Barco MGP D5 Manuel utilisateur

User Guide

MGP D5

www.barco.com

B4100515 - 00

October 2004

User Guide TABLE OF CONTENTS

MGP D5 3

TABLE OF CONTENTS

INTRODUCTION ..................................................................................... 4

SAFETY & WARNINGS ........................................................................... 5

OVERVIEW............................................................................................. 9

KEYPAD ............................................................................................... 10

STATUS ................................................................................................ 12

REMOTE CONTROL............................................................................... 13

CONNECTOR PANEL............................................................................. 16

SET UP VIDEO...................................................................................... 18

SETUP COMPUTER ............................................................................... 19

IMAGE ADJUSTMENTS ......................................................................... 20

CEILING MOUNT (option) ................................................................... 21

USING THE PROJECTOR........................................................................ 23

MENU SYSTEM .................................................................................... 25

MOUSE CONTROL ................................................................................ 37

RS 232 AND LAN CONTROL ................................................................ 38

TROUBLESHOOTING............................................................................. 39

MAINTENANCE.................................................................................... 41

LAMP CHANGE.................................................................................... 43

SERVICE INFORMATION....................................................................... 46

TECHNICAL DATA................................................................................. 47

DECLARATIONS.................................................................................... 54

INTRODUCTION User Guide

4 MGP D5

INTRODUCTION

This digital projector is designed with the latest state-of-the-art

technologies in illumination, imaging, optics, electronics, thermal

and industrial design in order to serve traditional as well as novel

imaging applications across a variety of markets, offering

features such as:

• 1400x1050 pixel SXGA+ DLP™ technology

• Single chip DMD™ with DarkChip2™ technology by Texas

Instruments®

• HIGH CONTRAST for vibrant colors and deep blacks

• HIGH RESOLUTION for unprecedented detail

• HIGH BRIGHTNESS for larger screens

• DEEP BLACKS for maximum detail

• REDUCED IMAGE NOISE through high end signal processing

• FAROUDJA DCDi™ Video processing and de-interlacing

• ECO MODE for reduced power consumption and lower

audible noise

• VARIABLE LAMP POWER for alignment of multi-screen

configurations

• LONG LIFE LAMP (up to 4000 hours) in low power ECO mode

• STYLISH AND COMPACT DESIGN to fit most applications,

installed or movable

• SIX VIDEO and GRAPHICS INPUTS for virtually any video and

data source

• LAN, RS232 and USB ports for control and monitoring

The specifications and functionality of the product may change

without prior notice.

User Guide SAFETY & WARNINGS

MGP D5 5

SAFETY & WARNINGS

This user guide contains important information about safety

precautions and the set-up and use of the projector. Please read

the manual carefully before you operate the projector.

SAFETY

This device complies with relevant safety regulations for data

processing equipment for use in an office environment. Before

using the projector for the first time, please read the safety

instructions thoroughly.

WARNING

Use only the cables and cords supplied with the projector or

original replacement cables. Using other cables or cords may lead

to malfunction and permanent damage of the unit.

Always use 3-prong power cord to ensure proper grounding of

the unit. Never use 2-prong power cords, as this is dangerous and

could lead to electrical shock.

Never open the unit. The projector contains no user serviceable

parts. Refer all repairs to qualified personnel only.

Make sure that no objects enter into the vents and openings of

the set. Do not spill any liquids on the projector or into the vents

or openings of the unit.

Always remove lens cap before switching on the projector. If the

lens cap is not removed, it may melt due to the high energy light

emitted through the lens. Melting the lens cap may permanently

damage the surface of the projection lens.

Do not look into the projection lens when the projector is

switched on. The strong light may permanently damage sight.

Do not look into the laser beam when activated on the remote

control. Laser light may permanently damage sight. Do not point

laser beam on people.

SAFETY & WARNINGS User Guide

6 MGP D5

Only place the projector on a stable surface, or mount it securely

using an approved ceiling-mount.

Do not drop the projector.

Always operate the projector horizontally, within the range of the

adjustable rear feet. Operating the unit in other positions may

reduce lamp life significantly, and may lead to overheating,

resulting in malfunctioning.

Always allow ample airflow through the projector. Never block

any of the air vents. Never cover the unit in any way while

running. Allow for sufficient distance to walls and ceilings to

avoid overheating. Minimum safety distance to any side of the

unit is 50 cm/20" in any direction.

CAUTION! Hot air is exhausted from the side vent. Do not place

objects that are sensitive to heat nearer than 50 cm/20" to the

exhaust vent.

The projector is designed for indoor use only. Never operate the

unit outdoors.

Do not operate the projector outside its temperature and

humidity specifications, as this may result in overheating and

malfunctioning.

Only connect the projector to signal sources and voltages as

described in the technical specification. Connecting to unspecified

signal sources or voltages may lead to malfunction and

permanent damage of the unit.

Allow the unit to cool down for 60 minutes before lamp change.

