Bender ISOMETER IR1575PG1 Manuel utilisateur

Manual

ISOMETER® IR1575PG1

Insulation monitoring device for IT AC and DC systems with integrated

test current generator for insulation fault location

IR1575PG1_D00357_01_M_XXEN/12.2019

Bender GmbH & Co. KG

P.O. Box 1161 • 35301 Grünberg • Germany

Londorfer Str. 65 • 35305 Grünberg • Germany

Tel.: +49 6401 807-0 • Fax: +49 6401 807-259

E-mail: info@bender.de • www.bender.de

©Bender GmbH & Co. KG

Reprinting only with permission of the publisher.

Subject to change!

Photos: Bender archive

Table of Contents

IR1575PG1_D00357_01_M_XXEN/12.2019

1. Important information ........................................................................... 6

1.1 How to use this manual ................................................................................... 6

1.2 Technical support: Service and support .................................................... 7

1.2.1 First level support .............................................................................................. 7

1.2.2 Repair service ...................................................................................................... 7

1.2.3 Field service ......................................................................................................... 8

1.3 Training courses ................................................................................................. 8

1.4 Delivery conditions ........................................................................................... 8

1.5 Inspection, transport and storage ............................................................... 8

1.6 Warranty and liability ....................................................................................... 9

1.7 Disposal ................................................................................................................. 9

2. Safety instructions ............................................................................... 10

2.1 General safety instructions .......................................................................... 10

2.2 Work activities on electrical installations ................................................ 10

2.3 Intended use ..................................................................................................... 11

2.4 Directions for installation ............................................................................. 11

3. Function ................................................................................................. 13

3.1 IR1575PG1 characteristics ............................................................................ 13

3.2 Product description ........................................................................................ 13

3.3 Function .............................................................................................................. 13

4. Commissioning flow chart .................................................................. 17

4.1 Commissioning of the ISOMETER® functionality ................................. 17

4.2 Commissioning of the insulation fault location function

(EDS) (1) ............................................................................................................... 20

4.3 Commissioning of the insulation fault location function

(EDS) (2) ............................................................................................................... 21

Table of Contents

4IR1575PG1_D00357_01_M_XXEN/12.2019

5. Connection ............................................................................................. 22

5.1 Wiring ................................................................................................................... 22

6. Operation and setting .......................................................................... 25

6.1 Operating elements and displays IR1575PG1 ....................................... 25

6.1.1 Display in the standard mode ..................................................................... 26

6.1.2 Display in the Menu mode ........................................................................... 26

6.1.3 Display in the EDS mode ............................................................................... 27

6.1.4 Function keys .................................................................................................... 27

6.2 Menu structure ................................................................................................. 28

6.2.1 Diagram menu structure .............................................................................. 30

6.3 ISO SETUP menu: ISOMETER® default settings ..................................... 30

6.3.1 Response values Alarm1 and Alarm2 ....................................................... 30

6.3.2 Operating principle of the alarm relays ................................................... 31

6.3.3 Diagram ISO SETUP ......................................................................................... 32

6.3.4 Memory setting (on/off) ................................................................................ 33

6.4 EDS SETUP menu: default settings for fault location .......................... 33

6.4.1 EDS on / auto / 1cycle / off .......................................................................... 33

6.4.2 maxPuls: 10/25 mA ......................................................................................... 34

6.4.3 Diagram EDS-SETUP ....................................................................................... 34

6.5 PASSWORD menu ........................................................................................... 35

6.5.1 Password activation and setting ................................................................ 35

6.5.2 Diagram PASSWORD ...................................................................................... 36

6.6 LANGUAGE menu ............................................................................................ 36

6.6.1 Language setting ............................................................................................. 36

6.6.2 Diagram Language ......................................................................................... 37

6.7 SERVICE menu ................................................................................................... 37

6.8 INFO menu ......................................................................................................... 38

6.8.1 Diagram INFO ................................................................................................... 38

7. Operation with EDS device EDS460-D-... .......................................... 39

Table of Contents

IR1575PG1_D00357_01_M_XXEN/12.2019

8. Technical data IR1575PG1 ................................................................. 40

8.1 Data in tabular form ....................................................................................... 40

8.2 Standards and approvals .............................................................................. 43

8.3 Characteristic curves ...................................................................................... 44

8.4 Dimension diagram enclosure IR1575PG1 ............................................. 46

8.5 Ordering details ............................................................................................... 47

8.5.1 Standard version .............................................................................................. 47

8.5.2 Label for modified versions ......................................................................... 47

INDEX ........................................................................................................... 48

6IR1575PG1_D00357_01_M_XXEN/12.2019

1. Important information

1.1 How to use this manual

Always keep this manual within easy reach for future reference.

To make it easier for you to understand and revisit certain sections in this manual,

we have used symbols to identify important instructions and information.

The meaning of these symbols is explained below:

This manual is intended for electrically skilles persons working in electrical

engineering and electronics.

This signal word indicates that there is a high risk of danger that will result

in death or serious injury if not avoided.

This signal word indicates a medium risk of danger that can lead to

death or serious injury if not avoided.

This signal word indicates a low level risk that can result in minor or

moderate injury or damage to property if not avoided.

This symbol denotes information intended to assist the user

in making optimum use of the product.

DANGER

WARNING

CAUTION

Important information

IR1575PG1_D00357_01_M_XXEN/12.2019

1.2 Technical support: Service and support

For commissioning and troubleshooting Bender offers you:

1.2.1 First level support

Technical support by phone or e-mail for all Bender products

 Questions concerning specific customer applications

 Commissioning

 Troubleshooting

Telephone: +49 6401 807-760*

Fax: +49 6401 807-259

In Germany only: 0700BenderHelp (Telefon und Fax)

E-Mail: [email protected]

1.2.2 Repair service

Repair, calibration, update and replacement service for Bender products

 Repairing, calibrating, testing and analysing Bender products

 Hardware and software update for Bender devices

 Delivery of replacement devices in the event of faulty or incorrectly

delivered Bender devices

 Extended warranty for Bender devices with in-house repair service or

replacement device at no extra cost

Telephone: +49 6401 807-780** (technical issues)/

+49 6401 807-784**, -785** (sales)

Fax: +49 6401 807-789

E-Mail: [email protected]

Please send devices for the repair service to the following address:

Bender GmbH, Repair Service,

Londorfer Str. 65,

35305 Grünberg

Important information

8IR1575PG1_D00357_01_M_XXEN/12.2019

1.2.3 Field service

On-site service for all Bender products

 Commissioning, parameter setting, maintenance, troubleshooting for products

 Analysis of the electrical installation in the building (power quality test, EMC test,

thermography)

 Training courses for customers

Telephone: +49 6401 807-752**, -762 **(technisch)/

+49 6401 807-753** (kaufmännisch)

Fax: +49 6401 807-759

E-Mail: [email protected]

Internet: www.bender-de.com

*Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC+1)

**Mo-Thu 7.00 a.m. - 4.00 p.m., Fri 7.00 a.m. - 1.00 p.m.

1.3 Training courses

Bender is happy to provide training regarding the use of test equipment.

The dates of training courses and workshops can be found on the Internet at

www.bender-de.com -> Know-how -> Seminars.

1.4 Delivery conditions

Bender sale and delivery conditions apply. For software products the "Softwareklausel

zur Überlassung von Standard-Software als Teil von Lieferungen, Ergänzung und

Änderung der Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der

Elektroindustrie" (software clause in respect of the licensing of standard software as

part of deliveries, modifications and changes to general delivery conditions for pro-

ducts and services in the electrical industry) set out by the ZVEI (Zentralverband Elekt-

rotechnik- und Elektronikindustrie e. V.) (German Electrical and Electronic

Manufacturer's Association) also applies.

Sale and delivery conditions can be obtained from Bender in printed or electronic for-

mat.

1.5 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the contents

of the package with the delivery documents. In the event of damage in transit, please

contact Bender immediately.

Important information

IR1575PG1_D00357_01_M_XXEN/12.2019

The devices must only be stored in areas where they are protected from dust, damp,

and spray and dripping water, and in which the specified storage temperatures can be

ensured.

1.6 Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to property are

excluded if they can be attributed to one or more of the following causes:

 Improper use of the device.

 Incorrect mounting, commissioning, operation and maintenance of the device.

 Failure to observe the instructions in this operating manual regarding transport,

commissioning, operation and maintenance of the device.

 Unauthorised changes to the device made by parties other than the manufactu-

rer.

 Non-observance of technical data.

 Repairs carried out incorrectly and the use of replacement parts or accessories not

approved by the manufacturer.

 Catastrophes caused by external influences and force majeure.

 Mounting and installation with device combinations not recommended by the

manufacturer.

This operating manual, especially the safety instructions, must be observed by all per-

sonnel working on the device. Furthermore, the rules and regulations that apply for

accident prevention at the place of use must be observed.

1.7 Disposal

Abide by the national regulations and laws governing the disposal of this device. Ask

your supplier if you are not sure how to dispose of the old equipment.

The directive on waste electrical and electronic equipment (WEEE directive) and the di-

rective on the restriction of certain hazardous substances in electrical and electronic

equipment (RoHS directive) apply in the European Community. In Germany, these poli-

cies are implemented through the "Electrical and Electronic Equipment Act" (ElektroG).

According to this, the following applies:

 Electrical and electronic equipment are not part of household waste.

 Batteries and accumulators are not part of household waste and must be

disposed of in accordance with the regulations.

 Old electrical and electronic equipment from users other than private households

 which was introduced to the market after 13 August 2005 must be taken back by

the manufacturer and disposed of properly.

For more information on the disposal of Bender devices, refer to our homepage at

www.bender-de.com -> Service & support.

IR1575PG1_D00357_01_M_XXEN/12.2019

2. Safety instructions

2.1 General safety instructions

Part of the device documentation in addition to this manual is the enclosed "Safety in-

structions for Bender products".

2.2 Work activities on electrical installations

If the device is used outside the Federal Republic of Germany, the applicable local stan-

dards and regulations must be complied with. The European standard EN 50110 can be

used as a guide.

Only qualified personnel are permitted to carry out the work necessary to

install, commission and run a device or system.

Risk of fatal injury due to electric shock!

Touching live parts of the system carries the risk of

 An electric shock,

 Damage to the electrical installation,

 Destruction of the device.

Before installing and connecting the device, make sure that the

installation has been de-energised. Observe the rules for working on

electrical installations.

Observe the details of the nominal mains voltage and supply voltage

according to the technical data!

DANGER

Table des matières

Autres manuels Bender Instrument de mesure

Bender

Bender NGRM500 Manuel utilisateur

Bender

Bender ISOMETER IR425-D4M 1C Manuel utilisateur

Bender

Bender RCMA420-DM Manuel utilisateur

Bender

Bender AF460 Manuel utilisateur

Bender

Bender COM465IP Manuel utilisateur

Bender

Bender MK2007CBM Manuel utilisateur

Bender

Bender ISOMETER iso1685DP-425 Manuel utilisateur

Bender

Bender ISOMETER IR423-D4 Manuel utilisateur

Bender

Bender LINETRAXX PEM555 Manuel utilisateur

Bender

Bender ISOMETER iso1685FR Manuel utilisateur

Bender

Bender Isometer IR420-D4 Manuel utilisateur

Bender

Bender VMD423H Manuel utilisateur

Bender

Bender ISOMETER isoPV with AGH-PV Manuel utilisateur

Bender

Bender ISOMETER isoNAV685-D Manuel utilisateur

Bender

Bender PEM330 Manuel utilisateur

Bender

Bender COM465IP Manuel utilisateur

Bender

Bender ISOMETER isoPV1685DP Manuel utilisateur

Bender

Bender NGRM700 Manuel utilisateur

Bender

Bender CMD420-DM Manuel utilisateur

Bender

Bender AGH675S-7 Manuel utilisateur

Bender

Bender ISOMETER IR420-D6 Manuel utilisateur

Bender

Bender COMTRAXX MK800 Manuel utilisateur

Bender

Bender ISOMETER isoGEN523-S4-4 Manuel utilisateur

Bender

Bender ISOMETER isoPV425 with AGH420 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur