Bluebird CT281 Manuel utilisateur
www.mypidion.com
User's Manual
∙Please read the following warnings before using the product.
∙Shapes and colors of the images shown in this manual may differ from the actual products.
∙Contents of the manuals may differ based on the software version of products or conditions of the wireless provider.
Counter Top Payment Terminal
CT281
2
• This user manual is protected by copyright.
• This user manual has been created by the Bluebird Inc. We have done our best not to
create typos, editing errors, and leaving out any information. Please understand if there
are any inconveniences.
• This product’s program is legally protected. Illegal copying, transmitting, or erasing of
the program is prohibited.
• This product’s partial functions might have problems from the environment, user
program, and other machines.
• This radio equipment will not be able to use related to the safety of life because there is
possibility for radio interference.
REGISTERED TRADEMARK
User’s guidance
※Please read warnings and cautious before use.
Device type User’s guidance
Class B Device
(Household Infor-
mation and
Communication
Device)
This device has qualified the electromagnetic wave suitable
registration and can be
used as a household device at a residential area as well as any
other areas.
Type registration This wireless device may cause propagation interference, and
so, it cannot be used for life-saving services.
BLUEBIRD is an emerging global brand, striving to lead the market
in performance and mobility. Their products represent reliability,
innovation, and innovative technology. Pidion is a registered
trademark from the global brand of Bluebird Inc. and is copyright
protected.
2
3
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following
two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may
cause undesirable operation.
- Manufacturer : PHIHONG (Switching Power Supply)
- Model : PSAC30U-090
- Input : 100-240 V~, 50~60Hz, 0.8A
- Output : 9V 3.0A
FCC (Federal Communications Commission)
This device complies with part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
The antenna must be installed such that 0 cm is maintained between the antenna and
users, and the transmitter module may not be co-located with any other transmitter or
antenna.
End users cannot modify this transmitter device. Any Unauthorized modi cation could
void the user`s authority to operate this device.
CE
Hereby, Bluebird Inc. declares that this CT281 is in compliance with the essential
requirements and other relevant provisions of directive 1999/5/EC.
Use only power supplies listed in the user manual.
Adaptor Info
4
Contents
Notice Before Using Device .................................... 5
Precautions Before Using Battery ............................. 6
About the product .............................................. 7
1. Checking components .......................................... 7
2. Checking names of parts ........................................ 8
3. Buttons ......................................................... 9
4. Connection Ports ................................................ 10
5. Establish Telephone Line Connections ........................... 11
Changing the printing paper .................................. 11
1. Opening the Printer Cover ...................................... 11
2. Closing Paper Roll Cover ........................................ 12
3. Direction for Receipt Cut ........................................ 12
Paying with card ................................................ 13
1. Paying with MSR ................................................ 13
2. Paying with IC Card ............................................. 13
Learning Basics ................................................. 14
1. Insert / Remove the battery ..................................... 14
1-1. Insert the battery ........................................... 14
1-2 Removing the battery ....................................... 14
2. Insert / Remove the USIM card .................................. 15
2-1. Insert the USIM card ........................................ 15
2-2. Removing the USIM card .................................... 15
3. Insert / Remove the microSD card ............................... 16
3-1. Insert the microSD card ..................................... 16
3-2. Removing microSD card .................................... 17
4. To Connect the Terminal Power .................................. 18
Device Specifications ........................................... 19
Q & A ............................................................. 20
Service Center ................................................... 21
Warranty Certificate ............................................ 23
4 5
Notice Before Using Device
• This device is qualied for the standard of the safety of human body against
electromagnetic wave. For your own safety, please use certied devices provided by
headquarter.
If not the case, we cannot guarantee your safety.
• Do not press power button on the device if the device is wet or do not touch adapter or
power cord with wet hands. There is risk of electric shock.
• Do not remodel, take apart, or repair the device. Please refer to your customer service
center.
If not the case, you will not be able to get your free repair service.
• Please follow instructions when using the battery.
• Do not use your device at an explosive danger zone.
• In case your device is wet, do not put your device in heaters, microwaves, or etc to
dry- there is a risk of explosion or it can be the cause of malfunction.
(Please note there is a label in the device that changes color when it gets wet. In this
case you will not be able to get your free repair service.)
• Do not use your device when boarding a plane or inside of hospitals.
• Please backup the data and information from your device.
During the repair or upgrade, there is a slight possibility of your data being erased.
(Ring tones, text/voice message, characters will be reset.)
• Please refrain from using your device while driving. If you are in an unavoidable
situation, stop your vehicle or use your hand free kit.
• Do not use in places of high temperature and high humidity. The following can be the
causes of malfunction: getting wet from the rain, spilling drinks, and taking it in with you
at the sauna (high temp.)
In these cases, you cannot receive your free repair service.
• Do not place credit cards, phone cards, bankbook, and tickets next to the device.
The magnetic forces of the device can damage the information of listed item.
• Please avoid impacts or vibrations. When the device is not in use, unplug the power
cord and place it at a safe place where it won’t drop.
• Do not place your device at a dusty place. Keep your power cord away from any heating
devices. Unplug the power cord when cleaning. If there are any dusts or residue clean
the power cords pins thoroughly.
• When a battery is not in use for a long time, please charge and store it at room
temperature. Even for fully charged battery, the lifetime can be decreased because of its
own properties of voltage decrease.
• Do not paint your device. It can damage your screen or your device’s exterior.
Also, the paint can peel o and it triggers allergies. If there is allergic reaction, please nd
medical advice.
WARNING
This information is for your own safety. Please observe the following precautions.
6
Precautions Before Using Battery
• If the battery is taken apart by impact, applied heat, submersion, or hole-drilling, there is
a risk of a dangerous explosion. Please keep away from children and animals.
• Leaving the battery in the vehicles under direct sunlight or any enclosed space with hot
temperature can deform or break down the battery.
• Please do not make any improper contact on battery contact pin with necklaces, coins
or any electric conductors. Do not give any impact by sharp object. There is a risk of
explosion.
• Please use only the designated battery for the device.
If the original battery is not used, the life of the device may decrease and there is a risk of
explosion. (In this case you cannot receive the free repair service)
• When charging the battery, you must use the supplied standard power adapter.
If the original adapter is not used, the battery life may decrease and may explode.
(In this case you cannot receive the free repair service)
WARNING
These are safety precautions in order to prevent a dangerous accident.
Please use the battery correctly and carefully observe the instructions.
6
7
1
2
34
About the product
1. Checking components
The images in this User’s Manual may not re ect the color and shape of the
actual product.
Please contact the Customer Care Center if you wish to purchase any additional
or optional products.
CT281 Main Body
Power Adapter
Power Cable
PSTN Cable
Battery
8
2. Checking names of parts
1
2
34
1
2
34
1 2 3 4
Screen
MSR Slot
Battery Cover
Cable Cover
Enter Button
Cancel Button
Cable Slot
Printer
IC Card Slot
Clear Button
Power LED
Conn. LED
8
9
3. Buttons
The front panel includes the following features:
•
A terminal display, Backlight LCD screen.
•
Five types of keys:
1. 12-key, numeric keypad.
2. Four ATM-style function keys, labeled F1 to
F4, below the LCD screen.
3. Four unlabeled, programmable function
keys above the keypad.
4. Three color-coded function keys
below the keypad (from left to right:
CANCEL,BACKSPACE/CLEAR, ENTER).
•
Built-in MSR is located at the right side of the
device. There is the icon shows you the proper
way to swipe the card. It will be swiped down.
The magnetic stripe of the card needs to be
facing to the device while swiping.
•
An internal thermal printer.
•
Built-in IC card reader is located at the bottom
of the terminal. There is the icon shows you
the proper way to insert IC card.
1 2 3 4
10
4. Connection Ports
There are connection ports available on back side of the terminal. The ports are
covered by protect cover.
Various ports are provided in order to connect CT281 with any external
peripheral devices, data communication or power supply.
Shows the connection ports for CT281 terminal.
USB HOST
ETHERNET RS232 1/2 LINE
USB
DEVICE
POWER
9V
USB HOST
ETHERNET RS232 1/2 LINE
USB
DEVICE
POWER
9V
USB HOST
ETHERNET RS232 1/2 LINE
USB
DEVICE
POWER
9V
USB HOST
ETHERNET RS232 1/2 LINE
USB
DEVICE
POWER
9V
Table des matières
Autres manuels Bluebird Terminal de paiement
Bluebird
Bluebird SP500 Manuel utilisateur
Bluebird
Bluebird CT280 Manuel utilisateur
Bluebird
Bluebird MT281 Manuel utilisateur
Bluebird
Bluebird Pidion MT760 Manuel utilisateur
Bluebird
Bluebird MT280 Manuel utilisateur
Bluebird
Bluebird Pidion MT760 Manuel utilisateur
Bluebird
Bluebird MT3 Series Manuel utilisateur
Manuels Terminal de paiement populaires d'autres marques
Ingenico
Ingenico iWL250B Manuel utilisateur
Optimum
Optimum M4230 Manuel utilisateur
Triton
Triton RL5000 Manuel utilisateur
Ingenico group
Ingenico group Lane/8000 Manuel utilisateur
Gilbarco
Gilbarco FlexPay IV CRIND Manuel d'installation et d'exploitation
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Manuel utilisateur
