1 1 Warranty
GENERAL
6.009.98.5.10.02
Contact us or your local after--sales service, if
any information is not properly understood.
SEquipment should only be transported and
stored in its original packing.
SEquipment should not be started up before
the requirements of the Bizerba operating
conditions are met.
SEquipment causes vibrations during
operation, the supporting area should be
horizontal, level, stable and non--slippery.
Equipment should be arranged in such a
way as to facilitate operation, working
procedures and service.
SInitial installation, commissioning,
introduction, cleaning, maintenance and
servicing should only be carried out by the
relevant BIZERBA after--sales service or
by companies or personnel authorized by
BIZERBA.
SThe use of hardware and software which
may be necessary for a data dialog
between BIZERBA and non--BIZERBA
equipment is subject to written approval
from BIZERBA.
SEquipment should not be set into operation
before supervisory and operating
personnel have thoroughly read and
understood these operating instructions.
SOnly trained personnel should operate the
equipment. Training should be repeated.
SBIZERBA does not accept any liability for
damage arising as a result of installation by
anyone other than
BIZERBA--incorporated or designated
representatives, faulty electrical
connection by the user, improper
operation, inappropriate use, modification
of equipment in any way from its original
form, removal of guards, the use of spare
parts and accessories other than genuine
BIZERBA parts or accessories.
SThe user will be responsible for any
damage or injury arising as a result of
failure to observe the BIZERBA
instructions.
STherefore, it is strongly recommended to
use only genuine BIZERBA spare parts
and accessories.
SNormal wear and tear are not covered by
the guarantee.
To provide operational
assurance and to protect
personnel from possible
injuries, the requirements of
these instructions must be met
before the machine is set into
operation and during
operation
raphics appearing in these instructions may
differ slightly from the model supplied due to
country--specific regulations and further
product development. This does not affect the
contents of these operating instructions
4
