BayTech DS2-RPC Manuel utilisateur

OWNER'S MANUAL

________________

DS-RPC

DATA SWITCH/POWER CONTROL

FOR MODELS

DS2-RPC

DS4-RPC

Including the

DS71

DS71-MD2

DS74 &

DS73

Modules

BayTech Manual Publication #U140A124-01

August 1998

BayTech, Telplex, LaserShare, Print Master and TRAN-X are

registered trademarks of Bay Technical Associates, Inc.

IBM, IBM PC, IBM PC/AT, IBM PC/XT are products and registered

trademarks of International Business Machines Corporation.

Hewlett-Packard LaserJet is a product and registered trademark of the

Hewlett-Packard Company.

PROCOMM PLUS is a product and registered trademark of Datastorm

Technologies, Inc.

Windows 95



is a product and registered trademark of Microsoft

Corporation.

DS-RPC OWNER’S MANUAL

ABOUT THIS OWNER’S MANUAL

__________________________________________________________________________________________

iii

ABOUT THIS OWNER’S MANUAL

This document provides information required for installing and operating

your Bay Tech equipment. It should allow the user to connect, power up,

and access an applications menu where peripheral equipment can be

controlled. We recommend reading this manual carefully, while placing

special emphasis on correct cabling and configuration. If you have any

problems with your installation, please contact a BayTech Applications

Engineer at 228-467-8231, call toll free from anywhere in the United

States using 1-800-523-2702 or contact us at our Web Site,

www.baytechdcd.com.

BayTech manufactures many remote site management products, data

switches, data collection multiplexers, remote power controllers, and

peripheral print sharers. If you would like information on any of these

products, please contact BayTech Customer Service at the numbers

previously listed.

Conventions used in this manual include:

CAUTION: This term is used to denote any condition that could

possibly result in physical harm to personnel or damage to

equipment.

IMPORTANT: This term is used to denote conditions that could

result in the loss of communications or to highlight the proper

functioning of equipment.

NOTE: This term is used to denote items of interest to the user.

<cr>: Carriage Return or ENTER

DS-RPC OWNER’S MANUAL

ABOUT THIS OWNER’S MANUAL

__________________________________________________________________________________________

The information in this document is subject to change without notice. The

statements, configurations, technical data, and recommendations in this

document are believed to be accurate and reliable, but are presented

without express or implied warranty. Users must take full responsibility

for their applications of any products specified in this document. The

information in this document is proprietary to Bay Technical Associates,

Inc.

In the interest of improving internal design, operational function, and/or

reliability, Bay Technical Associates, Inc reserves the right to make

changes to the products described in this document without notice.

Bay Technical Associates, Inc does not assume any liability that may

occur due to the use or application of the product(s) or circuit layout(s)

described herein.

This manual replaces BayTech Publication U140A124.

We welcome any comments you may have about our products, and we

hope that you will continue to look to BayTech for your data

communication needs.

DS-RPC OWNER’S MANUAL

TABLE OF CONTENTS

__________________________________________________________________________________________

ABOUT THIS OWNER’S MANUAL iii

INTRODUCTION TO THE DS-RPC 1

PROGRAMMABLE FEATURES OF THE DS MODULES 3

DS-RPC QUICK START 6

EIA-232 SERIAL CONNECTION 6

OPERATION 6

DS-RPC CONFIGURATION 8

INSTALLATION 10

UNPACKING 10

PREPARING THE INSTALLATION SITE 11

POWER 11

POWER ON/OFF STATE 12

POWER UP SEQUENCE 12

CIRCUIT BREAKER 12

CABLING 13

RJ-45 CABLES AND ADAPTERS 13

MODEM CONNECTIONS 16

DETAILED OPERATION AND CONFIGURATION 18

CONNECTING TO THE DS-SERIES 18

EIA-232 SERIAL CONNECTION 18

INTERNAL MODEM CONNECTION DS71-MD2 (ONLY) 19

EXTERNAL MODEM CONNECTION 19

10BASE-T NETWORK PORT CONNECTION 20

OPERATION 21

ACCESSING MAIN MENU 21

SELECTING A DEVICE 23

PPP DIAL-UP CONNECTION 25

CONFIGURATION 26

DS71 OR DS71-MD2 CONFIGURATION 26

STATUS 27

SERIAL PORT CONFIGURATION 28

DS71 29

DS-RPC OWNER’S MANUAL

TABLE OF CONTENTS

__________________________________________________________________________________________

DS71-MD2 31

PORT DEVICE NAME 34

PORT SELECT CODE 35

ATTENTION CHARACTER 36

DISCONNECT TIME GUARD 37

CONNECT PORT ID ECHO 38

HEADER 39

PASSWORD 40

MENU 41

AUTO CONNECT PORT 42

DCD LOGON/LOGOFF (DS71 ONLY) 44

LOCAL MODEM SETUP (DS71-MD2 ONLY) 45

RINGS TO ANSWER 46

MODEM TO MODEM XON/XOFF 46

CONNECTIVITY TIMEOUT 47

ESCAPE CHARACTER 48

UNIT ID 49

I/O MODULES RESET 49

UNIT RESET 49

MENU DRIVEN SELECTION 50

ACCESS CHARACTER STRING 50

DS74 CONFIGURATION 51

SERIAL PORT CONFIGURATION 52

PORT DEVICE NAME 52

DS73 CONFIGURATION 53

MODULE IP ADDRESS 54

DIAL-UP ADDRESS 55

SUBNET MASK 56

GATEWAY 57

PRIMARY DNS 57

SECONDARY DNS 58

PRIMARY NBNS 59

SECONDARY NBNS 59

USER NAME 60

PASSWORD 60

MODULE NAME 61

RPC OPERATION 62

ACCESSING MAIN MENU 62

CONTROLLING RECEPTACLES 63

RPC CONFIGURATION 64

CHANGE PASSWORD 65

DISABLING A PASSWORD 66

CHANGE OUTLET NAME 66

ENABLE/DISABLE CONFIRMATION 67

ENABLE/DISABLE STATUS MENU 67

DS-RPC OWNER’S MANUAL

TABLE OF CONTENTS

__________________________________________________________________________________________

vii

TECHNICALSUPPORT 69

EQUIPMENT SETUP 70

REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY

FCC RADIO FREQUENCY INTERFACE STATEMENT 72

APPENDIX A – SPECIFICATIONS 74

APPENDIX B – MODEM COMMANDS 76

APPENDIX C – WINDOWS 95 TUTORIAL 78

APPENDIX D – DRAWINGS 81

APPENDIX E –ASCII CHARACTER DEFINITION 85

INDEX 86

DS-RPC OWNER’S MANUAL

INTRODUCTION TO THE DS-RPC

__________________________________________________________________________________________

INTRODUCTION TO THE DS-RPC

BayTech’s DS-RPC provides a single dialup or EIA-232 gateway to

multiple EIA-232 devices. Used for accessing remote equipment or simply

switching between multiple ports, the DS-RPC provides a full duplex

connection between the host and up to 12 peripherals. In a typical

application, the host module connects to a local or remote computer, and

the peripheral port modules connect to devices such as routers, hubs,

servers, and Data Service Units (DSU’s). The DS-RPC is also compatible

with other BayTech products including the Remote Power Control (RPC)

unit.

DS-RPC OWNER’S MANUAL

INTRODUCTION TO THE DS-RPC

__________________________________________________________________________________________

Port selectionis accomplished two different ways.

(1) Use a simple menu-driven selection sequence or

(2) send an ASCII character string to select a port. The DS-RPC

also has four individual relay controlled, 115 VAC power

receptacles. Each receptacle is controlled by sending simple

commands from a local or remote location.

The DS2-RPC base unit consists of two slots for a host communications

module and a peripheral communications module. The DS4-RPC base unit

consists of four slots for a host communications module and up to three

peripheral communications modules. Both control the four power outlets,

LEDs, non-volatile storage, and data flow between connected modules. The

data bus is an internal matrix of high speed serial channels that allows

independent and simultaneous transmissionof data between modules.

The DS71 host communications module is a system data controller that

directs operations between the base unit, system modules, and externally

connected devices. The DS71 provides primary user access for systems

communications. The DS71-MD2 has a high speed EIA-232 port and an

internal modem for remote or local data acquisition and control. The DS74

is a 4-port high speed EIA-232 peripheral communications module that

provides bi-directional communications between the host device and a

selected peripheral device connected to a DS74 port. The DS74 has

selectable serial configurationfor baud rate, word size, stop bits, parity,

DTR, RTS inactive state and XON/XOFF handshaking for each port.

Autres manuels pour DS2-RPC

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BayTech Changer

BayTech

BayTech DS72 Manuel utilisateur

BayTech

BayTech BayTech DS71-MD4 Manuel utilisateur

BayTech

BayTech DS-RPC Manuel utilisateur

BayTech

BayTech DS2-RPC Manuel utilisateur

BayTech

BayTech DS3 Manuel utilisateur

BayTech

BayTech DS73 Manuel utilisateur

BayTech

BayTech ATS Series Manuel utilisateur

BayTech

BayTech MSP Series Manuel utilisateur

BayTech

BayTech BayTech DS62 Manuel utilisateur

BayTech

BayTech BayTech DS62 Manuel utilisateur

BayTech

BayTech MMP Manuel utilisateur

BayTech

BayTech ATS27 Manuel utilisateur

BayTech

BayTech MMPr Manuel utilisateur

BayTech

BayTech BayTech DS71-MD4 Manuel utilisateur

BayTech

BayTech DS Series Manuel utilisateur

BayTech

BayTech V79 PDI-1 Manuel utilisateur

BayTech

BayTech MRPr Manuel utilisateur

BayTech

BayTech DS74 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur