BCF Solutions Easi-Scan:Go Manuel utilisateur

Your animal imaging partner

Instruction manual

Contents

Introduction 3

Scanner menu 4

LED sequence 6

BCF Go Scan App 8

Usage les 10

Factory reset 10

Measurements menu 13

Care & maintenance 17

Certication

BCF Technology Ltd., hereby declares that the radio equipment type that we use on Easi-Scan:Go

is in compliance with all CE Directives. The full text of the EU declaration of conformity is

available at the following internet address: www.bcftechnology.co.uk

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

If the user changes any modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note: All BCF Technology products are for animal applications only.

1 Scanner menu

1.1 Adjusting gain and depth using scanner´s buttons

Once the gain or depth is visible, pressing the “Power Button” will select that settings. Use The

Up and Down buttons to adjust the selected settings.

Power button

• To switch on/off the

scanner press and hold

until it beeps.

• If no viewing devices are

connected, double press

to change Wi-Fi channel.

• Short press to freeze the

image.

Up button

• Adjust gain.

• Save videos.

Down button

• Adjust depth.

• Save images.

Pressing “Down” button will bring up depth

menu.

In live scanning pressing “Up” button will bring

up the gain menu.

Once the desired option is visible, pressing the Power Button will select that option.

Note: The scanner will store the last 300 frame (10-12.5 seconds depending on the selected scan

depth) in its internal memory.

To store on the scanner, the scanner must be Frozen.

During save,

particularly cine save, the app will pause while downloading and saving the data while scanning.

It is recommended that you save images and videos directly from the app where possible.

2 LED sequence

Freeze the image using “Power button”

Press “Down” will bring up “Save Image”.

Freeze the image using “Power button”

Press “Up” will bring up “Save Cine”.

1.2 Saving images and videos using scanner´s buttons

Power

LED

Wireless

LED

Power LED

Blue

ﬂashing

Scanner turning on

Blue Scanner on and battery

between 66–100% charge

Yellow Scanner on and battery

between 33–66% charge

Yellow

ﬂashing

Scanner on and battery

between 0–33% charge

Wireless LED

Blue

ﬂashing

Scanner ready for smart

device to connect, nothing

connected

Blue Smart device connected

Blue Scanner is charging

when placed on wireless

charging plate

Both LEDs

Flashing

yellow

Software updating

3.2 Normal start up process

1. Press “Power

button” to

switch on the

scanner. Open

app on the smart

device. The app

will request to

connect to the

scanner. Click

OK.

3 App requests

to connect to

the internet.

Click OK.

4. Select your

local Wi-Fi

network to

connect to the

internet.

5. App requests

to connect back

to the scanner

and retrieves

the licence

from BCF’s

licence server.

2. Select

EASISCAN

from the Wi-Fi

page and

return to the

app.

The app will

get serial

number from

the scanner.

6. Select your

EASISCAN from

the Wi-Fi page and

return to the app.

3 Activation

3.1 First time use

Download the BCF Go Scan app from Google Play or the App store.

To activate the scanner, ensure that the scanner is charged and that you have a local Wi-Fi

internet connection. This is only necessary the ﬁrst time you connect the scanner.

Note – if the LED ﬂashes on the scanner it is not connected to any smart device.

After a few seconds, the ultrasound image will appear. Touchanywhere on the screen to bring up

the live scanning menu.

1. Switch on the

scanner and wait

until the Wi-Fi

LED illuminates.

Launch BCF Go

App. App requests

to connect to

scanner.

2. Select your

EASISCAN

from the Wi-Fi

page. Return

to the App.

3.It can take up

to 10 seconds

to connect and

start receiving

ultrasound. You

are now ready

to scan.

4 BCF Go Scan App

4.1 Live scanning

Recording

indicator

and elapsed

time during

recording.

Wi-Fi channel quality*

(only on Android devices)

The scanner battery

level

The smart device

battery level

No probe contact,

scanner enters

low-power

mode and the

screen will dim.

Touching the scanner with one ﬁnger will open

the main menu.

Touching the screen with two ﬁngers

simultaneously will freeze the image.

*Change the channel in Wi-Fi settings. No indicator -clear channel in the 5GHz band. This is

recommended state. White indicator-clear channel, but is on 2.4GHz band. It is more prone to

interference. Orange/red indicator-channel with other networks or scanner. This is likely to cause

interference issues.

Unfreeze and return

to live scanning.

Callipers to measure

size of the embryo Draw annotations on

the image

4.2.1 Freeze menu

Cattle

Sheep

Go to cine mode

Save image on

smart device

Start recording

Freeze ultrasound

Open Settings

Adjust gain

4.2 Main menu

Adjust

scanning depth

Callipers

Reset the cursors to

the initial positon.

Save images to the

camera folder on a

smart device.

Return to freeze

menu.

Note: Use your ﬁnger to move crosses.

Cattle

Crown rump length

Head diameter

Trunk diameter

Eye diameter

Head length

Sheep

Head diameter

Trunk diameter

(width of the ribcage at the widest part)

Head diameter

(width of the skull at the widest point)

14mm – 101mm, 49 – 126 days19mm – 66mm, 48 - 121 days

Gestational measurements available:

Trunk diameter

(width of the

ribcage at the

widest part)

14mm – 123mm,

53 – 133 days

Eye diameter

(diameter of

the eye socket)

3mm – 28mm,

62 – 241 days

Head diameter,

(width of the

skull at the

widest point)

14mm – 86mm,

55 - 135 days

Crown-

Rump length

(distance from

the top of the

skull to the end

of the body)

14mm – 180mm,

33 – 76 days

Head length

(distance from

the top of the

skull to the end

of the nose)

21mm – 146mm,

56 – 134 days

Gestational measurements available:

Freedraw

Touch and drag to draw on screen, can be used to make simple annotations or to highlight areas

of interest. Any measurements placed on screen remain visible.

Cine mode

The app automatically stores the last 300 ultrasound frames (approximately 10 seconds), in cine

mode. These frames can be viewed individually or as a video, individual frames can be saved as

still images or the entire loop as in copy.

Reset button, deletes all

drawn lines.

Save button, save the

current image to the

camera folder.

Back button, return to

freeze menu.

Frame back

Frame forward

Back

Save image

Save cine

Play

Frame slider

Table des matières

Manuels Produits de soins pour animaux de compagnie populaires d'autres marques

Schwinn

Schwinn Rascal Manuel utilisateur

K&H

K&H Small Animal Manuel utilisateur

SHOR-LINE

SHOR-LINE 006.3230.00 Manuel utilisateur

Petsafe

Petsafe Stubborn Dog Receiver Collar Manuel utilisateur

Datamars

Datamars OMNI MAX Manuel utilisateur

Trixie

Trixie 24444 Manuel utilisateur

Roverpet

Roverpet 30DDPP Manuel utilisateur

SportDOG

SportDOG SD-105S-C Manuel utilisateur

Staywell

Staywell 400 Series Magnetic Manuel utilisateur

Dogtek

Dogtek Sonic Birdhouse Manuel utilisateur

Togfit

Togfit Deluxe Trigger Lock Door Gate Manuel utilisateur

Girafus

Girafus 227PA Manuel utilisateur

ubbink

ubbink KoiFeeder Solar Manuel utilisateur

ULTRACOM

ULTRACOM KOIRA-GPS Manuel utilisateur

CADOCA

CADOCA Deuba 106911 Manuel utilisateur

Dogtra

Dogtra RR Deluxe Manuel utilisateur

Carson

Carson CONVERTIBLE PET YARD 2200 Manuel utilisateur

Creative Cedar Designs

Creative Cedar Designs K-9 Kabin Manuel utilisateur