BGS technic 9246 Manuel utilisateur

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 9246

Workshop Press | 20 t

FEATURE

1. Used for parts straightening, bending and pressing.

2. Multi-position bed for work height adjustment.

3. With air pump can reduce labor and improve working efficiency

WARNING

•This press is designed and intended for use by properly trained and experienced personnel only.

If you are not familiar with the proper and safe operation of a hydraulic press, do not use until

proper training and knowledge has been obtained.

•Do not operate this press beyond it rated capacity.

•DO NOT compress springs or other objects that could be ejected from the press. DO NOT

compress objects that could shatter.

•Please understand the max. working stroke before operate, Do not overload the max. working

stroke, so as not to damage parts.

•Check the press for loose or damaged parts before each operation. Replace damaged parts and

tighten all loose bolts before operating.

•Some parts being pressed may have a tendency to pop out of the press or explode under

pressure. Protect yourself accordingly.

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

OPERATION

1. Place work piece on bed frame.

2. Locate and close release valve.

3. Pump handle until the ram nears work piece.

4. Apply load to work piece by pumping handle. Do not overload work piece.

5. Remove load from work piece by turning release valve. Stabilize work piece so it does not fall

while pressure is released.

6. Remove work piece after ram is fully retracted.

MAINTENANCE

•

Periodically, lightly oil all moving parts including the pump piston and hydraulic ram.

•

Check hydraulic connections and hoses before each use.

•

Do not use if cut, damaged, leaking or otherwise damaged connections and/or hoses are noted

DISASSEMBLE DRAWING

No.

Description

Qty.

Pressure gauge

Damping nut M16

Washer M16

Jack

Pole

Bolt M1

0×15

Washer M10

Tighter the scres

Damping nut M10

Connect board

Bolt M1

0×25

Leg

Handle

Pump

Adjust beam

Arbor plate

Limit circle

Limit ring

Cross beam

Bolt M1

6×40

BGS technic KG

Bandwirkerstr. 3

42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

EU-Konformitätserklärung

EC DECLARATION OF CONFORMITY

DÉCLARATION „CE“ DE CONFORMITE

DECLARATION DE CONFORMIDAD UE

Wir erklären in alleiniger Verantwortung, dass die Bauart der:

We declare that the following designated product:

Nous déclarons sous propre responsabilité que ce produit:

Declaramos bajo nuestra sola responsabilidad que este producto:

Werkstatt-Presse 20 to ( BGS Art. 9246 )

Hydraulic Shop Press

Presse d’atelier

Prensa de taller

folgenden einschlägigen Bestimmungen entspricht:

complies with the requirements of the:

est en conformité avec les réglementations ci-dessous:

esta conforme a las normas:

Machinery Directive 2006/42/EC

Angewandte Normen:

Identification of regulations/standards:

Norme appliquée:

Normas aplicadas:

EN ISO 12100-1:2003

EN ISO 12100-2:2003

EN 1494:2000

Certification No. : GB/1067/1528/09 / ZD07202

Reference: CE2009WF119/9

Wermelskirchen, den 24.01.2014

ppa.

Frank Schottke, Prokurist

BGS technic KG, Bandwirkerstrasse 3, D-42929 Wermelskirchen

Table des matières

Autres manuels BGS technic Outils

BGS technic

BGS technic 98253 Manuel utilisateur

BGS technic

BGS technic 3391 Manuel utilisateur

BGS technic

BGS technic 1779 Manuel utilisateur

BGS technic

BGS technic BGS 360 Manuel utilisateur

BGS technic

BGS technic 62636 Manuel utilisateur

BGS technic

BGS technic 7744 Manuel utilisateur

BGS technic

BGS technic 70114 Manuel utilisateur

BGS technic

BGS technic 8845 Manuel utilisateur

BGS technic

BGS technic 9379 Manuel utilisateur

BGS technic

BGS technic 9530 Manuel utilisateur

BGS technic

BGS technic 66205 Manuel utilisateur

BGS technic

BGS technic 62005 Manuel utilisateur

BGS technic

BGS technic B4204 Manuel utilisateur

BGS technic

BGS technic 9695 Manuel utilisateur

BGS technic

BGS technic 9689 Manuel utilisateur

BGS technic

BGS technic 6890 Manuel utilisateur

BGS technic

BGS technic 6761 Manuel utilisateur

BGS technic

BGS technic 9396 Manuel utilisateur

BGS technic

BGS technic 9637 Manuel utilisateur

BGS technic

BGS technic 7744 Manuel utilisateur

BGS technic

BGS technic 3531 Manuel utilisateur

BGS technic

BGS technic 62665 Manuel utilisateur

BGS technic

BGS technic 3141 Manuel utilisateur

BGS technic

BGS technic 6643 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser

Goobay

Goobay 97790 Manuel utilisateur