Billion BIPAC- 8500 Manuel utilisateur

BIPAC- 8500 / 8520

SHDSL VPN Firewall Bridge / Router

Quick Start Guide

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Package Contents

BIPAC-8500 / 8520 SHDSL Bridge / Router

CD-ROM containing the online manual

RJ-11 SHDSL / telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide

 Do not use the BIPAC-8500 / 8520 in high humidity or high

temperatures.

 Do not use the same power source for the BIPAC-8500 / 8520 as

other equipment.

 Do not open or repair the case yourself. If the BIPAC-8500 /

8520 is too hot, turn off the power immediately and have it

repaired at a qualified service center.

Warning

 Place the BIPAC-8500 / 8520 on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

ttention

For more detailed instructions on configuring and using

the SHDSL Firewall Bridge / Router, please refer to the

on-line manual.

Quick Start Guide

The Front LEDs

LED Meaning

LINE 1 & 2

Lit when successfully connected to SHDSL line and it is

synchronized.

3 LAN Port

1X — 4X

(RJ-45 connector)

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

4 SYS Lit when the system is ready.

5 PWR Lit when power is ON.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

The Rear Ports

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

5 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

6 LINE

1X — 2X

(RJ-11 connector

Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the A SHDSL line.

＊Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one.

Quick Start Guide

Connecting Your SHDSL Bridge / Router

1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE

LED are lit.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click

Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Billion Routeur réseau

Billion

Billion BiPAC 7300M Manuel utilisateur

Billion

Billion BIPAC 7402W Manuel utilisateur

Billion

Billion BiPAC 5210G RC Manuel utilisateur

Billion

Billion BiPAC 5210S Manuel utilisateur

Billion

Billion BiPAC 7404V series Manuel utilisateur

Billion

Billion BiPAC 5100S Manuel utilisateur

Billion

Billion BiPAC 7301VGP Manuel utilisateur

Billion

Billion Bipac 74 Series Manuel utilisateur

Billion

Billion BiPAC 6404VGP R3 Manuel utilisateur

Billion

Billion BIPAC-645 Manuel utilisateur

Billion

Billion BiPAC 7100SG Manuel utilisateur

Billion

Billion BiPAC 7404VNOX Manuel utilisateur

Billion

Billion BiPAC 8501 R3 Manuel utilisateur

Billion

Billion BiPAC 7404VGP Manuel utilisateur

Billion

Billion 800VGT Manuel utilisateur

Billion

Billion BiPAC 7402VL Manuel utilisateur

Billion

Billion BiPAC 7800(N) Manuel utilisateur

Billion

Billion BIPAC 7500 Manuel utilisateur

Billion

Billion BiPAC 7402 Manuel utilisateur

Billion

Billion BiPAC 4700ZU Manuel utilisateur

Billion

Billion BiPAC 8700NEXL R2 Manuel utilisateur

Billion

Billion BiPAC 6404VGP R3 Manuel utilisateur

Billion

Billion BiPAC 5200G Series Manuel utilisateur

Billion

Billion BiPAC 7202 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur