Bosch REG-D1-875XE-01 Manuel utilisateur
INSTALLATION
INSTRUCTIONS
REG-D1
MAN-REG-D1-03
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep this instruction.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with manufacturer instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the power where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in a way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
IMPORTANT
For best results, please read this Instruction Booklet prior
to installing the REG-D1 camera.
WARNING !
CSA Certified / UL Listed CLASS 2 power adaptors must
be used in order to comply with electrical safety standards.
This installation should be made by a qualified service
person and conform to all local codes.
Bosch Security Systems, Inc. will not be responsible for
injuries or damages resulting from the improper installation
or use of any camera sold by Bosch Security Systems,
Inc., their agents, distributors or dealers.
EU Directives covered by this declaration:
72/9/EC Low Voltage Directives
89/336/EEC Electromagnetic Compatibility Directive
NOTE: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. As part of its normal operation this
device can generate radio frequency energy and if not
installed and used in accordance with the installation
manual may cause interference to radio communications.
However, there is no guarantee that interference will not
occur on a particular installation. If the device does cause
interference to radio or television reception the user is
encouraged to try to correct the interference by one or
more of the following measures:
1) Fit Ferrite beads on all cable to and from the power
supply box, within the box walls.
2) Route the composite cable between the camera and the
power supply in steel conduit piping over the entire run of
the cable up to and including connection to a deep conduit
base fitted under the camera and a conduit fitting adaptor
in the wall of the PSU box.
3)Contact Bosch Service Center for further advice.
INDEX – REG - D1 Camera
Description………………………………………………...1
Unpacking………………………………………………....2
Parts List…………………………………………………..2
Items Required for Installation…………………………..2
Initial Preparations………………………………………..3
Guidelines………………………………………………....3
1. Mechanical Specification REG-D1………………....4
2. Input Power / Video Output Connections………….5
3. Mounting Specification………..……………………..6
4. Color Overview Camera Lens Setting…………… 10
5. Troubleshooting…………...…………………… …..14
6. General specifications…………..……………… … 18
- 1 -
DESCRIPTION
The REG-D1 license plate capture camera unit consists of
one IR-sensitive monochrome camera, one integrated panel
of Infrared LEDs, and one color overview camera. The
license plate capture camera produces optimum license plate
images during day and night settings in all-weather
conditions. The camera has optical filtering technology that
help block out unwanted ambient light such as headlamps or
sunlight, thus ensuring no bloomed-out or washed-out images
of the license plates.
The REG-D1 camera you have purchased is designed and
configured to capture images of license plates under a wide
range of ambient light to weather conditions.
The all-weather housing with a covert acrylic window contains
all the electronics. Low voltage operation, low power
consumption, LED illuminator, and solid-state CCD
technology make this camera very reliable and efficient.
A voltage regulator circuit allows for DC or AC operation
between 12 and 24 VAC/VDC. It also provides protection
from voltage surges, transient spikes, and reverse voltage.
- 2 -
UNPACKING
Care should be taken when unpacking the shipped unit.
Check the parts list and confirm all items have been
located. Inspect the equipment thoroughly to ensure
nothing was damaged in transit.
Contact Bosch Service Center if a problem is noted,
see the rear page of this booklet for contact numbers.
PARTS LIST (items supplied with unit)
-REG-D1 camera assembly
-Installation Instructions booklet
-One
3mm Allen key
ITEMS REQUIRED FOR INSTALLATION (not
supplied with units)
•Mounting hardware
•Mounting tools
•Proper Power Supply
- 3 -
INITIAL PREPARATIONS
•Determine the operating voltage at the
installation site. The camera‘s Voltage Regulator
Board accepts both 12-24VDC/VAC input
without change to internal connections.
See Section 2, Input Power Connections.
•Determine the optimum location for the camera.
See Section 3, Mounting Specification.
•All cameras have been tested prior to shipment.
After the wiring has been reconnected, it is
advisable to check the camera’s operation
before installation.
GUIDELINES
The installation of the REG-D1 camera is explained in
Sections 1 to 3.
It is important that these steps are followed and to
practice proper installation procedures with proper safety
equipment.
- 4 -
1. MECHANICAL SPECIFICATIONS–REG D1
(See Section 6 - General Specifications, for more information)
Front View SideView
Bottom View
*Optional mounting kits: EXMB028 or EXMB029
Figure 1 General Mechanical Specifications
Autres manuels pour REG-D1-875XE-01
1
Ce manuel convient aux modèles suivants
7
Table des matières
Autres manuels Bosch Caméra de sécurité
Bosch
Bosch FlexiDomeXF VDC-485V03-10 Manuel utilisateur
Bosch
Bosch EX72C7V0922-N Manuel utilisateur
Bosch
Bosch NDN-932 Manuel utilisateur
Bosch
Bosch Compact Day-Night WZ14N4-0 (NTSC) Manuel utilisateur
Bosch
Bosch MIC IP fusion 9000i Manuel utilisateur
Bosch
Bosch VDN-498V03-21S Manuel utilisateur
Bosch
Bosch AUTODOME IP starlight 5100i Manuel utilisateur
Bosch
Bosch DINION IP imager 9000 HD Manuel utilisateur
Bosch
Bosch MIC Series 400 Manuel utilisateur
Bosch
Bosch VDC-250 Manuel utilisateur
Bosch
Bosch UPH Series Manuel utilisateur
Bosch
Bosch LTC0485/11 Manuel utilisateur
Bosch
Bosch LTC 1312/20 FlexiDome I Manuel utilisateur
Bosch
Bosch VJR-A3-IC Manuel utilisateur
Bosch
Bosch NDN-733-V03IP Manuel utilisateur
Bosch
Bosch VG4-322-ECS0WF Manuel utilisateur
Bosch
Bosch IP micro 2000 Instructions d'utilisation
Bosch
Bosch AN bullet 2000 IR Manuel utilisateur
Bosch
Bosch VDx-244 Manuel utilisateur
Bosch
Bosch DINION IP starlight 7000 HD Manuel utilisateur
