Black Box SWI030A Manuel utilisateur

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

AUGUST 2001

SWI030A

SWI030AE

SWI031A

SWI031AE

SWI032A

Pow-R-Switches 1M, 1S, and Rack Tray

Pow-R-Switch IS

AC ON

LINK

RDY

Pow-R-Switch IM

AC ON

LINK

RDY

FEDERAL COMMUNICATIONS COMMISSION

AND

INDUSTRY CANADA

RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio frequency

energy and if not installed and used properly, that is, in strict

accordance with the manufacturer’s instructions, may cause

interference to radio communication. It has been tested and found

to comply with the limits for a Class A computing device in

accordance with the specifications in Subpart J of Part 15 of FCC

rules, which are designed to provide reasonable protection against

such interference when the equipment is operated in a commercial

environment. Operation of this equipment in a residential area is

likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference

Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de

classe A prescrites dans le Règlement sur le brouillage radioélectrique

publié par Industrie Canada.

TRADEMARKS USED IN THIS MANUAL

AT and IBM are registered trademarks, and PC/XT is a trademark,

of International Business Machines Corporation.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

FCC AND IC STATEMENTS, TRADEMARKS

POW-R-SWITCHES 1M, 1S

NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones

de operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como

sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más

allá a lo descrito en las instrucciones de operación. Todo otro servicio

deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama,

sofá, alfombra o superficie similar puede bloquea la ventilación, no se

debe colocar en libreros o gabinetes que impidan el flujo de aire por los

orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de

calor como radiadores, registros de calor, estufas u otros aparatos

(incluyendo amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo

del tipo descrito en el instructivo de operación, o como se indique en

el aparato.

NOM STATEMENT

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que

no sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo

no sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del

aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio

en su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

POW-R-SWITCHES 1M, 1S

Contents

Chapter Page

1. Specifications ............................................................................................. 5

1.1 Specs for Pow-R-Switch (SWI030, SWI031) Units ............................. 5

1.2 Specs for Rack Tray (SWI032) ........................................................... 7

2. Introduction ............................................................................................... 8

2.1 General Overview ................................................................................ 8

2.2 Features ............................................................................................... 8

2.3 Applications ......................................................................................... 9

2.4 The Pow-R-Switches 1M and 1S Illustrated ..................................... 10

3. Installation ................................................................................................ 12

3.1 Selecting the Address ........................................................................ 12

3.2 Setting the Configuration Switch ..................................................... 13

3.3 Linking the Modules ......................................................................... 14

3.4 Making the Control-Port Connection

(Pow-R-Switch 1M Only) ................................................................ 15

3.5 Making the Power Connections ....................................................... 16

3.6 Testing for Proper Installation ......................................................... 16

4. Operation ................................................................................................. 18

5. Troubleshooting ...................................................................................... 21

5.1 Calling Your Supplier ....................................................................... 21

5.2 Shipping and Packaging ................................................................... 21

Appendix A: Accessories ................................................................................ 22

A.1 The Rack Tray (SWI032) .................................................................. 22

A.2 Modular Adapters ............................................................................. 23

Appendix B: Pinouts ....................................................................................... 24

CHAPTER 1: Specifications

1.1 Specs for Pow-R-Switch (SWI030, SWI031) Units:

Compliance — FCC Class A, IC Class/classe A

Interfaces — All models: Serial EIA RS-485;

Pow-R-Switch 1M (SWI030) models only: Serial EIA

RS-232 (DTE), IBM AT implementation

Protocol — Asynchronous

Code Set — ASCII

Data Format — 8 data bits, no parity, 1 stop bit (fixed)

Flow Control — None

Data Rate — 2400 or 9600 bps, user-selectable

Maximum

Distance — RS-232 (Control) side: 50 ft. (15.2 m);

RS-485 (Link) side: 2000 ft. (609.6 m) to farthest

Pow-R-Switch 1S (SWI031) module

User Controls — Keyboard commands;

(2) Rear mounted: (1) Rotary dial for addressing and

(1) 4-position DIP switch for data rate, toggle delay,

and default outlet state

Indicators — (3) Front-mounted LEDs: AC ON, LINK, and RDY

(ready)

1. Specifications

POW-R-SWITCHES 1M, 1S

Connectors — All rear-mounted:

Data:

All models: (2) RJ-11 female (for RS-485);

Pow-R-Switch 1M (SWI030) units only: (1) DB9

male (for RS-232);

AC Power:

120-VAC models (SWI030A, SWI031A) only:

Input: (1) North American standard NEMA

5-15P plug (on power cord);

Output: (1) North American standard NEMA

5-15R outlet;

230-VAC models (SWI030AE, SWI031AE) only:

Input: (1) International standard IEC 320 male

inlet;

Output: (1) International standard IEC 320

female outlet

Leads/Signals

Supported — 1, 2, 3, 4, 5, and 7 (RLSD [DCD], TD, RD, DTR,

SGND, and RTS respectively); see Appendix A

Power — 120-VAC models (SWI030A, SWI031A):

Input and Output: 120 VAC, 60 Hz, up to

10 amps;

Consumption (Standby, No Load): 0.5 amps;

230-VAC models (SWI030AE, SWI031AE):

Input and Output: 230 VAC , 50 Hz, up to

5 amps

Consumption (Standby, No Load): 0.25 amps

Temperature

Tolerance — 32 to 122˚F (0 to 50˚C)

Humidity

Tolerance — 20 to 80% noncondensing

Enclosure — Steel

CHAPTER 1: Specifications

Size — 1.7"H x 5.5"W x 5"D (4.2 x 14 x 12.7 cm)

Weight — 2 lb. (0.9 kg)

1.2 Specs for Rack Tray (SWI032)

Configuration — Holds three Pow-R-Switch modules side by side

Material — Steel

Size — With Pow-R-Switch modules installed:

1.75" (1U) H x 19"W x 5.5"D (4.4 x 48.3 x 14 cm)

Weight — 15 lb. (6.8 kg)

POW-R-SWITCHES 1M, 1S

2.1 General Overview

Network devices sometimes lock up, so that communicating with them is

impossible. On command, a Pow-R-Switch 1M can switch AC power at up

to ten individual Pow-R-Switch 1S modules located throughout your facility.

This serves to boot, shut down, or reboot the devices plugged into the

Pow-R-Switches 1S.

Each addressable Pow-R-Switch 1S module can be switched ON, switched

OFF, or toggled OFF and then back ON. You can link individual modules

together across a total end-to-end RS-485 distance of up to 2,000 feet (609.6

m) using 4-wire RJ-11 cable. One Pow-R-Switch 1M module serves as the

control unit (address 0) while as many as nine Pow-R-Switches 1S (addresses 1

through 9) serve as satellites.

The Pow-R-Switch 1M’s RS-232 Control Port, which can be connected to a

modem, a PC, or one of our Port Manager Switches (product codes SW545A

and SW546A), accepts command strings of ASCII characters. Use these

command strings to operate the desired Pow-R-Switch 1S module, or send

a status command to cause the master unit to display the ON/OFF condition

of all modules on the link.

2.2 Features

•

Through the Pow-R-Switch 1M’s RS-232 Control Port (DB25 connector),

control your Pow-R-Switch system by modem or directly from a PC.

• Interlink and control up to ten Pow-R-Switches through their RS-485

Link Ports (RJ-11 connectors).

• Build a chain of Pow-R-Switches up to 2000 ft. (609.6 m) long.

• Switch up to 10 amps of AC power on each Pow-R-Switch (5 amps for

230V models).

• Send the units ON, OFF, or Toggle commands.

• Choose the data rate and reboot-cycle duration you want.

2. Introduction

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Changer

Black Box

Black Box LIG1014A Manuel utilisateur

Black Box

Black Box SW035A Manuel utilisateur

Black Box

Black Box LGB524A Manuel utilisateur

Black Box

Black Box ServSwitch Octet KV1701 Manuel utilisateur

Black Box

Black Box CAT5 ClassWork Plus Multiloop Manuel utilisateur

Black Box

Black Box SWI069A Manuel utilisateur

Black Box

Black Box AVSW-DP2X1 Manuel utilisateur

Black Box

Black Box ServSwitch Manuel utilisateur

Black Box

Black Box ServSwitch Uno USB Guide de démarrage rapide

Black Box

Black Box LGB1126A-R2 Manuel utilisateur

Black Box

Black Box IC562A Manuel utilisateur

Black Box

Black Box LGB1005A-R2 Manuel utilisateur

Black Box

Black Box LGB616A Manuel utilisateur

Black Box

Black Box ACX576 Manuel utilisateur

Black Box

Black Box LB9217A-R2 Manuel utilisateur

Black Box

Black Box ClassWork Junior Manuel utilisateur

Black Box

Black Box LB9306A Manuel utilisateur

Black Box

Black Box LB8405A-R2 Manuel utilisateur

Black Box

Black Box LGB1108A Manuel utilisateur

Black Box

Black Box ServSwitch DTX5000 Manuel utilisateur

Black Box

Black Box LPB200A Manuel utilisateur

Black Box

Black Box SW625A-R3 Manuel utilisateur

Black Box

Black Box KVT1IP1UV Manuel utilisateur

Black Box

Black Box LB005A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur