Bender RFID113 Manuel utilisateur

Manual

RFID113

For use in combination with charge controllers used in

electric vehicle charging stations, wall boxes and street

light charging points

RFID113_D00303_00_M_XXEN/05.2018

Bender GmbH & Co. KG

P.O. Box 1161 • 35301 Grünberg • Germany

Londorfer Strasse 65 • 35305 Grünberg • Germany

Tel.: +49 6401 807-0 • Fax: +49 6401 807-259

E-Mail: [email protected] • www.bender.de

©Bender GmbH & Co. KG

Reprinting only with permission of the publisher.

Subject to change!

Photos: Bender archives

Table of Contents

RFID113_D00303_00_M_XXEN/05.2018

1. Important information .................................................................................... 5

1.1 How to use this manual ................................................................................. 5

1.2 Technical support: service and support ................................................... 5

1.3 Delivery conditions .......................................................................................... 6

1.4 Inspection, transport and storage .............................................................. 6

1.5 Disposal ............................................................................................................... 6

1.6 Intended use ...................................................................................................... 6

2. RFID module ..................................................................................................... 8

2.1 Dimensions for mounting ............................................................................. 9

2.2 Operation ......................................................................................................... 10

2.3 Integration ....................................................................................................... 10

2.3.1 RJ45 connector pin assignment ............................................................... 11

3. Technical data ................................................................................................. 12

3.1 Tabular data .................................................................................................... 12

3.2 Standards, approvals, certifications ........................................................ 13

3.3 Ordering information .................................................................................. 13

RFID113_D00303_00_M_XXEN/05.2018

1. Important information

1.1 How to use this manual

Always keep this manual within easy reach for future reference.

1.2 Technical support: service and support

Technical support by phone or e-mail for all Bender products.

 Questions concerning specific customer applications

 Commissioning

 Troubleshooting

Telephone: +49 6401 807-760*

Fax: +49 6401 807-259

In Germany only: 0700BenderHelp (Tel. and Fax)

E-mail: [email protected]

*Available from 7.00 a.m. to 8.00 p.m. 365 days a year (CET/UTC+1)

This manual is intended for qualified personnel working in

electrical engineering and electronics!

This symbol denotes information intended to assist the user

in making optimum use of the product.

Important information

6RFID113_D00303_00_M_XXEN/05.2018

1.3 Delivery conditions

Bender sale and delivery conditions apply. These can be obtained from Bend-

er in printed or electronic format.

1.4 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the

contents of the package with the delivery documents. In the event of damage

in transit, please contact Bender immediately. The devices must only be

stored in areas where they are protected from dust, damp, and spray and drip-

ping water, and in which the specified storage temperatures can be ensured.

1.5 Disposal

Abide by the national regulations and laws governing the disposal of this de-

vice. Ask your supplier if you are not sure how to dispose of the old equip-

ment. For more information on the disposal of Bender devices, refer to our

homepage at www.bender.de -> Service & support.

1.6 Intended use

This manual provides a description of an RFID module which can only be used

in combination with the ICC1612 charge controller. The charge controller is

designed for use in electric vehicle (EV) charging stations, wall boxes and

street light charging points. This document should be used together with the

ICC1612 charge controller operating manual, and the AN119 and LEDM100

module operating manuals, all of which can be downloaded from:

www.bender.de/manuals.

The RFID module is a separate PCB which facilitates user interaction with the

charging system and is designed according to ISO14443A/MIFARE. It can be

connected to the charge controller, the main component of a charging sys-

tem, using a standard RJ45 cable.

RFID113_D00303_00_M_XXEN/05.2018

Charging is initiated by holding a valid RFID card, which is registered to a

backend system, close to the reader on the RFID module. Charging starts

when the contactor in the charging system is switched on to provide power

flow. In offline operation, the charge controller can optionally allow charging

without authorization or it can authorize users based on RFID and a local

white list of authorized RFID cards.

RFID module

8RFID113_D00303_00_M_XXEN/05.2018

2. RFID module

The RFID module, shown below, contains a card reader .

The RFID module must be placed at a distance of at least 20

mm from any significant metal surface or metal parts to

ensure optimum RFID reading performance.

CAUTION

Electrostatic discharge (ESD) can damage electronic compo-

nents. Observe the precautions for handling electrostatically

sensitive components in accordance with DIN EN 61340-5-1

and DIN EN 61340-5-2.

Socket for RJ45 cable

RFID module

RFID113_D00303_00_M_XXEN/05.2018

The RFID frequency is 13.56 MHz. The PN532 Near Field Communication

(NFC) controller is used for contactless communication, which supports virtu-

ally all RFID/NFC communication means on this frequency. Currently only pas-

sive tags with a UID are read. Further functionality is possible upon request.

2.1 Dimensions for mounting

All dimensions in mm

The RFID module is connected to the charge controller via a

standard RJ45 cable.

10.00

38.00

50.00

92.50

50.00

85.00

15.00

3.10 3.10

3.10

RFID module

10 RFID113_D00303_00_M_XXEN/05.2018

2.2 Operation

Charging is initiated by holding a valid RFID card close to the reader on the

RFID module. The status of the charging system is shown by the 12 RGB LEDs

on the LEDM100 module.

Charging can be terminated when the RFID card is again held in front of the

charging system.

2.3 Integration

The RFID module is integrated solely in conjunction with ICC1612 charge con-

trollers under professional installation. In most cases these charge controllers

implement the functionality of an electric vehicle charging system in which

the RFID module is used to authorize charging transactions.

The LEDM100 module is described in a separate operating

manual, which can be downloaded from

www.bender.de/manuals

Table des matières

Autres manuels Bender Unité de contrôle

Bender

Bender LINETRAXX MRCDB423 Manuel utilisateur

Bender

Bender RCMB103 Manuel utilisateur

Bender

Bender RCMA126P1-S Manuel utilisateur

Bender

Bender ATICS UMA710-2-63-ISO Manuel utilisateur

Bender

Bender MRCDB300 Series Manuel utilisateur

Bender

Bender RCMB300 Series Manuel utilisateur

Bender

Bender MEDICS USC710D4 HA Series Manuel utilisateur

Bender

Bender MEDICS UMC710D4-HA Series Manuel utilisateur

Bender

Bender RCMB101 Manuel utilisateur

Bender

Bender RFID110-L1 Manuel utilisateur

Bender

Bender RFID117-L1 Manuel utilisateur

Bender

Bender LINETRAXX SmartDetect RCMS410 Manuel utilisateur

Bender

Bender RCMB300 Series Manuel utilisateur

Bender

Bender RFID117-L1 Manuel utilisateur

Bender

Bender RCMB330 Manuel utilisateur

Bender

Bender ISOMETER iso685 -CN Series Manuel utilisateur

Bender

Bender RCMB102 Manuel utilisateur

Bender

Bender MEDICS UMC107E-25 Manuel utilisateur

Bender

Bender RCMB104 Manuel utilisateur

Bender

Bender RFID105-L1 Manuel utilisateur

Bender

Bender RFID114 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur