Black Box ACS4422A-R2 Manuel utilisateur

ACS4422A-R2, ACS4422A-R2-MM

ACS4422A-R2-SM, ACS4442A-R2

ACS4442A-R2-MM, ACS4442A-R2-SM

ACS4481A-R2-SM, ACS4482A-R2-SM

DVI-D-CATx/Fiber KVM-Extender

Quad-Head

Manual

http://www.blackbox.com

DVI-D CATX/FIBER KVM-EXTENDER

Welcome to the DVI-D CATx/Fiber KVM-

Extender Family!

Thank you for purchasing a DVI-D CATx/Fiber KVM-Extender! We appreciate your

business, and we think you’ll appreciate the many ways that your enhanced RGB Graphic

system will save you money, time, and effort.

That’s because our DVI-D CATx/Fiber KVM-Extender is all about breaking away from the

traditional model of attaching a new display to DVI graphic source. Using the DVI-D

CATx/Fiber KVM-Extender, you can remotely locate monitor, keyboard and mouse up to

140m (@ CATx) away from your CPU. Singlemode fibers allow up to 10km!

Wherever long distances are required, e.g. airports, industrial plants, call- centres or in

distributed computer centres, the DVI-D CATx/Fiber KVM-Extender is the best way, to solve

all problems in remotely locating your console. 2 families with 4 different types are available:

Quad-Head devices for USB HID or USB 2.0 transparent – CATx, Multimode, Singlemode

and CWDM.

This manual will tell you all about your new DVI-D CATx/Fiber KVM-Extender, including

how to install, operate, and troubleshoot it. For an introduction to the Extender, see Chapter

2. The Extender product codes covered in this manual are:

ACS4422A-R2: KVM-Extender Quad-Head DVI-D, USB-HID, CATx

ACS4422A-R2-MM: KVM-Extender Quad-Head DVI-D, USB-HID, Multimode

ACS4422A-R2-SM: KVM-Extender Quad-Head DVI-D, USB-HID, Singlemode

ACS4442A-R2: KVM-Extender Quad-Head DVI-D, USB-2.0, CATx

ACS4442A-R2-MM: KVM-Extender Quad-Head DVI-D, USB-2.0, Multimode

ACS4442A-R2-SM: KVM-Extender Quad-Head DVI-D, USB-2.0, Singlemode

ACS4481A-R2-SM: KVM-Extender Quad-Head DVI-D, USB-HID,

Singlemode- CWDM

ACS4482A-R2-SM: KVM-Extender Quad-Head DVI-D, USB-2.0,

Singlemode- CWDM

DVI-D CATX/FIBER KVM-EXTENDER

Copyrights and Trademarks

the prior written consent of the manufacturer.

Information in this document is subject to change without notice and the manufacturer shall

not be liable for any direct, indirect, special, incidental or consequential damages in

connection with the use of this material.

All trademark and trade names mentioned in this document are acknowledged to be the

property of their respective owners.

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer

assumes no responsibility for errors or omissions. Neither does the manufacturer assume any

liability for damages resulting from the use of the information contained herein. The

manufacturer reserves the right to change the specifications, functions, or circuitry of the

product without notice.

The manufacturer cannot accept liability for damage due to misuse of the product or due to

any other circumstances outside the manufacturer’s control (whether environmental or

installation related). The manufacturer shall not be responsible for any loss, damage, or injury

arising directly, indirectly, or consequently from the use of this product.

Cautions and Notes

The following symbols are used in this guide:

CAUTION. This indicates an important operating instruction

that should be followed to avoid any potential damage to

hardware or property, loss of data, or personal injury.

NOTE. This indicates important information to help you make the best use of

this product.

DVI-D CATX/FIBER KVM-EXTENDER

CONFORMITY

The products, mentioned in this manual are released according to the following standards:

WARNING: This equipment has been found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

DVI-D CATX/FIBER KVM-EXTENDER

Safety Precautions and Installation Guidelines

To ensure reliable and safe long-term operation, please note the following installation

guidelines:

•Do not use CATx-devices to link between buildings – please use fiber devices.

•Only use in dry, indoor environments.

•If the building has 3-phase AC power, try to ensure that equipment connected to the

Local and Remote units is on the same phase.

•Try not to route a CATx link cable alongside power cables.

•The Remote unit, Local unit and any power supplies can get warm. Do not locate them

in an enclosed space without any airflow.

•Do not place a power supply directly on top of a unit.

•Do not obstruct a unit’s ventilation existing holes.

To safeguard against personal injury and avoid possible

damage to equipment or property, please observe the

following:

•Only use power supplies originally supplied with the

product or manufacturer-approved replacements. Do not

attempt to dismantle or repair any power supply. Do not

use a power supply if it appears to be defective or has a

damaged case.

•Connect all power supplies to grounded outlets. In each

case, ensure that the ground connection is maintained

from the outlet socket through to the power supply’s AC

power input.

•Do not attempt to modify or repair this product, or make

a connection from the CATx link interface (RJ45) to any

other products, especially telecommunications or

network equipment.

CONTENTS

Contents

1. Quick Setup 8

2. Overview 9

2.1 Introduction 9

2.2 Glossary 9

2.3 Features 11

2.4 Product Range 12

2.5 Compatibility 13

2.6 How to Use This Guide 14

3. Installation 15

3.1 Package Contents 15

3.2 Interconnection Cable Requirements 17

3.3 System Setup 19

3.4 Diagnostic LEDs 25

4. Service Setup 27

4.1 Setup at the Local Unit 27

4.2 Setup at the Remote Unit 30

5. Troubleshooting 31

Appendix A: Example Applications 35

Appendix B: Rack Mount Options 37

Appendix C: Audio/Serial Support 38

Appendix D: Calling Technical Support 39

Appendix E: Specifications 41

Appendix F: Connectors 43

DVI-D CATX/FIBER KVM-EXTENDER

1. Quick Setup

This section briefly describes how to install your KVM extender system. Unless you are an

experienced user, we recommend that you follow the full procedures described in the rest of

this manual.

Install system

1. Connect Remote unit to KVM.

2. Connect Local unit to CPU or switch.

3. Connect Local and Remote units with matching interconnection cable

(CATx or Fiber).

4. Power up the system.

Done

YES

Link LED

illuminated?

YES

Check p.s.u.’s and connection

to power outlet

Power LED

illuminated?

Check the CATx or Fiber

cable, and its connectors

Check settings of graphic card

or boot CPU

Video OK

LED

illuminated?

YES

OVERVIEW

2. Overview

2.1 Introduction

A CATx/Fiber KVM Extender is mainly used, to extend the maximum distance between

a CPU and his Keyboard / Monitor / Mouse considerably. In addition they are beneficial

in installations in electromagnetic hazardous environments (EMI). Normal Keyboard-/

Monitor-/ Mouse extender cables (and Extender using traditional cables) cannot go so far

and EMI interferences may reduce the maximum distance and/or reliability. Using a

DVI-D CATx Extender system, these limitations are past. Retain your CPU in a secure

rack cabinet or data center while accessing from a 140m remotely located place.

A basic KVM extension system comprises a Local unit and a Remote unit. The Local unit

connects directly to the computer (or a KVM switch system) using the supplied cable(s). The

user console (keyboard, mouse and monitor) attaches to the Remote unit. The Remote and

Local units communicate video and data information along the interconnecting cables. Local

units offer dual access, allowing the connection of a second monitor close to the computer.

2.2 Glossary

The following terms are used in this guide:

CATx Any Category 5, 5e, 6 or higher cable, solid wires type AWG24.

Although flexible AWG27/7 cables can be used too, the lengths of

flexible cables count twice in the calculation of the total distance.

Fiber 9µ Singlemode or 50µ/62,5µ Multimode fiber cable.

KVM Keyboard, Video and Mouse.

Console Keyboard, Mouse and Monitor

Dual Access A system allowing connection of Local and Remote user consoles.

Single-Head An extender system that supports one monitor + Keyboard/Mouse

Quad-Head An extender system that supports four monitors + Keyboard/Mouse

DVI Digital Video standard, installed by Digital Display Working Group

(www.ddwg.org) R, G, B, CLOCK in a data stream with up to

3x 1,6 Gbit/sec. Signals are TMDS Level.

PSU The desktop power supply connected to the Local/Remote unit.

HID Human Interface Devices are units, which are used for human access

to the CPU. They are a USB-device class of its own (e.g. Memory

Devices etc.). Besides of keyboard and mouse also touchscreen, light

pen, fingerprint sensor, graphic tablets etc. are HID devices

DVI-D CATX/FIBER KVM-EXTENDER

DVI-D CATx – KVM Extender system (example)

CPU with DVI-D Quad-Head

Graphic card

DVI-D CATx KVM-

Extender system

Local Console

Remote Console

Optional additional

USB 2.0 devices

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Black Box Extenseur

Black Box

Black Box IC101A Manuel utilisateur

Black Box

Black Box ServSwitch II ACS250A Manuel utilisateur

Black Box

Black Box SERVSWITCH Series Manuel utilisateur

Black Box

Black Box ACU1500A Manuel utilisateur

Black Box

Black Box ACS1009A series Manuel utilisateur

Black Box

Black Box ACS4002A-R2 Manuel utilisateur

Black Box

Black Box ACX1MT Series Manuel utilisateur

Black Box

Black Box IC247A Manuel utilisateur

Black Box

Black Box IC443A Manuel utilisateur

Black Box

Black Box IC247A Manuel utilisateur

Black Box

Black Box 4KDPKVMXT-100M-R2 Manuel utilisateur

Black Box

Black Box IC406A Manuel utilisateur

Black Box

Black Box Extreme T LB323A Manuel utilisateur

Black Box

Black Box ServSwitch ACS253A-CT Manuel utilisateur

Black Box

Black Box UVX-DP-TP-100 Manuel utilisateur

Black Box

Black Box Wizard DVI SRX Manuel utilisateur

Black Box

Black Box ACU5600A-SM Manuel utilisateur

Black Box

Black Box AVU4001A Manuel utilisateur

Black Box

Black Box ACS335A Manuel utilisateur

Black Box

Black Box EMD100USB Manuel utilisateur

Black Box

Black Box LBLP01A-KIT Manuel utilisateur

Black Box

Black Box AC550A Manuel utilisateur

Black Box

Black Box EMD4000R Manuel utilisateur

Black Box

Black Box IC500A Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur