Bosch GLM 15 Instructions de montage

IMPORTANT: IMPORTANT: IMPORTANTE:

Read Before Using Lire avant usage Leer antes de usar

Operating/Safety Instructions

Consignes d’utilisation/de sécurité

Instrucciones de funcionamiento y

seguridad

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com

Call Toll Free for

Consumer Information

& Service Locations

Pour obtenir des informations

et les adresses de nos centers

de service après-vente,

appelez ce numéro gratuit

Llame gratis para

obtener información

para el consumidor y

ubicaciones de servicio

For English Version Version française Versión en español

See page 6 Voir page 18 Ver la página 33

GLM 15

-2-

-3-

GLM 15

-4-

1’ 6” (0.5m)

8’ (2.45m)

1’ 6” (0.5m)

-5-

-6-

General Safety Rules

Read all instructions. Failure to follow

all instructions listed below may result

in hazardous radiation exposure, electric shock, fire

and/or serious injury. The term “tool” in the warnings listed

below refers to your mains-operated (corded) tool or battery-

operated (cordless) tool.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The following label is on your

laser tool for your safety.

ALWAYS BE AWARE of their

location when using the tool.

DO NOT direct the laser

beam at persons or

animals and do not stare into the laser beam

yourself. This tool produces class 2 laser

radiation and complies with 21 CFR 1040.10 and 1040.11

except for deviations pursuant to Laser Notice No. 50, dated

June 24, 2007. This can lead to persons being blinded.

WARNING

Safety Rules

Working safely with the

measuring tool is possible

only when the operating and

safety information are read

completely and the instructions

contained therin are strictly

followed. Never make warning

labels on the Measuring tool

unrecognizable.

Never aim the beam at a

workpiece with a reflective

surface. Bright shiny reflective

sheet steel or similar reflective

surfaces are not recommended

for laser use. Reflective surfaces

could direct the beam back

towards the operator.

Take care to recognize the

accuracy and range of the

device. Measurement may not be

accurate if used beyond the rated

range of the device.

Use of controls or adjustments

or performance of procedures

other than those specified

herein may result in hazardous

radiation exposure.

-7-

The use of optical instruments

with this product will increase

eye hazards.

Have the measuring tool

repaired only through qualified

specialist using original spare

parts. This ensures that the safety

of the measuring tool is maintained.

Do not allow children to use

the measuring tool without

supervision. They could

unintentionally blind other persons.

Do not point the laser beam

at persons or animals and do

not look into the laser beam

yourself, not even from a large

distance.

Do not use the laser viewing

glasses as safety goggles. The

laser viewing glasses are used for

improved visualization of the laser

beam, but they do not protect

against laser radiation.

Do not use the laser viewing

glasses as sun glasses or

in traffic. The laser viewing

glasses do not afford complete

UV protection and reduce color

perception.

Be sure to read and understand

all instructions in this manual

before using this product.

Failure to follow all instructions

may result in hazardous radiation

exposure, electric shock, fire, and/

or bodily injury.

Use of controls or adjustments

or performance of procedures

other than those specified

in this manual, may result in

hazardous radiation exposure.

The use of optical instruments

with this product will increase

eye hazard.

ALWAYS: Make sure that any

bystanders in the vicinity of use

are made aware of the dangers

of looking directly into the

measuring tool.

DO NOT remove or deface

any warning or caution labels.

Removing labels increases

the risk of exposure to laser

radiation.

DO NOT stare directly at the

laser beam or project the laser

beam directly into the eyes of

others. Serious eye injury could

result.

DO NOT place the measuring

tool in a position that may

cause anyone to stare into

the laser beam intentionally or

unintentionally. Serious eye injury

could result.

DO NOT use any optical tools

such as, but not limited to,

telescopes or transits to view

the laser beam. Serious eye injury

could result.

ALWAYS remove the batteries

when cleaning the laser light

aperture to laser lens.

Safe Operating Procedures

-8-

DO NOT operate the measuring

tool around children or

allow children to operate the

measuring tool. Serious eye injury

could result.

ALWAYS turn the measuring

tool “OFF” when not in use.

Leaving the measuring tool “ON”

increases the risk of someone

inadvertently staring into the laser

beam.

DO NOT operate the measuring

tool in combustible areas such

as in the presence of flammable

liquids, gases or dust.

ALWAYS position the

measuring tool securely.

Damage to the measuring tool

and/or serious injury to the user

could result if the measuring tool

falls.

ALWAYS use only the

accessories that are

recommended by the

manufacturer of your measuring

tool. Use of accessories that have

been designed for use with other

measuring tools could result in

serious injury.

DO NOT leave measuring tool

“on” unattended in any operation

mode.

Repair and servicing must

always be performed by a

qualified repair facility. Repairs

performed by unqualified personnel

could result in serious injury.

DO NOT use this measuring

tool for any purpose other than

those outlined in this manual.

This could result in serious injury.

DO NOT disassemble the

measuring tool. There are no

user serviceable parts inside.

Disassembling the laser will

void all warranties on the

product. Do not modify the

product in any way. Modifying

the measuring tool may result

in hazardous laser radiation

exposure.

Electrical safety

Batteries can explode or leak,

cause injury or fire. To reduce

this risk, always follow all

instructions and warnings on

the battery label and package.

DO NOT short any battery

terminals.

DO NOT charge alkaline

batteries.

DO NOT mix old and new

batteries. Replace all of them

at the same time with new

batteries of the same brand

and type.

DO NOT mix battery

chemistries.

Dispose of or recycle batteries

per local code.

DO NOT dispose of batteries

in fire.

Keep batteries out of reach of

children.

Remove batteries if the device

will not be used for several

months.

-9-

Alerts user to

warning messages

Warning Symbol Read Manual Symbol

Alerts user to read manual

Symbols

Features

1On/Off (Hold button)

2 Display

3 Battery lid

4Latch of battery lid

5Serial number

6Laser warning label

7Reception lens

8Laser beam outlet

Display Elements

aBattery low indicator

bTemperature warning

cLaser switched on

dMeasurement hold

ePrevious measuring value

fUnit of measure

gCurrent measuring value

Digital Laser Measure GLM 15

Article Number 3601K72810

Measuring range (typical) 6 in - 50 ft (0.15 –15 mA)

Measuring accuracy (typical) ±1/8 in (±3.0 mmB)

Lowest indication unit 1/16 in (1 mm)

Measuring duration

– typical 0.5 s

– maximal 4 s

Operating temperature +14° F to 104° F (-10° C to +40° C)

Storage temperature -4° F to 158° F (-20° C to +70° C)

Relative air humidity, max. 90 %

Technical Data

The numbering of the product features shown refers to the

illustration of the measuring tool on the graphic page.

The measuring tool is intended for measuring distances, lengths,

heights and clearances. The measuring tool is suitable for

measuring only indoors.

Intended Use

-10-

Preparation

Inserting/Replacing the Batteries

AAA Alkaline batteries are recommended for the measuring tool.

To open the battery lid 3, press the latch 4in the direction of

the arrow and remove the battery lid. Insert the batteries. When

inserting, pay attention to the correct polarity according to the

representation on the inside of the battery compartment.

When the battery symbol appears for the first time on the

display, measurements are still possible for approx. 15 minutes.

When the battery symbol flashes, the batteries must be

replaced; measurements are no longer possible.

Always replace all batteries at the same time. Only use

batteries from one brand and with the identical capacity.

Remove the batteries from the tool when not using it for

extended periods. When storing for extended periods, the

batteries can corrode and discharge themselves.

Laser class 2

Laser type 635 nm, <1mW

Laser beam diameter 77° F (at 25 °C)

and at 30 ft (10 m) distance, approx. 3/8 in (9 mm)

and at 50 ft (15 m) distance, approx. 1/2 in (13.5 mm)

Batteries 2 x 1.5V (AAA)

Battery service life in measuring operation, approx. 5 h

Weight 0.2 lb (0.1 kg)

Dimensions 4 x 1.4 x 0.9 in (100 x 36 x 23 mm)

A) The working range increases depending on how well the laser light is reflected from

the surface of the target (scattered, not reflective) and with increased brightness of

the laser point to the ambient light intensity (interior spaces, twilight). In unfavorable

conditions, e.g., with extreme interior illumination or a badly reflecting surface, the

measuring range may be limited.

B) In unfavorable conditions, e.g., with extreme interior illumination, badly reflecting

surface or the room temperature deviating heavily from 77°F (25°C), the maximum

deviation can be up to ±7 mm per 15 m. In favorable conditions, a deviation influence of

±0.05 mm/m must be taken into account.

The measuring tool can be clearly identified with the serial number 5on the type plate.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Bosch Instrument de mesure

Bosch

Bosch GLM 50 Professional Manuel utilisateur

Bosch

Bosch GMS 100 M Manuel utilisateur

Bosch

Bosch GLL 3 X Professional Manuel utilisateur

Bosch

Bosch GTL 3 Professional Manuel utilisateur

Bosch

Bosch BEA 055 Manuel utilisateur

Bosch

Bosch GLM 50 C Professional Instructions de montage

Bosch

Bosch Divar Instructions d'utilisation d'origine

Bosch

Bosch GRL 250 HV Manuel utilisateur

Bosch

Bosch UniversalDistance 40C Manuel utilisateur

Bosch

Bosch GAM220MF Professional Manuel utilisateur

Bosch

Bosch GLM165-22 Instructions de montage

Bosch

Bosch PLR30C Manuel utilisateur

Bosch

Bosch BL 40 VHR PROFESSIONAL Manuel utilisateur

Bosch

Bosch BEA 070 Manuel utilisateur

Bosch

Bosch CH-48027 Manuel utilisateur

Bosch

Bosch GLM 20 Manuel utilisateur

Bosch

Bosch ISC-MCLS3-S Manuel utilisateur

Bosch

Bosch Professional GLM 50-27 CG Manuel utilisateur

Bosch

Bosch LR 1 Professional Manuel utilisateur

Bosch

Bosch GLM165-40 Instructions de montage

Bosch

Bosch GLR225 Instructions de montage

Bosch

Bosch GLM Professional 100-25 C Manuel utilisateur

Bosch

Bosch 0 603 663 B03 Manuel utilisateur

Bosch

Bosch PLR 30 C Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur