Belkin F5D6230-3 Manuel utilisateur

Belkin Components

501 West Walnut Street

Compton • CA • 90220 • USA

310.898.1100

Mac is a registerd trademark of Apple Computer, Inc. P73882

belkin.com

Belkin Components, Ltd.

Unit 13 • Gatelodge Close • Round Spinney

Northampton • Northants • NN3 8RX • United Kingdom

+44 (0) 1604678300

Belkin Components, Ltd.

7 Bowen Cresent • West Gosford

NSW 2250 • Australia

+61 (2) 4372 8600

Wireless

Cable/DS

Gateway Router

Quick Setup Guide for Mac®

F5D6230-3

Setting up the Router is accomplished in three easy steps:

1. Connect the Router to your network.

2. Configure your computer’s TCP/IP settings.

3. Configure the Router to your ISP’s settings.

Step 1: Connect the Router to your network

1. Power down your equipment.

2. Connect a network cable between each of your computers and the Router.

Connect each Mac to one of the ports on the rear of the Router labeled 1–3.

Do not connect a computer to the port labeled “WAN”.

3. Connect a network cable between the Router and your cable or

DSL modem.

Be sure this cable is plugged into the port labeled "WAN" on the Router.

4. Power on the cable or DSL modem.

BELKIN

GATEWAY

ROUTER

5. Select your connection type (this information is provided by your ISP) and click

"Select". Depending on your selection, you will see the "Static IP Address" page or

the "PPPoE" page. Enter the required values provided by your ISP and click "Enter".

6. The “MAC Cloning/Entry” screen will appear. If your ISP binds your connection to

the MAC address of your network adapter, click "Clone MAC Address" or enter the

MAC address here. Press “Enter”.

Your Router has been set up to communicate with your ISP.You should have Internet

access at this point. If you are having trouble, see the “Troubleshooting” section in the

user’s manual.

5. Connect the power adapter to the Router.

6. After the cable or DSL modem and the Router are turned on, the Router’s

WAN link light should be on. This indicates that the modem and the Router

are connected to each other.

7. Turn on the rest of your computers.

After your computers boot up, a LAN link light (on the front of the Router) will

be on for each port to which a computer is connected. These lights are your

means to verify that your computers are connected to the Router.

Step 3: Configure the Router to your ISP’s settings

1. Using the computer that was originally connected directly to the cable or DSL

modem, launch your browser. Note: You can access the setup utility from any

computer on the network, however, use the original computer for this procedure at

this time.

2. In the address bar, type the following address: 192.168.2.1.The Router login screen

will appear. Enter "Admin" in the User Name field, and do not enter anything in the

"Password" field. Click "OK".

3. The Router’s status page will appear.

4. Click on "Initial Setup" in the top left-hand corner. The following page will appear.

Step : Configuring TCP/IP for dynamic IP configuration

Your computer will communicate with the Router through TCP/IP. To configure

your Mac computer’s TCP/IP settings to communicate with the Router, follow the

steps below.

1. Pull down the “Apple” menu. Select "Control Panels" and select "TCP/IP".

2. At "ConnectVia:", choose either "Ethernet Built In" or "Ethernet" based on your

Mac computer’s interface.

3. At "Configure:" choose "Using DHCP Server".This will tell the computer to obtain

an IP address from the Router.

4. Close the window.The following window will appear. Click "Save".

5. Restart the computer.

You are now finished with dynamic IP configuration. Perform this operation for each

computer that you will be connecting to the Router.

When finished configuring yourTCP/IP settings, you need to start File Sharing to enable.

Autres manuels pour F5D6230-3

Ce manuel convient aux modèles suivants

Autres manuels Belkin Routeur réseau

Belkin

Belkin OmniView 5000HQ Manuel utilisateur

Belkin

Belkin Next Net Series Manuel utilisateur

Belkin

Belkin Wireless Router F5D7234-4-H Manuel utilisateur

Belkin

Belkin F5D5230-F Manuel utilisateur

Belkin

Belkin BLKF9K1002 Manuel utilisateur

Belkin

Belkin TSG-UK-1-001 Guide de référence

Belkin

Belkin F5D7230 Guide de référence

Belkin

Belkin AX3200 Manuel utilisateur

Belkin

Belkin AC1800 DB Manuel utilisateur

Belkin

Belkin F9K1002V1 Manuel utilisateur

Belkin

Belkin SURF N300 Manuel utilisateur

Belkin

Belkin Wireless Gplus Notebook Card Manuel utilisateur

Belkin

Belkin F5D7230au4 Instructions d'utilisation et d'installation

Belkin

Belkin F5D8232-4 Manuel utilisateur

Belkin

Belkin Basic Manuel utilisateur

Belkin

Belkin INVENTEL CONFIG XP Instructions de montage

Belkin

Belkin F5D7330 Manuel utilisateur

Belkin

Belkin F1P1210ENAU Guide de référence

Belkin

Belkin F5D8233 Manuel utilisateur

Belkin

Belkin F9K1105V2 Manuel utilisateur

Belkin

Belkin AC1800 DB Manuel utilisateur

Belkin

Belkin N Wireless Manuel utilisateur

Belkin

Belkin F9K1001V1 Manuel utilisateur

Belkin

Belkin F5D8236V3 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité