Baracoda OrKan Manuel utilisateur

Data Capture

for Workforce

in Motion

orKan ‘barcode’ terminal

User Guide

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

2/35

Revision History

Changes to the original manual are listed below.

Document Date Author Description

1.0 4th Jan. 2012 AP/TF Initial

1.1 6th Jan. 2012 TF VII.1 : GUI interface : LEDs table modified

1.2 11th April.2012 TF minor modifications

1.3 23rd April 2012 TF/AFR Add ‘XIRING – ingenico Healthcare/eID”

1.4 26th April 2012 TF FCC id completed for FCC submission

1.5 22nd May 2012 TF FCC paragraph modified following FCC request

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

3/35

I. Summary

Revision History................................................................................................................. 2

I. Summary..................................................................................................................... 3

II. Introduction................................................................................................................ 5

III. Product presentation.............................................................................................. 6

1) Front....................................................................................................................... 6

2) Side......................................................................................................................... 7

3) Top & Bottom........................................................................................................ 7

4) Back........................................................................................................................ 7

IV. Installing / replacing the protective boot............................................................... 8

V. Installing / replacing the battery ............................................................................... 9

VI. How to recharge the orKan terminal ? ............................................................... 10

VII. Switching the terminal ON/OFF......................................................................... 12

1) How to switch ON ? ............................................................................................ 12

2) How to switch OFF ? .......................................................................................... 13

VIII. GUI interface.................................................................................................... 14

1) LEDs..................................................................................................................... 14

2) Display.................................................................................................................. 14

3) ‘Frozen display’................................................................................................... 16

IX. Connecting your orKan terminal ........................................................................ 17

1) Slave mode (default) ........................................................................................... 17

2) Master mode....................................................................................................... 17

X. Configuring your orKan terminal........................................................................... 18

1) Reset to default settings...................................................................................... 18

2) Bluetooth Security Settings................................................................................ 18

3) Barcode Symbology Settings.............................................................................. 19

4) Data format.......................................................................................................... 19

5) Beeps, Vibrator and LEDs................................................................................. 20

6) Power Management ............................................................................................ 20

7) Low Battery......................................................................................................... 21

XI. How to capture data ?.......................................................................................... 22

1) orKan positionning to read barcode ................................................................. 22

2) Different usage modes......................................................................................... 23

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

4/35

a. Real Time mode................................................................................................ 23

b. Real Time mode –with No Data Loss option................................................... 23

c. Batch mode ....................................................................................................... 23

3) Different Reading modes.................................................................................... 24

a. Trigger mode (default setting) .......................................................................... 24

b. Aiming mode mode........................................................................................... 24

c. AutoScan mode................................................................................................. 24

d. Manual AutoScan mode.................................................................................... 24

XII. orKan embedded application(s)........................................................................... 25

1) Global structure.................................................................................................. 25

a. How to go into an application?......................................................................... 25

b. How to quit a running application .................................................................... 25

c. Terminal info .................................................................................................... 26

2) Application: Introduction .................................................................................. 26

3) Pre-loaded applications...................................................................................... 28

a. Standard ............................................................................................................ 28

b. Quantity............................................................................................................. 28

c. Delivery............................................................................................................. 28

d. Access Control.................................................................................................. 29

XIII. Connectivity Solution available for orKan...................................................... 31

1) Software solutions (for end-user) ...................................................................... 31

a. K-Emul.............................................................................................................. 31

b. BaracodaManager (for mobile host devices).................................................... 31

c. Baracoda Desktop Manager (for windows PC) ................................................ 31

2) Baracoda Software Development Kit (for developers & integrators)............ 31

XIV. Safety / Regulatory............................................................................................... 33

1) FCC ...................................................................................................................... 33

2) EU......................................................................................................................... 33

3) Laser notice (for orKan Laser –BOK-LA)...................................................... 34

XV. Limited Warranty................................................................................................. 35

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

5/35

II. Introduction

The orKan is easy to use - just press the trigger button in order to switch ON the terminal. Please

use the side buttons to change the current application and the trigger button to select the

application you want to use. To return to the main menu press the two side buttons at the same

time and select MAIN MENU using the trigger button. The colour of the LEDs indicates the

device status. A beep indicates that the terminal has connected to the remote host or that a

piece of data has been captured successfully. Acknowledgement of a completed scan is

configurable by the user.

Captured data (barcode…) read by orKan is transmitted in real time to the remote host using

Bluetooth wireless technology. It can also be stored in the terminal’s flash memory and later

uploaded to a remote host using Bluetooth wireless technology. You can download software

updates as well as additional documentation from http://www.baracoda.com after registration.

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

6/35

III. Product presentation

The orKan has two (2) LEDs, three (3) trigger buttons and one (1) OLED screen. They provide the

Bluetooth connection status and the reading status. The right-hand side LED is the Bluetooth

connection LED (BCL) and the left-hand size LED is the reading status LED (RSL).

1) Front

The function of the BCL is to give:

-the Bluetooth connection status of the terminal (connected or not connected).

-the operating mode of the terminal (Real Time mode, Batch mode or Master Mode).

The function of the RSL is to give:

-the information whether or not a piece of data has been captured.

-the battery level status. If the battery level is too low, you will need to recharge the

battery immediately.

Scan engine window

Connections with Cradle

Bluetooth Connection Led

(BCL)

Reading Status Led

(RSL)

Right button

Middle button (Trigger)

Left button

Lanyard

OLED

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

7/35

2) Side

On the right-hand side of the terminal you will find a micro USB socket. On the opposite

side one can find the lanyard used to get hold of the terminal more easily.

3) Top & Bottom

You will find the scan engine of the terminal in the top part. At the bottom the cradle

connector is installed.

4) Back

The label on the back side of the orKan terminal provides the

following information:

-the terminal model

-its Bluetooth MAC address

-its serial number

Scan engine

window

Connection with Cradle

USB

Lanyard

Label

Battery door

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

8/35

IV. Installing / replacing the protective boot

To put the protective boot on the terminal:

-put the string lanyard in its place

-put the terminal in the protective from bottom up as shown on the picture below

To remove the protective boot, please push the top part of the terminal.

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

9/35

V. Installing / replacing the battery

Please use only Baracoda-approved rechargeable batteries. The use of any other batteries may

damage the terminal and void the warranty.

To insert batteries into the orKan:

-use a coin to unlock and remove the battery cover at the back of the orKan

-turn the lock underneath the terminal to a vertical position (upwards).

Close Open

Put the Baracoda battery in its location. Please pay attention to well position the battery

connector.

Slide the cover from the bottom up and lock it into place.

Caution: There is a risk of explosion if the battery is replaced by an incorrect battery type.

Dispose of used batteries according to the instructions.

XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5

10/35

VI. How to recharge the orKan terminal ?

The internal battery can be recharged by using the included AC adapter or a charging cradle

(optional). The adapter rating is 5V, 1,3A.

When the terminal is charging, the RSL led (left) is red (solid). When the terminal is fully

charged, the RSL led (left) is green (solid).

A full recharge (from completely drained batteries) takes approximately six (6) hours.

Make sure that the temperature is between 0°C and 35°C to recharge the

battery.

When the original batteries wear out, please contact your Baracoda reseller for replacements.

Open the USB cover

USB cover

Connect the power supply

Table des matières

Autres manuels Baracoda Terminal tactile

Baracoda

Baracoda 1D CMOS Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

Baracoda orKan Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques