or charge connected device
• Controllable via a front panel button, WebGUI, Telnet, and RS-232
IDEAL FOR:
• Household entertainment sharing and control
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
6PRODUCT DESCRIPTION
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
PACKAGE CONTENTS
• 1- HDBaseT Multi-Format Presentation Transmitter with 4-Play and 48V PoC
• 1- 24V/3.75A DC Power Adapter
• 1- Power Cord
• 1- 3.5mm to IR Blaster Cable
• 1- 3-pin Terminal Block
• 1- Operation Manual
SYSTEM REQUIREMENTS
• Source equipment such as media players, video game consoles, PCs, or set-top boxes.
• A compatible HDBaseT receiver with PoH (PD) support is recommended.
• The use of Premium High Speed HDMI cables, and industry standard Cat.6, Cat.6a or
Cat.7, is highly recommended.
7
OPERATION CONTROL AND FUNCTIONS
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
FRONT PANEL
LBCPSW41E
1
Service Port: This port is reserved for firmware update use only.
Control Port: Connect directly or through a network switch, to control your
PC/laptop to control the unit via Telnet/WebGUI.
Power LED: This LED will illuminate to indicate the unit is on and receiving
power.
Select Button: Press the Select button to sequentially switch through the
available inputs.
VGA/USB-C/HDMI/DP LED: The currently selected input’s LED will
illuminate green. The LEDs will illuminate red
to indicate inputs that have live sources but are
not currently selected.
1
2
3
4
3
5
2
SELECT
SERV. CONTROL POWER
VGA USB-C HDMI DP
45
8OPERATION CONTROL AND FUNCTIONS
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
REAR PANEL
LBCPSW41E
VGA Input: Connect to VGA source equipment such as a PC or laptop.
Audio Input: Connect to the stereo analog output of the device connected to
the VGA input port.
USB-C Input: Connect to USB Type-C video source equipment such as a PC
or laptop.
Note: Not all devices with USB Type-C ports can support video output.
Please verify that the device supports video output from the
USB Type-C port before connecting it.
HDMI Input: Connect to HDMI source equioment such as a PC or laptop
DisplayPort Input: Connect to DisplayPort source equipment such as a PC
or laptop.
CAT5e/6/7 Input: Connect to a compatible HDBaseT Receiver with a single
Cat.5e/6/7 cable for transmission of all data signals. PoH
will also be supplied to a connected compatible PD
Receiver.
1
2
3
4
5
13
245
DC 24V
RS-232
VGA AUDIO USB-C HDMI DP CAT5e/6/7 OUT
T X R X G
CONSOLE
IR
EXTENDER BLASTER
IN
6789
6
9
OPERATION CONTROL AND FUNCTIONS
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
REAR PANEL
LBCPSW41E
DC 24V
RS-232
VGA AUDIO USB-C HDMI DP CAT5e/6/7 OUT
T X R X G
CONSOLE
IR
EXTENDER BLASTER
IN
7810
IR Extender Port: Connect to an IR Extender to receive IR control signals
and extend them to devices connected to the other end
of the HDBaseT connection. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
IR Blaster Port: Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices
within direct line-of-sight of the IR Blaster.
RS-232 Port: Connect directly to a PC, laptop, or other serial control
device with a 3-pin adapter cable to send RS-232
commands to control the unit.
RS-232 Bypass Port: Connect to a PC, laptop, or other serial control
device with a 3-pin adapter cable for the extension
of RS-232 signals to the Receiver.
DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
7
8
9
9
10
10 CONNECTOR PINOUT ASSIGNMENT
HDBaseT 18G/4K Multi-Format Presentation Transmitter w/ 4-Play and 48V PoC User Manual (LBC-PSW41E)
1
2
3
Power
Infared
Not Used
1
2
3
Power
Infared
Ground
RS-232 Pin Out
SERIAL PORT DEFAULT SETTINGS
BAUD RATE 19200
DATA BITS 8
PARITY BITS NONE
STOP BITS 1
FLOW CONTROL NONE
Console
IR Cable Pin Outs
IR Blaster Pin Out IR Extender
1
2
3
GND
RxD
TxD
3-Pin Terminal Block
Bypass
1
2
3
GND
RxD
TxD
3-Pin Terminal Block
Table des matières
Autres manuels Broadata Communications Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
