Brickcom VD-E400Af Instructions d'utilisation

Hardware User’s Manual

Megapixel Day & Night

Vandal Dome Network Camera

VD-E400Af

Table of Contents

Before You Use This Product .......................................................................................1

Regulatory Information.................................................................................................2

Chapter 1 - Package Contents......................................................................................3

Chapter 2 - Vandal Dome Network Camera Overview ................................................4

Chapter 3 - Device Appearance Description ...............................................................5

Chapter 4 - LED Behavior .............................................................................................6

Chapter 5 - Installation..................................................................................................6

5.1 Hardware Installation..........................................................................................6

5.2 Camera Connection............................................................................................8

5.3 System Requirements........................................................................................9

5.4 Software Installation .........................................................................................10

5.4.1 EasyConfig............................................................................................ 13

Before You Use This Product

In many countries, there are laws prohibiting or restricting the use of surveillance

devices. This Network Camera is a high-performance, web-ready camera which can be

part of a flexible surveillance system. It is the user’s responsibility to ensure that the

operation of this camera is legal before installing this unit for its intended use.

Upon opening the product’s package, verify that all the accessories listed on the

“Package Contents” are included. Before installing the Network Camera, read the

warnings in the “Quick Installation Guide” to avoid misuse. When installing the Network

Camera, carefully read and follow the instructions in the “Installation” chapters to avoid

damages due to faulty assembly or installation.

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are

country dependent and are firmware programmed at the factory to match the

intended destination. The firmware setting is not accessible by the end user.

Chapter 1 - Package Contents

a. Network Camera

b. Location Sticker

c. Product CD

d. Warranty Card

e. Easy Installation Guide

f. Screw Bag,

g. Wall-Mount Bracket: VDMD-B-WALL (Optional)

h. High Power PoE (Optional)

(Please refer to bottom message)

Waterproof connector

The product is intended to be supplied by a Listed Power Unit marked “L.P.S”(or “Limited Power Source”) and rated

output 24V AC, 50/60 Hz, 0.7A minimum or 12V DC, 1A minimum or 48V DC, 0.25A minimum”

“The product shall be installed by a qualified service person and the installation shall conform to all local codes”

“The product is to be connected to only PoE networks without routing to the outside plant

Chapter 2 - Vandal Dome Network Camera

Overview

The VD-E400Af vandal dome network camera features the 4-megapixel CMOS sensor,

IR-cut filter, IR LEDs, auto light sensor, and is designed to provide the 24-hour indoor

and outdoor surveillance.

The VD-E400Af is designed to provide the high-quality video feed for security system.

The embedded high-performance image sensor and CPU allow the camera to stream

the real-time, high-resolution video at 30 fps. The camera supports many video codecs,

including MJPEG and H.264. H.264 can reduce the bandwidth and storage

requirements without compromising the video quality.

Installation is simplified with the support for Power over Ethernet (PoE), which enables

the camera to receive power and transmit data through the same cable. The camera's

vandal-proof enclosure protects itself from damage caused by vandalism or harsh

environments. With the IP66-certified enclosure, the VD-E400Af is not only water

resistant, but also dust and rust resistant.

The included EasyConfig software offers the users the easy installation without the

need for a strong technical background. The design makes the VD-E400Af the

perfect security camera for the school, retail stores, or restaurant surveillance system.

Chapter 3 - Device Appearance Description

NOTE- Before installing, please make sure all the IR LED are NOT been

covered or it will cause refraction.

NOTE- To avoid damaging inner cables, please avoid turning around the

rotation set over 3 laps.

Please adjust VD-E400Af Series lens+LEDs in 62.5 degree as picture bellowed for

better optical performance and surveillances.

Chapter 4 - LED Behavior

Function

LED Behavior

Description

Ethernet Link

Continuous illumination (Green)

Ethernet Connected

Data Link

Blinking (Orange)

Data Transmitting

Chapter 5 - Installation

5.1 Hardware Installation

a. Use the enclosed Allen key to detach the dome cover from the camera device.

b. Put the three waterproof rubbers which are provided in the product package into the

location holes.

c. Hammer the three plastic anchors which are provided in the product package into the

three location holes. The user needs the three screws which are included in the product

package and a screwdriver. Mount the camera on the wall or ceiling and position the

three screw slots over the plastic anchors. Insert the screws into the holes and use the

screwdriver to tighten the screws clockwise until they are secure.

(* Please make sure the three location holes are tightly sealed for better waterproof

function)

The Reset Button can be used to restore the camera to factory default settings. If the

camera experiences a problem, rebooting the camera may correct the problem. If the

problem remains, please restore the camera to factory default settings and set it up

again.

To Reset

Press and hold the Reset Button for more than 10 seconds using a paper clip or thin

object. Wait for the camera to reset to default.

NOTE - By resetting the camera, all settings will be restored to the factory default

settings.

5.2 Camera Connection

The VD-E400Af is DC12V and PoE compliant, so there are two options for connecting the

camera to a power and Ethernet source. The camera can either be connected to a PoE-enabled

switch or a non-PoE switch.

a. If using a PoE-enabled switch:

Use a single Ethernet cable to connect the camera to the PoE-enabled switch.

b. If using a non-PoE switch:

i. Use a standard RJ-45 cable to connect the camera to a PoE Injector.

ii. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch.

iii. Use a standard power cable to connect the PoE Injector to a power outlet.

c. If using the DC12V power supply. The RJ45 Ethernet cable will be for

data transmission only.

Table des matières

Autres manuels Brickcom Caméra de sécurité

Brickcom

Brickcom VD-100A Manuel utilisateur

Brickcom

Brickcom FB-130Np Series Manuel utilisateur

Brickcom

Brickcom OB-130Np Instructions d'utilisation

Brickcom

Brickcom OB-502Ae V5 Series Instructions d'utilisation

Brickcom

Brickcom PZ-040 12x Series Manuel utilisateur

Brickcom

Brickcom MD-100A series Manuel utilisateur

Brickcom

Brickcom Fixed Box Series Manuel utilisateur

Brickcom

Brickcom FD-100A Series Manuel utilisateur

Brickcom

Brickcom FB-100A Series Manuel utilisateur

Brickcom

Brickcom VD-130A V2 Series Manuel utilisateur

Brickcom

Brickcom FB-100Ap Series Instructions d'utilisation

Brickcom

Brickcom Vandal Dome Series Fiche technique

Brickcom

Brickcom Bullet Series Instructions d'utilisation

Brickcom

Brickcom MD-300Np-A4-Star Fiche technique

Brickcom

Brickcom MD-100A series Manuel utilisateur

Brickcom

Brickcom FD-100A Series Manuel utilisateur

Brickcom

Brickcom OB-E400AF Instructions d'utilisation

Brickcom

Brickcom FB-H200Np-S-WDRPro Fiche technique

Brickcom

Brickcom OB-500Af Series Fiche technique

Brickcom

Brickcom Vandal Dome V2 Series Manuel utilisateur

Brickcom

Brickcom VD-E200Af series Instructions d'utilisation

Brickcom

Brickcom Mini Box Series Manuel utilisateur

Brickcom

Brickcom FB-100Ae Series Fiche technique

Brickcom

Brickcom MD-500Ap Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur