Binary B-900-MOIP-4K-CTRL Manuel utilisateur
Source | Mute | 2ch
(HDMI Out Audio)
INSTALLATION & SETUP GUIDE
MEDIA OVER IP SYSTEM
B-900-MOIP-4K-CTRL
B-900-MOIP-4K-TX
B-900-MOIP-4K-RX
2
3
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of re or electric shock, read and follow all instructions and warnings in this
manual. Keep this manual for future reference.
1. Do not expose to water.
2. Do not remove cover. No user serviceable parts inside.
3. Clean only with a dry cloth.
4. Leave sufcient space between devices and do not block ventilation holes for proper
cooling.
5. Do not stack transmitter or receivers on top of each other.
6. Do not install near any device or source that generates heat.
7. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including ampliers) that produce heat.
8. Do not override the safety purpose of the polarized or grounding plug. A polarized plug has
two blades, one of which is wider than the other. A grounding plug has two matching blades
and a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
9. Protect the power cord from being walked on or pinched, particularly at the plug end and
where the power cord is attached to the apparatus.
10. Only use manufacturer’s recommended power supply if the use of an external power supply
for the transmitter and receiver is necessary.
11. Only use attachments and accessories specied by the manufacturer.
12. Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when the power supply cord or plug is damaged,
liquid has been spilled on or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, the apparatus does not operate normally, or it has been
dropped.
13. Disconnect the power supply cord from the power outlet, or disconnect the transmitter
and receivers from the network PoE connections or remove the network switch power cord
from the outlet, to completely disconnect the controller from power.
4
GETTING STARTED
To get started, you will need:
• 1× per source: MoIP Transmitter B-900-MOIP-4K-TX
• 1× per display: MoIP Receiver B-900-MOIP-4K-RX
• 1× MoIP Controller B-900-MOIP-4K-CTRL
• 1× Layer 2 Managed switch
• Sources, Displays, HDMI cables and category cabling
MoIP Controller B-900-MOIP-4K-CTRL
B-900-MOIP-4K-CTRL
CONTROLLER
Reboot Factory Default
Network
+5VDC
A. Status LED
Solid during system boot | Blinks during normal operation
B. Reboot Button
Use a pin to press the recessed button to restart
C. USB Ports
Not used for the MoIP system
D. Network/LAN Port
Connect to MoIP switch to provide access to MoIP transmitters and receivers
E. HDMI Port
Not used for the MoIP system
F. 12 VDC Power Connection
Connect the power supply provided
G. Factory Default button
Use a pin to press recessed button restore factory settings
A
B GC D E F
5
MoIP Transmitter B-900-MOIP-4K-TX
A. Power Indicator
On: Power on | Blink: Booting | Off: Power off
B. System Status Light
On: Connected to network with source present | Off: Not connected to network |
Blinking: Connected to network and o source present
C. Network Port
Provides access to network and power via Power-over-Ethernet (POE)
D. DIP Switches
Switch 1: IR receiver on/Off | Switch 2: DTE/DCE
E. 3.5 mm Input
Analog Audio embedding to replace HDMI audio
F. L/R Audio Out
RCA Analog audio de-embedding of 2-channel PCM audio
G. RS-232
RJ45, RS-232, (TX, RX, Ground), EIA-561 pin out
H. HDMI IN/OUT
HDMI source input and HDMI loop output for local display
I. IR Receiver
3.5 mm mini Mono/Stereo for external receivers
J. IR Flasher
3.5 mm mini Mono/Stereo output to IR emitter
K. Factory Reset
Press and hold for 10 seconds to restore to factory settings
L. 12 V 2A Power Connection
12VDC 2A locking connection for external power supply (not included)
C E G I LJD F H K
A B
6
MoIP Receiver B-900-MOIP-4K-RX
A. Power Indicator
On: Power on | Blink: Booting | Off: Power off
B. System Status Light
On: Connected to network and not subscribed to transmitter stream | Off: Not
connected to network | Blinking: Connected to network and subscribed to transmitter
stream
C. Network Port
Provides access to network and power via Power-over-Ethernet (POE)
D. DIP Switches
Switch 1: IR receiver On/Off | Switch 2: DTE/DCE
E. 3.5 mm Input
Analog Audio embedding to replace HDMI audio
F. L/R Audio Out
RCA Analog audio de-embedding of 2-channel PCM audio
G. RS-232
RJ45, RS-232, (TX, RX, Ground), EIA-561 pin out
H. HDMI OUT
HDMI source input and HDMI loop output for local display
I. IR Receiver
3.5 mm mini Mono/Stereo for external receivers
J. IR Flasher
3.5 mm mini Mono/Stereo output to IR emitter/asher
K. Factory Reset
Press and hold for 10 seconds to restore to factory settings
L. 12 V 2A Power Connection
12VDC 2A locking connection for external power supply (not included)
C F H KID E G J
A B
7
NETWORKING
Binary’s 900 series Media over IP system is compatible with network switches from multiple
switch manufacturers that meet a set of minimum requirements. The quality, reliability and
actual performance may vary. SnapAV recommends the Araknis line of 210 PoE series and 310
PoE series switches.
All switches compatible with MoIP must be at least a 1 Gigabit Layer 2 Managed switch (Layer
3 is compatible but not required) and have the following features or specications:
• IGMP Snooping
• Multi-cast forwarding or ltering
• IGMP Querier
• IGMP Fast Leave / Instant Leave / Immediate Leave
• Jumbo Frames / Jumbo Packets / Maximum Transmission Unit (8000 bytes or larger)
• 7.5 Watts PoE power per port for each transmitter and receiver (no external power supplies
are provided with each transmitter or receiver)
Recommended Network Topology
Binary’s 900 series MoIP system can be deployed across multiple network topology to support
most applications. We recommend a single dedicated network MoIP switch for the fastest,
simplest install. Please refer to our ‘Networking Guide’ document for other options.
Network
+5VDC
9 11 13 15
10 12 14 16
9 11 13 15
10 12 14 16
MoIP Transmitter (one per source)
MoIP Receiver (one per display)
MoIP Controller (one per system)
Dedicated MoIP Switch Main LAN Switch
Other Network Devices
8
Common System Congurations
Multiple Sources, Multiple Displays
Network
+5VDC
MoIP Switch
Serial 1
HDMI
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
HDMI
Blu-ray/DVD
Amazon Fire TV
Apple TV
HDMI
HDMI
HDMI
HDMI
IR 2
IR 1
Cat5e
Cat5e Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Stereo Output
Stereo Input (1-5)
HDMI
Receiver
Living Room - Sony Model A
Guest Bedroom - Sony Model A
Outdoor TV - SunBriteTV
Master Bedroom - LG
Crown CD 1000 Amp
801e Amp
IR 1
Serial 1
HDMI
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
HDMI
Blu-ray/DVD
Amazon Fire TV
Apple TV
Control System
Cable Box
MoIP TX 1
MoIP TX 2
MoIP TX 3
MoIP TX 4
MoIP TX 5
HDMI
HDMI
HDMI
IR 2
IR 2
IR 3
IR 1
Cat5e
Cat5e Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Stereo Output
Stereo Input (1-5)
HDMI
Receiver
4K Display 1
4K HDR Display 2
4K Display 3
1080p Display 4
Crown CD 1000 Amp
801e Amp
IR 1
Multiple Sources with Video Wall
Network
+5VDC
MoIP Switch
IR
IRIR
IR
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
HDMI
Blu-ray/DVD
Amazon Fire TV
Apple TV
Cablebox
HDMI
HDMI
HDMI
HDMI
Cat5e
Cat5e Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
Blu-ray/DVD
Amazon Fire TV
Apple TV
Cablebox
HDMI
HDMI
HDMI
HDMI
IR
IR
IR
Cat5e
Cat5e Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
2 × 2 Video Wall
IR Receiver
IR Remote
IRIR IRIR IRIR
9
One Source Multiple Displays
Stereo Input (1-5)
801e Amp
Stereo Input
801e Amp
Network
+5VDC
MoIP Switch
HDMI
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
Cablebox
Cat5e
Cat5e
Cat5e
Cat5e
Cat5e
Living Room - Sony Model A
Guest Bedroom - Sony Model A
Outdoor TV - SunBriteTV
Master Bedroom - LG
IR
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
MoIP RX 1
MoIP RX 2
MoIP RX 3
MoIP RX 4
MoIP Controller
Cablebox
Control System
Cat5e
Cat5e
Cat5e Cat5e
Cat5e
Cat5e
Cat5e
4K Display 1
4K HDR Display 2
4K Display 3
1080p Display 4
IR
IR
IR
Serial
Serial
Serial
Serial
CONFIGURATION
1. Congure Network Switch
(Steps below use an Araknis 210 PoE or 310 PoE Series switch as an example)
1. Factory default the MoIP switch to be used for all MoIP components (not necessary for new
switches). Press and hold the reset button for 10—15 seconds until the Status LED ashes
once. This will reboot the switch and reset to factory settings.
2. Connect the dedicated MoIP switch directly to your Main LAN switch. The Main LAN
switch is the main network switch into which all other switches and network devices are
connected. The Main LAN switch is the only switch connected to the router. A dedicated
MoIP switch is preferred but not required. (See ‘Network Guide’ for more information.)
3. Access the local UI of the MoIP Switch.
Note: Default login in credentials for an Araknis switch are araknis / araknis. The Default IP
address is 192.168.20.254.
2. Enable IGMP Snooping
Choose ADVANCED > MULTICAST > IGMP SNOOPING, then check options as follows:
1. Status: Enabled
2. Version: V2
3. Report Suppression: Enabled
4. Unregistered IPMC Forward Action: Flood
5. IGMP Snooping Status: Enabled
6. Fast Leave: Enabled
7. Querier State: Enabled
8. Querier Version: V2
9. Router Settings > Router Ports Auto-Learned: Enabled
Click Apply to save these settings
10
3. Verify Jumbo Frame
Choose SETTINGS > PORTS, then verify Jumbo Frame is set to greater than 8,000 Bytes. The
default value is 9216 (the maximum) and is acceptable.
4. Setup the MoIP Controller
Claim MoIP controller on OvrC and access the local UI.
IMPORTANT: This is REQUIRED for rmware maintenance.
1. For existing OvrC locations:
a. Log into OvrC and go to Customer>Devices
b. A new device will show ready to add. Click “+ Device”, > ‘Media Devices’ and follow the
prompts to claim the MoIP controller.
Autres manuels pour B-900-MOIP-4K-CTRL
1
Ce manuel convient aux modèles suivants
2
Table des matières
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
