BIQU Magician Manuel utilisateur
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
Content
1. Unpacking……………………………………………………1
2. Component Description…………………………………….2
3. Hardware Installation…………………………………….....3
4. Software Application……………………………………......5
(1) Software Installation…………………………………….5
(2) Slicing Operation……………………………………......7
Appendix…………………………………..……..……..……8
5. Automatic Leveling……………………..……..……..…….16
6. Platform Handling……………………..……..……..……..19
7. First Printing……………………..……..……..……...........20
8. Replacing Filament……………………..……..……..……22
9. Problem Analysis(FAQ)……………………..……..……...24
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
1
1. Unpacking
When receiving the machine, please check the randomly
presented items for better printing experience.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
2
2. Component Description
User can get the relevant accessories informations
from the below photo to know the basic components of 3D
Printer.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
3
3. Hardware Installation
The printer is strictly tested before delivery for
maintaining the regular printing operation. You can enjoy
3D printing for the rst time after installing the lament and
complete Auto leveling.
① Please x the lament holder at the top of printer.
② Please put the lament directly on the holder.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
4
③ After that, insert the lament into the extruder.
④ Finally, insert the power plug and press the power
switch.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
5
4. Software Application
(1) Software Installation
First locate the slicing software, the le is stored in the
randomly presented SD card, the specific storage path is
shown as below: Magician Data\English\Slicing software-
Cura. Then, double click the le, go on by default and select
installation.
After the installation, open Cura and a window will pop
up. Just click "Add Printer" at the lower right corner and the
machine settings of BIQU-Magician will be completed.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
6
The above figure is the default printing configuration
diagram of BIQU-Magician. You may view, use and modify
on basic of actual conditions.
WWW.BIQU.EQUIPMENT
Shenzhen Bigtree Technology Co.,Ltd
7
(2) Slicing Operation
When the installation is completed, you can import a
model to attempt processing and slicing, and generate a
printable Gcode le.
Find out the model le and open it.
The red zone above the model reminds you to add
support. Generate support, select "Touching Build Plate" in
Support Placement, and then click "Prepare" to start slicing.
Table des matières
Autres manuels BIQU Imprimante 3D