User Guide SAFETY & WARNINGS

MGP D5 7

INFORMATION AND WARNING ABOUT POTENTIAL HEALTH ISSUES

RELATED TO MERCURY VAPOR

This projector is using an extremely bright UHP™ lamp for

illumination to attain the desired high brightness image.

This technology is similar to other high-pressure discharge lamps

that are extensively used in cars, street lights and other lighting

appliances today. These lamps, like fluorescent lighting, contain

small amounts of mercury. The amount of mercury present in a

lamp is far below the limits of danger set by the authorities.

It is very important that lamps containing mercury are treated

properly to minimize potential health hazards.

The UHP™ lamp, like any other high brightness projector lamp, is

under high-pressure when operating. While the lamp and the

projector are carefully designed to minimize the probability of

lamp rupture, the lamp may break while operating and small

amounts of mercury vapor may be emitted from the projector.

The probability of rupture increases when the lamp reaches its

nominal life. It is therefore highly recommended that the lamp is

replaced when the rated lifetime is reached.

As a general precaution, secure good ventilation in the room

when operating the projector. If lamp rupture occurs, evacuate

the room and secure good ventilation. Children and pregnant

women in particular should leave the room.

When replacing a worn lamp, dispose of the used lamp carefully

by proper recycling.

Mercury is a naturally occurring, stable metallic element that

may pose a safety risk to people under certain conditions.

According to the Public Health Statement for Mercury published

by the Agency for Toxic Substances and Disease Registry

("ATSDR", part of the United States Public Health Service), the

brain, central nervous system and kidneys are sensitive to the

effects of mercury, and permanent damage can occur at

sufficiently high levels of exposure. Acute exposure to high

concentrations of mercury vapor can cause conditions such as

lung and airway irritation, tightness in the chest, a burning

SAFETY & WARNINGS User Guide

8 MGP D5

sensation in the lungs, coughing, nausea, vomiting and diarrhea.

Children and fetuses are particularly sensitive to the harmful

effects of metallic mercury to the nervous system.

Seek medical attention if any of the above symptoms are

experienced or if other unusual conditions are experienced

following lamp rupture.

REMOTE CONTROL WARNING

Laser radiation class II product; wavelength 670nm; maximum

output 1 mW.

Remote control complies with applicable requirements of 21 CFR

1040.10 and 1040.11.

Remote control complies with applicable requirements of EN 60

825-1: 1994 + A11

LASER RADIATION WARNING

CAUTION: Laser radiation. Do not stare into the beam.

Laser diode: Wavelength 570 mm, max. output 1 mW.

Class II laser product.

User Guide OVERVIEW

MGP D5 9

OVERVIEW

AFocus ring

BZoom ring

CIR sensor

DVentilation

EKeypad

FConnector panel

GPower connector

HLamp house

IAdjustable foot

JFoot release

KSecurity lock

LCeiling mount

KEYPAD User Guide

10 MGP D5

KEYPAD

POWER

Switches the projector between on and standby modes. Press

firmly (1 sec) to switch on. Press firmly (1 sec) twice to switch

off.

AUTO

Adjusting the projector to display a correct image, including

position, width, height, contrast, brightness and overall stability.

Activates the menu system. Use the four arrow keys to navigate

and to activate.

Select menu option when menu system is activated. Activates

the keystone correction when the menu system is not in use. Use

the four arrow keys to adjust horizontally and vertically.

SOURCE

Use the two arrow keys to select source when keystone

correction and menu system is not activated.

AUTO STATUS

MENU POWER

SOURCE SOURCE

VOLUME +

VOLUME –

Autres manuels pour MGP D5

Table des matières

Autres manuels Barco Projecteur

Barco

Barco R9010310 Manuel utilisateur

Barco

Barco XDM Manuel utilisateur

Barco

Barco R9850010 Manuel utilisateur

Barco

Barco DATA 708HS R9002230 Manuel utilisateur

Barco

Barco R5976336 Manuel utilisateur

Barco

Barco SIM 7QP HB Manuel utilisateur

Barco

Barco XDL-4K30 Manuel utilisateur

Barco

Barco OV-501 Manuel utilisateur

Barco

Barco R9050100 Manuel utilisateur

Barco

Barco HDX 4K Manuel utilisateur

Barco

Barco GALAXY R9040310 Manuel utilisateur

Barco

Barco Galaxy NH-12 Manuel utilisateur

Barco

Barco OverView cDG67-DL Manuel utilisateur

Barco

Barco DP2K Series Manuel utilisateur

Barco

Barco HDF W series Caractéristiques techniques

Barco

Barco CLM R10+ R90501001 Manuel utilisateur

Barco

Barco Galaxy 6 Classic+ Manuel

Barco

Barco ACTAS 2 Manuel utilisateur

Barco

Barco R6400 Manuel utilisateur

Barco

Barco HDQ 4K35 Manuel d'utilisation

Barco

Barco ClickShare Manuel utilisateur

Barco

Barco BARCOVISION 8100 Manuel utilisateur

Barco

Barco 70/60 Manuel utilisateur

Barco

Barco UDX Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur