BCM Advanced Research RX110H Manuel utilisateur

RX110H

Intel® Sky Lake (6th gen i7/i5/i3)/

Kaby Lake (7th gen i7/i5/i3)

Micro-ATX Mainboard

BCM P/N: 71172 ONLY

User’s Manual

Edition 1.00 – Feb, 2017

FCC Statement

THIS DEVICE SUPPORTS PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE,

PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE

EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL,

MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH

CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time. For detailed

information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

BCM Advanced Research reserves the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve design and/or

performance. BCM Advanced Research assumes no responsibility or liability for the use of the described

product(s), conveys no license or title under any patent, copyright, or masks work rights to these products,

and makes no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this manual are for

illustration purposes only. BCM Advanced Research makes no representation or warranty that such

application will be suitable for the specified use without further testing or modification.

Life Support Policy

BCM Advanced Research PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF BCM Advanced

Research.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with

instructions for use provided in the labeling, can be reasonably expected to result in significant injury to

the user.

2. A critical component is any component of a life support device or system whose failure to perform can

be reasonably expected to cause the failure of the life support device or system, or to affect its safety

or effectiveness.

A Message to the Customer

BCM Customer Services

Each and every BCM product is built to the most exacting specifications to ensure reliable performance in

the harsh and demanding conditions typical of industrial environments. Whether your new BCM device is

destined for the laboratory or the factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name BCM has come to be known.

Your satisfaction is our primary concern. Here is a guide to BCM customer services. To ensure you get the

full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into technical difficulties,

we are here to help. For the most frequently asked questions, you can easily find answers in your product

documentation. These answers are normally a lot more detailed than the ones we can give over the phone.

So please consult the user’s manual first.

To receive the latest version of the user’s manual and drivers; please visit our Web site at:

http://www.bcmcom.com.

If you still cannot find the answer, gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the

support you need to get the most from your BCM products. In fact, most problems reported are minor and

are able to be easily solved over the phone.

In addition, free technical support is available from BCM engineers every business day. We are always

ready to give advice on application requirements or specific information on the installation and operation of

any of our products. Please do not hesitate to call or e-mail us.

BCM Advanced Research

11 Chrysler,

Irvine, California, 92618

USA

Tel : +1-949-470-1888

Fax : +1-949-470-0971

http://www.bcmcom.com

E-mail: [email protected]

Product Warranty

BCM warrants to you, the original purchaser, that each of its products will be free from defects in materials

and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than

repair personnel authorized by BCM, or which have been subject to misuse, abuse, accident or improper

installation. BCM assumes no liability under the terms of this warranty as a consequence of such events.

Because of BCM high quality-control standards and rigorous testing, most of our customers never need to

use our repair service. If any of BCM products is defective, it will be repaired or replaced at no charge

during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of

replacement materials, service time, and freight. Please consult your dealer for more details. If you think

you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type and speed, BCM

products model name, hardware & BIOS revision number, other hardware and software used, etc.)

Note anything abnormal and list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any helpful

information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization) number from

your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card and a

photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for warranty service.

Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

Manual Objectives

This manual describes in detail the BCM RX110H mainboard.

We strongly recommend that you study this manual carefully before attempting to interface with the

motherboard or change the standard configurations. Whilst all the necessary information is available in this

manual we would recommend that unless you are confident, you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that make booting

impossible. If this should happen, clear the CMOS settings, (see the description of the Jumper Settings for

details).

If you have any suggestions or find any errors concerning this manual and want to inform us of these,

please contact our Customer Service department with the relevant details.

Safety Precautions

Warning!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on. Sensitive

electronic components can be damaged by sudden power surges. Only

experienced electronics personnel should open the PC chassis.

Caution!

Always ground yourself to remove any static charge before touching the

mainboard. Modern electronic devices are very sensitive to static electric charges.

As a safety precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are not

in the chassis.

Document Amendment History

Revision Date Comment

1st (1.00) Feb, 2017 Initial Release

Contents

Chapter 1: System Setup ..............................................................................................12

1.1 Welcome!........................................................................................................................................12

1.2 Packing Contents ...........................................................................................................................12

1.3 Special Features.............................................................................................................................13

1.3.1 Product Highlights ..........................................................................................................................13

1.4 Before you proceed........................................................................................................................14

1.5 Mainboard Overview.......................................................................................................................15

1.5.1 Mounting Holes...............................................................................................................................15

1.5.2 Onboard LEDs................................................................................................................................16

1.5.3 Mainboard Layout...........................................................................................................................17

1.5.4 Layout Content List.........................................................................................................................18

1.5.4.1 Slots................................................................................................................................................18

1.5.4.2 Internal Jumpers.............................................................................................................................18

1.5.4.3 Internal Headers.............................................................................................................................19

1.5.4.4 Back Panel Connectors..................................................................................................................20

1.6 System Memroy..............................................................................................................................21

1.6.1 Overview.........................................................................................................................................21

1.6.2 Memory Configurations ..................................................................................................................21

1.6.3 Installing the DDR4 DIMM..............................................................................................................22

1.6.4 Removing the DDR4 DIMM.........................................................................................23

1.7 Power Supply..................................................................................................................................24

1.7.1 ATX Power Connectors: ATXPWR1, ATX12V1..............................................................................24

1.8 Back Panel......................................................................................................................................25

1.8.1 Back Panel Connectors..................................................................................................................25

1.9 Connectors/Headers.......................................................................................................................27

1.9.1 USB3.0 Header: USB3_3_4...........................................................................................................27

1.9.2 Serial ATA 3.0 Connectors: SATA3_1, SATA3_2, SATA3_3, SATA3_4.......................................27

1.9.3 Digital Input/ Output Header: JGPIO1............................................................................................28

1.9.4 CPU & System Fan Connectors: CPU_FAN1, CHA_FAN1, CHA_FAN2......................................29

1.9.5 External Buzzer Connector: BUZZ2...............................................................................................30

1.9.6 System Panel Header: PANEL1.....................................................................................................30

1.9.7 Chassis Intrusion Headers: CI1, CI2..............................................................................................31

1.9.8 USB2.0 Headers: USB2_0_1, USB2_2_3......................................................................................31

1.9.9 COM2, COM3, COM4, COM5, COM6 Headers (RS232 ONLY): COM2, COM3, COM4, COM5,

COM6 .............................................................................................................................................32

1.9.10 LPT Port Header: LPT1..................................................................................................................32

1.9.11 3W Audio AMP Output: SPEAKER1 ..............................................................................................33

1.9.12 Front Panel Audio Header: HD_AUDIO1.......................................................................................34

1.10 Jumpers..........................................................................................................................................35

1.10.1 COM1 Pin#9 Power Setting Jumper: PWR_COM1........................................................................35

1.10.2 Rear I/O USB Ports Power Setting Jumpers: USB2_PWR1 (For USB2.0 Port "USB2_89"),

USB3_PWR1 (For USB3.0 Port "USB3_45").................................................................................35

1.10.3 USB Power Setting Jumper for USB3.0 Header "USB3_3_4": USB3_PWR2...............................36

1.10.4 GPIO Input/ Output Power Select: JGPIO_PWR1.........................................................................36

1.10.5 GPIO Signals Pull-High/ Pull-Low Selection: JGPIO_SET1 ..........................................................37

1.10.6 Clear CMOS Header: CLRMOS1...................................................................................................38

1.10.7 USB Ports Power Settings Jumpers: USB2_PWR2 (For USB2.0 Port "USB2_0_1"), .....................

USB2_PWR3 (For USB2.0 Port "USB2_2_3")...............................................................................39

1.10.8 ATX/ AT Mode Select: PWR_JP1 ..................................................................................................39

1.10.9 COM2/3/4/5/6 Pin#9 Power Setting Jumper: PWR_COM2, PWR_COM3, PWER_COM4,

PWR_COM5, PWR_COM6............................................................................................................40

1.11 The Expansion Slots.......................................................................................................................41

1.11.1 Installation of Expansion Card........................................................................................................41

1.11.2 Setup An Expansion Card..............................................................................................................41

Chapter 2: Starting Up the System .............................................................................42

2.1 Starting Up Your System.................................................................................................................42

Chapter 3: BIOS Setup ..................................................................................................44

3.1 BIOS Falsh Related Procedure......................................................................................................44

3.2 Introducing BIOS ............................................................................................................................44

3.3 Entering BIOS Setup Menu............................................................................................................45

3.4 Getting Help....................................................................................................................................45

3.4.1 UEFI Menu Bar...............................................................................................................................46

3.4.2 Navigation Keys..............................................................................................................................46

3.5 Main Screen....................................................................................................................................47

3.6 Advanced Screen ...........................................................................................................................48

3.6.1 CPU Configuration..........................................................................................................................49

3.6.2 Chipset Configuration.....................................................................................................................52

3.6.3 Storage Configuration.....................................................................................................................54

3.6.4 Super IO Configuration...................................................................................................................55

3.6.5 ACPI Configuration.........................................................................................................................57

3.6.6 USB Configuration..........................................................................................................................59

3.6.7 Trusted Computing.........................................................................................................................60

3.7 Hardware Health Event Monitoring Screen....................................................................................61

3.8 Security Screen ..............................................................................................................................63

3.9 Boot Screen....................................................................................................................................64

3.9.1 CSM (Compatibility Support Module).............................................................................................65

3.10 Exit Screen .....................................................................................................................................67

Chapter 4: Application Note..........................................................................................68

Mainboard Specifications

Model RX110H

Processor Intel® 6th Generation LGA1151 core i3, Core i5, Core i7 (Sky Lake)

Intel® 7th Generation LGA1151 core i3, Core i5, Core i7 (Kaby Lake)

Note: BCM P/N: 71172 ONLY

Chipset Intel® H110

Memory 2 x 288Pin DIMM sockets support Non-ECC, Un-buffered DDR4 memory module

(PC4-17000) 2133 MHz up to 32GB (16GB maximum/slot)

Display Intel® Integrated Graphic (CPU Dependent)

1 x DVI-D port

2 x Display port

SATA 4 x SATA III connectors

Expansion Slots 1x PCIe x16 Slot

3x PCIe x1 Slot

USB 6 x USB 2.0 ports (4 @ 2x Header, 2 @ Rear I/O)

4 x USB 3.0 ports (2 @ 1x Header, 2 @ Rear I/O)

Super I/O Controller Nuvoton® NCT6106D

Serial Ports 1 x RS232/RS422/RS485 port (Rear I/O, Selectable through BIOS, with 5V/12V/RI

selection jumper, )

5 x RS232 Ports (Header, with 5V/12V/RI selection jumper)

LPT 1 x LPT header

Watch Dog Timer 1 ~ 255 sec timer

HW Monitor Yes

Audio Realtek® ALC887

LAN 1 x 10/100/1000 LAN (Intel® i219-V PHY Gigabit LAN)

1 x 10/100/1000 LAN (Intel® i211-AT PCIe Gigabit LAN)

DIO 8 Bit

BIOS

AMI® UEFI BIOS

AMI BIOS with 16MB (128Mbit) SPI ROM

Onboard I/O Headers

SATA 4 x Std. SATA III Connectors

USB 2 x USB2.0 Headers (2 ports on each header)

1 x USB3.0 Header (2 ports on each header)

Autres manuels pour RX110H

Table des matières

Autres manuels BCM Advanced Research Carte mère

BCM Advanced Research

BCM Advanced Research FX815ELT Manuel utilisateur

BCM Advanced Research

BCM Advanced Research RX965QV Manuel utilisateur

BCM Advanced Research

BCM Advanced Research BC77Q Manuel utilisateur

BCM Advanced Research

BCM Advanced Research BC77Q Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX45GM2 Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX855 Manuel utilisateur

BCM Advanced Research

BCM Advanced Research Advanced Socket 370 Manuel utilisateur

BCM Advanced Research

BCM Advanced Research BC370Q Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX110HD Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX67QMD Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX110H Manuel utilisateur

BCM Advanced Research

BCM Advanced Research ECM-APL Manuel utilisateur

BCM Advanced Research

BCM Advanced Research RX110H Manuel utilisateur

BCM Advanced Research

BCM Advanced Research NX530Z Manuel utilisateur

BCM Advanced Research

BCM Advanced Research ECM-3455J Manuel utilisateur

BCM Advanced Research

BCM Advanced Research IN440EX Manuel utilisateur

BCM Advanced Research

BCM Advanced Research SQ596 Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX370QD Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX6210N Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX3965U Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX3150N Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX4305UE Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX855EC10 Series Manuel utilisateur

BCM Advanced Research

BCM Advanced Research MX310HD Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur