Beats BeatsX Manuel utilisateur
Set up and use your BeatsX earphones
Here's everything you need to know to make the most of your BeatsXearphones.
Turn on
The power button is on the cable beneath the right earphone. Press and hold the button
for 1 second to turn your earphones on or off.
Set up
If the indicator light on your earphones turns on but doesn't flash, your earphones have
already been set up with a device. In that case, follow the steps to connect to a different
device.
If you have an iPhone with iOS 10, follow these steps. When you set up your earphones
in this way, they also set up automatically with any of your other supported devices that
are signed in to iCloud and using iOS 10, macOS Sierra, or watchOS 3.
1. Hold your earphones next to your unlocked iPhone.
2. Press the power button on your earphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the
power button on your earphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have some other Bluetooth device, follow these steps to pair your earphones with
that device:
5. Press the power button for 5 seconds. When the indicator light flashes, your
earphones are discoverable.
6. Go to Bluetooth settings on your device.
7. Select your earphones from the list of discovered Bluetooth devices.
Connect to a different device
Your earphones automatically reconnect to the last device you used with them. To
connect to a different device, follow these steps.
iPhone, iPad, or iPod touch using iOS 10:
8. Open Control Center by swiping up from the bottom edge of the screen.
9. Swipe to the side in Control Center to show the Now Playing card.
10. Tap the device name on the bottom of the card, then choose your earphones from
the list of playback devices. If you don't see your earphones, follow the steps for
all other devices, below.
All other devices:
11. Go to Bluetooth settings on your device. On your Mac, you can just click the
Bluetooth icon in the menu bar.
12. Select your earphones from the list of Bluetooth devices. If you don't see your
earphones after a few seconds, press and hold the power button for 5 seconds.
Charge
Plug your earphones into a power source using the included Lightning cable. Your
earphones provide up to 8 hours of playback from a full charge, and up to 2 hours of
playback from 5-minute charge.
When your earphones are turned on and set up, the LED indicator light on the power
button shows how much listening time is left:
oWhite: Up to 8 hours left
oRed: Less than an hour left
oBlinking red: Needs to charge
Control
To control audio playback, use the center button on the RemoteTalk cable:
oPress once to play or pause audio playback.
oPress twice to skip to the next track. Press three times to skip backward.
oPress twice and hold on the second press to scan forward through a track. Press
three times and hold on the third press to scan backward through a track.
To control playback volume, use the volume buttons on the RemoteTalk cable. To
control call volume, use the volume controls on your phone.
oPress and release the volume up button, or press and hold to increase volume
continuously
oPress and release the volume down button, or press and hold to decrease volume
continuously.
To control phone calls, use the center button on the RemoteTalk cable:
oPress once to answer or end a call.
oPress once to answer a second incoming call and put the first call on hold. When
two calls are active, this switches between calls.
oPress and hold for about a second to reject an incoming call.
oPress twice to stop listening through your earphones and send the call to the
phone.
To activate Siri on your iOS device or the voice-command feature on another device,
press and hold the center button on the RemoteTalk cable until you hear a chime, then
say what you need.
Reset
25. Hold down these two buttons for 10 seconds:
Power button
Volume down button
26. When the LED indicator light flashes, release the buttons. Your earphones are
now reset and ready to be set up with your devices again.
Update
Your earphones are automatically kept up to date when they're set up with an iPhone
using iOS 10.
Eartip basics
Eartips go in your ears, so you’ll want to treat them right. Here’s the protocol:
1.
Selecting the right size
Remember—one size does not fit all. Beats earphones come with several sets of eartips,
so try them all to find the pair that fits most comfortably.
2.
Insertion and removal
1. Pull back on your ear to straighten the canal.
2. Insert the eartip securely, so that it’s firmly in place.
3. To remove, twist the earphone gently to break the seal in your ear.
3.
Cleaning
1. Always remove the eartip from the earpiece before cleaning. Failure to do this
may result in damage to the earphones.
2. Use warm water and mild soap on a damp cloth to remove dirt and earwax from
the eartips. Don’t use harsh cleaning products.
3. Rinse completely and dry before placing them back on your earphones.
4. Gently push the eartips back onto the eartubes.
Noise canceling vs. noise isolating
Passive noise isolation, active noise cancelation, and Pure ANC work in different ways to block
ambient noise.
Passive noise isolation
Noise isolating earphones and headphones inherently block out ambient noise without
batteries. Adjustable-fit eartips on earphones and extra earcup padding on headphones act
as physical barriers to keep unwanted noise from reaching your ears. These barriers also
help prevent people around you from hearing your music.
Active noise cancelation
For additional noise cancelation beyond passive noise isolation, internal and external
microphones in the headphone measure unwanted ambient noises, then circuitry in the
headphones generate sound at a frequency that cancels out those noises. Active noise
cancelation works whenever headphones with this feature are turned on.
Pure ANC (Pure Adaptive Noise Cancelation)
Pure ANC is a form of noise cancelation that uses advanced algorithms to monitor the
sounds around you and adjust the level of noise cancelation to best match your
environment. Pure ANC also evaluates fit and adjusts for leakage caused by hair, glasses,
the shape of your ear, and movement of your head as you go about the day. Additionally,
Pure ANC simultaneously checks what you’re hearing while noise canceling is applied
against the original music content to adjust and ensure optimal audio fidelity.
You can turn Pure ANC off if you want to use your headphones in low-power mode
without sacrificing audio quality.
Product compatibility
Beats are made to work with most devices. However, functionality may vary by product.
Earphones and Headphones
Using a 3.5 mm cable
oFully compatible
Using a Lightning cable
oCompatible with Apple iOS devices that have a Lightning connector and iOS 10
or later
Using the built-in remote/mic
oCompatible with Apple iOS devices but varies with other brands or products
Speakers
Using Auxiliary or Line Out
oFully compatible with any audio device with a 3.5 mm port
Over Bluetooth
oCompatible with all Bluetooth-enabled devices
Table des matières
Autres manuels Beats Casque audio
Beats
Beats powerbeats2 wireless Manuel utilisateur
Beats
Beats Solo 2 Manuel utilisateur
Beats
Beats Beats Studio Manuel utilisateur
Beats
Beats Solo2 Manuel utilisateur
Beats
Beats Beats Solo3 Wireless Manuel utilisateur
Beats
Beats Solo Pro Manuel utilisateur
Beats
Beats In-Ear Headphones Manuel utilisateur
Beats
Beats Solo2 Manuel utilisateur
Beats
Beats powerbeats2 wireless Manuel utilisateur
Beats
Beats Solo HD Manuel utilisateur
Beats
Beats Solo 2 Manuel utilisateur
Beats
Beats Flex Manuel
Beats
Beats Wireless Manuel utilisateur
Beats
Beats MH BTS ON SOHD BK CT EU Manuel utilisateur
Beats
Beats Headphones Manuel utilisateur
Beats
Beats Headphones Manuel utilisateur
Beats
Beats X Manuel utilisateur
Beats
Beats Beats Studio Manuel utilisateur
Beats
Beats Solo 2 Manuel utilisateur
Beats
Beats Beats Solo3 Wireless Manuel utilisateur
