BOXLIGHT Seattle X30N Manuel utilisateur

NE 151 Highway 300, Suite A

PO Box 2609

Belfair, WA 98528

360.464.2119

www.boxlight.com

Seattle X30N

About the Owner’s Manual

Features

Please read the owner’s manual thoroughly to ensure correct usage of the projector and its

features.

After reading, store the owner’s manual in a safe place for future reference.

1. Dress up Design

2. Designed for tough environment

3. Side change lamp

 6LGHFKDQJH¿OWHU

5. Quick off

6. Advanced Anti-theft features

7. Five auto features (Auto Search, Auto Sync, Auto Ceiling, Auto Keystone and Auto

Filter Alert)

8. Seven display modes (Natural, Cinema, User, Green board, White Board, Black Board

and Daylight)

9. Built-in 8W speaker

10. Logo capture

11. Image freeze function

12. Digital zoom adjustment

The content of this manual is subject to change without previous notice.

Issue of edition 0809.10_01

Projector

Control Panel Window Introduction

n

Power Control

Icon Name

Power on

Power off

o

Input Source

Icon Name

Video

S-Video

Y,Pb,Pr

DVI-I

RGB 1

Change Input Source

p

Function Key

Icon Name Icon Name

Up Freeze

Down Blank

Left Keystone Correction +

Right Keystone Correction -

Menu Increase Brightness

Auto Sync Decrease Brightness

Mute Higher Contrast

Control Panel Window Introduction

p

Function Key

Icon Name

Lower Contrast

Zoom In

Zoom Out

Volume Up

Volume Down

q

Projector Status

Icon Name

System Status

Input Source Status

Lamp Timer

Air Filter Timer

Control Panel Window Introduction

n

Network Control Window introduction

Icon Name Description

Scan all Capture the projector information 1 time only.

Start Auto Scan According to the system setting, get the projector

information automatically.

Stop Auto Capture

Auto Search Search the projector in the same network to

Open Project File 2SHQSURMHFW¿OHZKLFKZDVVDYHG

Save Project File Save the registered projector in this project.

System Setting Setting the projector system remind message.

About Icon content description.

Exit Exit the Network software.

Exit

Maintenance Of Projector

Maintenance of Projector

Air Filter

:KHQDZDUQLQJPHVVDJHDSSHDUVWRUHPLQG\RXWRFOHDQWKHDLU¿OWHU

please replace a new one as soon as possible. Please check and clean the

DLU¿OWHUSHULRGLFDOO\

Replacing the Air Filter

:KHQWKHXVHWLPHUHDFKHVWKH¿OWHUFRXQWHUWLPHWKHSURMHFWRUZLOO

GLVSOD\DPHVVDJHWKDWLQGLFDWHVWRUHSODFHDQHZ¿OWHU,IWKHUHLVQRVSDUH

DLU¿OWHUDYDLODEOHSOHDVHFRQWDFW\RXUGHDOHU

7XUQRIIWKHSURMHFWRUDQGXQSOXJWKHSRZHUFRUG$OORZWKHSURMHFWRUWRVXI¿FLHQWO\

cool down.

n

5HPRYHWKH¿OWHUFRYHUIURPWKHULJKWVLGHRISURMHFWRU

o

3XOORXWWKHDLU¿OWHU

p

,QVWDOODQHZDLU¿OWHU

q

3XWWKH¿OWHUFRYHURQ

r

5HVHW¿OWHUWLPHUDIWHUFOHDQLQJRUFKDQJLQJDLU¿OWHU3

New one

3OHDVHFOLFNKHUHLI\RXUSURMHFWRULVZLWKKLJKHI¿FLHQF\¿OWHU

Maintenance of Projector

Lamp

1. If you want to replace new lamp, but the projector was just turned off,

please let the projector cool down and unplug power cord at least 60

minutes.

2. If the projector is mounted in the ceiling, contact your dealer to replace

the lamp.

Replacing New Lamp

1. Remove the lamp door.

2. Loosen 2 screws of the lamp holder. Take the handle on the top of the

lamp, pull out the lamp straight off the projector.

,QVHUWQHZODPSORFNWKHODPSGRRU¿UPO\ZLWKVFUHZV

4. Put the lamp door on.

5. Please reset the lamp timer after replacing lamp. (P.34)

ACIN

3OHDVHFOLFNKHUHLI\RXUSURMHFWRULVZLWKKLJKHI¿FLHQF\¿OWHU

Maintenance of Projector

WARNING

The projector uses a high-pressure mercury lamp.

The explosion of lamp with a loud bang or burn out could possibly cause

LQMXU\RUD¿UH

:KHQWKHEXOEEXUWVLWLVSRVVLEOHIRUVKDUGVRIJODVVWRÀ\LQWRWKHODPS

housing; and for gas containing mercury to escapefrom the projector’s

vent holes.

If the lamp has broken, do not check the inside of the projector. Please

ventilate the room immediately.

Do not touch or bring your face close to the broken pieces since it might

get into your eyes or mouth. In case of injury, seek medical advice

immediately.

Disposal of a Lamp

Dispose of a lamp in accordance with the local recycling laws.

Do not put it to your trash.

Recycling Lamp’s laws of the USA, go to www.lamprecycle.org.

Recycling Product’slaws of USA, go to www.eiae.org.

Recycling Product’slaws of Canada, go to www.epsc.ca.

For more information about recycling laws, please contact local

government agency or dealer

CAUTION HOT

Before replacing the Lamp part, pay attention to the following items:

1.The Lamp is optional part. Contact the dealer for replacement lamp.

2.The lamp becomes very hot when in use. Turn the power off and

disconnect the power cord.

3.Wait 1 Hour before replacing the lamp.

4.Do not use old lamp part.

Maintenance of Projector

Other Care

Cleaning The Lens

If the lens is dirty and dusty, display quality maybe decreased. Before

cleaning the lens, please make sure that the projector is cool down

adequately.

After the projector has cooled down adequately, lightly wipe the lens with

the available lens-cleaning cloth.

Do not touch the lens directly with your hand.

Additional

-In order to ensure the safe use of your projector, please contact your

dealer to inspect about once a year.

-Before maintenance, make sure the power cable is unplugged, allow the

SURMHFWRUWRFRROVXI¿FLHQWO\7KHKLJKWHPSHUDWXUHVWDWHRIWKHSURMHFWRU

could cause a burn in and/or malfunction to the projector.

-Never try to maintain the inside of the projector by yourself

Troubleshooting

Indicator

The power and lamp indicators show the status of the projector. Before requesting repair,

check the projector status using the chart below. If the problem cannot be resolved,

contact your dealer.

In normal status~~~

POWER LAMP CONDITIONS DESCRIPTION

Blinking In

Green Off Stand by mode Projector is ready to be turned on.

Lighting In

Green Off On mode Projector is on and operating.

Lighting In

Green

Blinking In Red

( Slow ) Cool down mode Projector is in cool down mode

and will not respond to user input.

In abnormal status~~~

POWER LAMP CONDITIONS DESCRIPTION

Blinking In

Green

Blinking In Red

( Fast ) Fan fault mode

The projector has detected a

problem of a slow internal fan

speed. The lamp will shut off

automatically. Contact your

dealer.

Blinking In

Green Lighting In Red Lamp cover open

The lamp cover is open or there

is a problem with the lamp. If the

lamp door is closed and replacing

the lamp does not correct the

issue, contact your dealer.

Blinking

In Green (Fast)

Blinking In Red

( Fast ) High temperature

The projector has overheated and

shut itself down.

Correct the over temperature

condition immediately.

1. Check that the ventilation slots

are free from obstructions.

2. Check the cleanliness of the air

¿OWHU

Blinking In

Green (Slow)

Blinking In Red

(Slow) Lamp fail

The lamp does not light. Come

back to “ stand by mode ”, and

press the power button.

Autres manuels pour Seattle X30N

Table des matières

Autres manuels BOXLIGHT Projecteur

BOXLIGHT

BOXLIGHT PRO6501DP Manuel utilisateur

BOXLIGHT

BOXLIGHT Route66 Manuel utilisateur

BOXLIGHT

BOXLIGHT CP755ew Manuel utilisateur

BOXLIGHT

BOXLIGHT MP-60e Manuel utilisateur

BOXLIGHT

BOXLIGHT DLP Manuel utilisateur

BOXLIGHT

BOXLIGHT P9 WX33NST Manuel utilisateur

BOXLIGHT

BOXLIGHT N12 BNW Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-33t Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-11t Manuel utilisateur

BOXLIGHT

BOXLIGHT PRO80S3 Manuel utilisateur

BOXLIGHT

BOXLIGHT Seattle Series Manuel utilisateur

BOXLIGHT

BOXLIGHT MP-385t Manuel utilisateur

BOXLIGHT

BOXLIGHT ProjectoWrite7 P7 WX32N Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-306t Manuel utilisateur

BOXLIGHT

BOXLIGHT MP-350m Manuel utilisateur

BOXLIGHT

BOXLIGHT MP-57i Manuel utilisateur

BOXLIGHT

BOXLIGHT Cinema 17SF Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-13t Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-731i Manuel utilisateur

BOXLIGHT

BOXLIGHT XP-8t Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-7t Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-730e Manuel utilisateur

BOXLIGHT

BOXLIGHT SP-10t Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-15t Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur