Belkin F5U237 Manuel utilisateur
Hi-Speed USB 2.0
7-Port Hub
Connect up to 7 Hi-Speed USB 2.0 or USB 1.1 devices
User Manual
F5U237ea
En
Fr
De
Nl
Es
It
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 1
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 2
En
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The Belkin Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System Requirements for Mac® . . . . . . . . . . . . . . . . . . . . . . .3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 3
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 4
1
En
INTRODUCTION
Congratulations and thank you for purchasing the Belkin Hi-Speed USB
2.0 7 Port hub (the Hub). The hub provides 7 downstream USB ports
that are compatible with both USB 1.1 (Low Speed and Full Speed)
devices, as well as with USB2.0 (Hi-Speed) devices.
This means that the Hub is “backward-compatible” with all of your
current USB 1.1 devices as well as the new generation of “Hi-Speed”
USB 2.0 devices. This may include such peripherals as scanners, printers,
mass storage devices, and high resolution cameras. The Hub is self
powered, which allows the cascading of devices with additional hubs, so
that up to 127 USB devices to be connected to a single port.
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 1
2
OVERVIEW
The Belkin Advantage
An exciting new feature unique to the Belkin 7 port hub are the two
vertically mounted downstream USB ports that offer easy access for
temporary connections such as USB thumb drives, media readers, and
personal convenience accessories such as USB lights and fans. The Hub
also provides 7 port status LEDs, and 1 master power LED.
Features
• Compliant with Universal Serial Bus Specification 2.0 (data rate
1.5/12/480 Mbps)
• Backward-compatible with Universal Serial Bus Specification 1.1
(Data Rate 1.5/12 Mbps)
• Compatible with Windows 98SE, Me, 2000, and XP
• Approved by USB Implementers Forum (USB-IF)
• Supports Plug and Play specifications
• Supports “hot swapping” of USB devices
• Over-current detection and protection
• Individual Port Status Indicator LED’s
• Five horizontally mounted 480 Mbps downstream ports
• Two vertically mounted 480 Mbps downstream ports
• Fully compatible with USB 1.1 and USB 2.0 devices
• Compact slim-line design
• Two hubs may be stacked on top of one another
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 2
3
En
OVERVIEW
System Requirements for Mac®
• Supports low- (1.5Mbps) and full-speed modes (12Mbps) on USB-
enabled Mac computers prior to PowerMac® G5
• Supports low- (1.5Mbps), full- (12Mbps), and high-speed modes
(480Mbps) on PowerMac G5 and above, or on other Mac computers
equipped with a USB 2.0 upgrade card
Package Contents
• High Speed USB 2.0 compliant 7 Port Hub
• AC Power Adapter
• User Manual
• USB device cable
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 3
4
OVERVIEW
Technical Specifications
Upstream Ports (1)
Downstream Ports (7)
Per-port Voltage DC +5V
Per Port Current 500mA (max)
Power Mode Self-Powered
Operating Temperature 5ºC ~ 40ºC
Storage Temperature -20ºC ~ 60ºs
Enclosure ABS
Power Supply
Output: DC 6V, 4A
Plug Size: 3.5mm (outer) 1.0mm (center)
Plug Polarity: Center Positive
Main Power LED Color Definitions:
Off Not Operational
Red Operational
Port Status LED Color Definitions:
Off Over Current Condition
Green Fully Operational
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 4
5
En
INSTALLATION
Important Note: Do not connect USB devices to the hub until you are
instructed to do so in step 4 of this user guide.
1. Plug the AC adapter into a wall outlet, or surge suppressor. Plug the
DC connector into the DC Power Jack found on the rear of the hub
2. Plug the flat end (USB A connector) of the provided USB device cable
into the downstream port of your computer, or downstream port of
another hub, then plug the other end (USB mini B connector) of the
device cable into the upstream port on the rear of the hub.
Important Note: The hub must be connected to a USB 2.0 compliant host
in order to function in Hi-Speed mode (480Mbps data
rate). If the hub is connected to a USB 1.1 compliant
host, it will operate only in Low Speed or Full Speed
mode (1.5 Mbps/12 Mbps).
3. Windows will now detect your hub and install the required driver
support. (The Windows “Install New Hardware Wizard” may prompt
you to provide your Windows Installation CD to complete the driver
installation process).
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 5
6
INSTALLATION
Important Note: Hi-Speed hub drivers are included with most USB 2.0 PCI
upgrade cards, and are pre-installed along with the PCI
card drivers. If you purchased an upgrade card prior to
the release of Hi-Speed hub support, please check with
your PCI card vendor for an updated USB 2.0 driver. The
Belkin USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
www.belkin.com.
4. Plug the USB-A connector of the USB device, or an additional hub,
into any of the downstream ports of the F5U237.
Important Note: When moving a device from one port on the hub to
another, it may be necessary to re-install the USB drivers
for that device.
P74387ea_F5U237ea_uk 09-09-2003 10:07 Page 6
Autres manuels pour F5U237
1
Table des matières
Autres manuels Belkin Changer
Belkin
Belkin F1DN104K-3 Feuille d'instructions
Belkin
Belkin OmniView F1DB102P Manuel utilisateur
Belkin
Belkin F1DN104F-3 Manuel utilisateur
Belkin
Belkin OmniCube Manuel utilisateur
Belkin
Belkin F1DN104C-3 Manuel utilisateur
Belkin
Belkin F1DN104a Manuel utilisateur
Belkin
Belkin F1DN002MOD-KM-4 Manuel utilisateur
Belkin
Belkin F5U021 Guide d'installation
Belkin
Belkin OmniView F1DE108C Manuel utilisateur
Belkin
Belkin F1DF102U - Flip USB KVM Switch Manuel utilisateur
Belkin
Belkin F1DA108Q Manuel utilisateur
Belkin
Belkin BITRONICS P72655 Manuel utilisateur
Belkin
Belkin F1U126-KIT Manuel utilisateur
Belkin
Belkin F1DG102D Manuel utilisateur
Belkin
Belkin 24-Port Gigabit Switch Manuel utilisateur
Belkin
Belkin F1DG102W - Flip Wireless KVM Manuel utilisateur
Belkin
Belkin F1DE101H Manuel utilisateur
Belkin
Belkin F1DN102K-3 Manuel utilisateur
Belkin
Belkin OmniView F1DG102W Manuel utilisateur
Belkin
Belkin OmniView F1DH102U Guide de démarrage rapide
