Belimo Clear Edge EAP005 Manuel utilisateur

INSTALLATION INSTRUCTIONS

Belimo Clear Edge Device

70730-00001.A

03/19 - Subject to change. © Belimo Aircontrols (USA), Inc.

INSTALLATION / MOUNTING

Front View

Side View

Rear View

Wall Mounted Option

Step 1. Mark and prep holes on surface for mounting

Step 2. Attach mounting bracket to chassis

Step 3. Fasten system to surface

DIN Rail Option

Step 1. Attach DIN rail mounting brackets to chassis

Step 2. Clip system to DIN rail

Power Connection

Connect supplied 12 VDC power adapter to approved power source.

GENERAL WARNINGS

1. Do not open or modify the device. The device uses components

that comply with FCC and CE regulations. Modication of the

device will void these certications.

2. Install the device securely. Be careful handling the device to

prevent injury and do not drop.

3. Wall or ceiling mounting device requires use of a mounting plate or

bracket. Plate or bracket must be of metal construction and have a

minimum thickness of 1mm.

4. Use M3x0.5mm Flat Head screws to attach mounting plate or

mounting brackets to threaded holes on bottom of chassis. Screws

should be minimum length of 4mm. Add 1mm of screw length

for every mm of additional thickness of plate or bracket beyond

1.5mm.

5. Operational temperature must be between 32°F-122°F

[0°C-50°C] with a non-condensing relative humidity of 10-90%.

6. The device can be stored at temperatures between 32°F-122°F

[0°C-60°C].

7. Keep the device away from liquids and flammable materials.

8. Do not clean the device with liquids. The chassis can be cleaned

with a cloth.

9. Allow at least 2 inches of space around all sides of the device for

proper cooling.

Belimo Clear Edge

Quick Start Guide

Quick Start instructions are intended for users that are connecting to the

Belimo Clear Edge.

Supported Hardware

– EAP005, EAP020, EAP050

Default IP Settings

– Port 1: (Congurable)

– IP Address: DHCP

– Port 2: (Service Port)

– IP Address: 100.100.1.100

– Subnet: 255.255.255.0

Default Credentials

– Administrator:

– Username: admin

– Password: Admin

– Operator:

– Username: belimo

– Password: Belimo

Application Details

The default application installed will follow a consistent naming pattern for

uniqueness. This naming convention is as follows: belimoEv<serialNumber>

The UI will display as BelimoEv without the serial number.

Changing IP Settings

1. Plug a network cable from a computer to the Service Port of the device.

Change computer network settings as appropriate to access the

application in a web browser on the IP address provided above.

2. Log in using the admin user.

3. Click the BelimoEv project, then select the IP Cong App.

Port 1

Port 2

Belimo Clear Edge

4. Change the IP settings for Port 1 as required and click submit.

5. Plug the device into the building’s network on Port 1.

Energy Valve Pod Introduction

Your Automated Energy Valve Application includes two Apps.

1. EnergyValveCong – Provides conguration, settings for the installer or

provider.

2. EnergyValve – Provides visualizations for the end-user.

Access to each App can be congured independently through the Host > User

View.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Belimo Unité de contrôle

Belimo

Belimo EPF+MP Series Mode d’emploi

Belimo

Belimo F6 Series Manuel utilisateur

Belimo

Belimo 6-Way ePIV Manuel utilisateur

Belimo

Belimo EPIV Series Guide produit

Belimo

Belimo UGVL Series Manuel utilisateur

Belimo

Belimo ENYE CONTROLS H2 S Series Manuel utilisateur

Belimo

Belimo Z2050QS-J Manuel utilisateur

Belimo

Belimo F6 HS Series Manuel utilisateur

Belimo

Belimo Z2050Q-J Manuel utilisateur

Belimo

Belimo EFB Series Guide de référence

Belimo

Belimo B2100VB-024 Mode d’emploi

Belimo

Belimo FS Series Manuel utilisateur

Belimo

Belimo F6 Series Manuel utilisateur

Belimo

Belimo L Series Manuel utilisateur

Belimo

Belimo BKS24-1B Guide de démarrage rapide

Belimo

Belimo Z2075Q-K Manuel utilisateur

Belimo

Belimo ZoneTight Z2050Q-F Manuel utilisateur

Belimo

Belimo VRU-M1R-BAC Mode d’emploi

Belimo

Belimo SHP Series Mode d'emploi

Belimo

Belimo GVA-CPL Manuel utilisateur

Belimo

Belimo NMV-D2M Manuel utilisateur

Belimo

Belimo H650SP Mode d’emploi

Belimo

Belimo Energy Valve EV015R+BAC Manuel d'instructions

Belimo

Belimo Z2050QPT-D Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur