Black Box EMS100G32-R2 Manuel utilisateur

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

USER MANUAL

EMERALD

100-GIGABIT

ETHERNET NETWORK

SWITCH, 32-PORT

EMS100G32-R2

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1.877.877.2269 BLACKBOX.COM

TABLE OF CONTENTS

E MS100G32-R2 SWIT CH 5

INTRODUCTION 5

FEATURES 6

PHYSICAL DIMENSIONS 7

LED DISPLAY 7

LED BEHAVIOR 7

PREREQUISITES 11

MS100G32-R2 SWITCH CONFIGURATIONS 12

LUGGAGE TAG 12

SITE PREPARATIONS 13

SITE SELECTION 13

CABINET PLACEMENT 13

RACK MOUNTING 14

SWITCH GROUND 14

FANS AND AIRFLOW 14

FAN COMBINATIONS 14

POWER 15

STORING COMPONENTS 15

SWITC H I NSTALL ATIO N 16

EMS100G32-R2 NEBS COMPLIANCE 16

IMPORTANT INFORMATION 16

GROUND CABLE 17

RACK OR CABINET HARDWARE INSTALLATION 18

RACK MOUNT SAFETY CONSIDERATIONS 18

ONE U READYRAILS INSTALLATION 19

1U TOOL-LESS MOUNT INSTALLATION 20

TWO-POST FLUSH-MOUNT INSTALLATION 21

TWO-POST CENTER-MOUNT INSTALLATION 22

FOUR-POST THREADED INSTALLATION 23

1.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

SWITCH INSTALLATION 24

1U FRONT-RACK INSTALLATION 24

DC POWER CONNECTIONS 26

OPTICS INSTALL ATION 27

OPTICS REMOVAL 27

SWITCH START UP 28

START UP SEQUENCE 28

AFTER SWITCH PLACEMENT 28

SWITCH REPLACEMENT 29

POWER SUPPLIES 30

COMPONENTS 30

PSU LEDS 31

AC OR DC POWER SUPPLY INSTALLATION 31

AC OR DC POWER SUPPLY REPLACEMENT 32

POWER CABLE CLIP INSTALLATION 33

FANS 34

COMPONENTS 34

FAN LEDS 34

FAN MODULE INSTALLATION 35

FAN MODULE REPLACEMENT 35

MANAGEMENT PORTS 36

RJ-45 CONSOLE PORT ACCESS 36

MICROUSB-B CONSOLE PORT ACCESS 37

USB STORAGE MOUNT 38

BEFORE YOU INSTALL AN OS 38

GRUB BOOTLOADER EXAMPLE 39

ONIE EXAMPLE 39

CHECK YOUR SWITCH 40

ONIE SERVICE DISCOVERY 40

SPECIFICATIONS 42

41.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

CHASSIS PHYSICAL DESIGN 42

IEEE STANDARDS 44

ELECTROMAGNETIC COMPATIBILITY 44

PRODUCT RECYCLING AND DISPOSAL 45

APPENDIX A: REGULATORY INFORMATION 46

A.1 FCC STATEMENT 46

A.2 CE STATEMENT 46

A.3 ROHS 46

A.4 NOM STATEMENT 47

APPENDIX B: DISCLAIMER/TRADEMARKS 48

B.1 DISCLAIMER 48

B.2 TRADEMARKS USED IN THIS MANUAL 48

1.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

ABOUT THIS GUIDE

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk

mounting your switch, inserting modules, and connecting to a power source.

CAUTION

To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.

NOTE:

Only trained and qualified personnel can install this equipment. Read this guide before you install and power up

this equipment. This equipment contains two power cords. Disconnect both power cords before servicing.

This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

NOTE:

When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.

REGULATORY

EMS100G32-R2 is represented by the regulatory model E21W and the regulatory type E21W005.

61.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

EMS100G32-R2 SWITCH

INTRODUCTION

The EMS100G32-R2 switch is a full-featured, fixed form-factor top-of-rack (ToR) compact 10/25/40/50/100/200GbE

switch for data center networks with small form-factor pluggable plus (SFP+), small form-factor pluggable 28 (SFP28),

quad small form-factor pluggable 28 (QSFP28), and quad small form-factor pluggable double density (QSFP-DD)

ports. In addition, the switch is a 10/25/40/50/100/200GbE switch with 10/25GbE links for server connections and

40/50/100GbE links for clustering—virtual link trunking (VLT) and stacking—and uplinks to aggregation and core

switches. The switch includes two hot-swappable AC or DC power supply units (PSUs) and four hot-swappable fan

units.

EMS100G32-R2 is a one-rack unit that includes (32) 100GbE QSFP28 ports and (2) 10GbE SFP+ ports.

It supports the following configurations:

96 x 10GbE + 8 x 100GbE

96 x 25GbE + 8 x 100GbE

128 x 10GbE

128 x 25GbE

64 x 50GbE

32 x 40GbE

32 x 100GbE

The EMS100G32-R2 switch I/O-side view:

1. Stack ID 2. (32) 100GbE QSFP28 ports

3. (2) 10GbE SFP+ ports 4. LED Status Icons

1.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

The EMS100G32-R2 switch has one RJ-45 serial console port, one Micro-USB Type A console port, one 10/100/1000

Base-T Ethernet management port, and one USB Type A port for the external storage. Management ports are

located on the PSU-side of the switch.

The EMS100G32-R2 switch PSU-side view:

1. AC PSU1 2. Fan modules

3. RJ-45 Ethernet port 4. USB Type A

5. Luggage tag 6. Fan modules

7. AC PSU2 8. Reset button

9. MicroUSB-B console port 10. RJ-45 console port

FEATURES

The EMS100G32-R2 switch offers the following features:

(32) 100GbE QSFP28 ports and (2) 10GbE SFP+ ports

One MicroUSB-B console port

One RJ-45 console port

One USB Type A port for more file storage

Four-core Intel Denverton central processing unit (CPU) system with 16 GB SDRAM and 64 GB SSD.

(1) 10/100/1000BaseT Ethernet management port

Temperature monitoring

Software-readable thermal monitor

Real time clock (RTC) support

(2) hot-pluggable redundant PSUs

(4) hot-pluggable replaceable fan modules

Power management monitoring

Mounting holes to accommodate two-hole ground lug

Switch (Standard one rack unit)

EMS100G32-R2 SWITCH

81.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

PHYSICAL DIMENSIONS

The EMS100G32-R2 switch has the following physical dimensions:

17.1 x 18.1 x 1.72 inches (434 x 460 x 43.6 mm) (W x D x H)

LED DISPLAY

The EMS100G32-R2 switch includes LED displays on the I/O side of the switch. This section describes open

networking installation environment (ONIE) LED behaviors. Some LED behaviors may change after you install your

software.

LED BEHAVIOR

The EMS100G32-R2 switch LED behavior is seen during ONIE operations.

Switch LEDs:

1. Stack ID LED 2. Port Activity LEDs

3. Port Activity LED 4. Master LED

5. System LED 6. Locator LED

7. Fan LED 8. Power LED

9. RJ-45 Ethernet Port LED

EMS100G32-R2 SWITCH

1.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

TABLE-1 EMS100G32-R2 SWITCH LED BEHAVIOR

LED DESCRIPTION

System Status/Health LED

Solid green—Normal operation

Flashing green—Booting

Solid yellow—Critical system error

Flashing yellow—Noncritical system error, fan failure, or power supply failure

Power LED

Off—No power

Solid Green—Normal operation

Solid yellow—POST is in process

Flashing yellow—Power supply failed

Master LED Off—Switch is in Stacking Slave mode

Solid green—Switch is in Stacking Master or Standalone mode

FAN LED

Off—No power

Solid green—Normal operation; fan powered and running at the expected RPM

Flashing yellow—Fan fault—including incompatible airflow direction when you insert the PSU

or fan trays with differing airflows

PSU LED

Off—No power

Solid green—Normal operation

Flashing yellow—PSU warning event; power continues to operate

Flashing green—4Hz with five times on and off: Mismatch

Flashing green—Firmware update

LOCATOR LED/System Beacon Off—Locator function disabled

Flashing blue—Locator function enabled

7-Segment LED for stacking Off—No power

Solid green—Hex digit representing the stack unit ID

EMS100G32-R2 SWITCH

10 1.877.877.2269 BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

TABLE-2 SYSTEM MANAGEMENT ETHERNET PORT LEDS

LED DESCRIPTION

Link LED

Off—No link

Solid green—Link operating at a maximum speed, autonegotiated/forced to

1000MBase-T mode

Solid yellow—Link operating at a lower speed, autonegotiated/forced

or 10/100MBase-T mode

Activity LED Off—No activity

Flashing green—Port activity

TABLE-3 SFP28 PORT LEDS

LED DESCRIPTION

Link LED

Off—No link

Solid green—Link operating at maximum speed, 25G

Solid yellow—Link operating at a lower speed, 10G or 1G

Flashing green, ~30ms—Port activity operating at maximum speed, 25G port

Flashing yellow, ~30ms—Port activity operating at lower speed, 10G or 1G port

Flashing yellow, 1 second on/off—port beacon

Activity LED

Off—No activity

Flashing green—port activity at maximum speed

Flashing yellow—port activity at lower speed

EMS100G32-R2 SWITCH

Table des matières

Autres manuels Black Box Changer

Black Box

Black Box LGS103AE Manuel utilisateur

Black Box

Black Box SM025A-FFF Manuel utilisateur

Black Box

Black Box ServSwitch Wizard SW641A Manuel utilisateur

Black Box

Black Box SI1P-SH-DVI-UCAC Manuel utilisateur

Black Box

Black Box AC447A Manuel utilisateur

Black Box

Black Box KV9632A Manuel utilisateur

Black Box

Black Box ServSwitch DT Pro II KV7020A Manuel utilisateur

Black Box

Black Box KVS4-1004KX Manuel utilisateur

Black Box

Black Box LE1401A Manuel utilisateur

Black Box

Black Box ServSelect III KV21008A Manuel utilisateur

Black Box

Black Box KV1044A-R2 Manuel utilisateur

Black Box

Black Box LGB1108A Manuel utilisateur

Black Box

Black Box LBH100A-SC Manuel utilisateur

Black Box

Black Box ServSwitch KV0202A Manuel utilisateur

Black Box

Black Box MT760A Manuel utilisateur

Black Box

Black Box SW1023A Manuel utilisateur

Black Box

Black Box ACL201A Manuel utilisateur

Black Box

Black Box ServSwitch Summit KV1500A Manuel utilisateur

Black Box

Black Box ServSwitch Ultra KV5002MA-R2 Manuel utilisateur

Black Box

Black Box KVS4-1002D Manuel utilisateur

Black Box

Black Box SW1033A Manuel utilisateur

Black Box

Black Box ServSwitch DTX5000 Manuel utilisateur

Black Box

Black Box LB005A Manuel utilisateur

Black Box

Black Box ServSwitch II ACS250A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur