Banner SureCross DX99 Mode d’emploi

SureCross™ DX99 Battery Board Replacement

Instructions

Printed in USA Jun 2010 P/N 152783

The battery board is located in the back chamber. To replace the

battery board, follow these instructions in a safe environment.

1. Unscrew the metal cap from the radio chamber.

2. Gently lift the radio off the pins holding the radio in

position. Do not disconnect any wiring.

3. Unscrew the screws holding the wiring board to its

mount and gently lift up.

4. Disconnect the blue and gray battery cable from this

wiring board.

5. Unscrew the metal cap on the battery chamber.

Battery chamber

Radio chamber

6. Remove the three screws holding the old battery board

to the mount.

7. Lift the old battery board out of the chamber.

The following items shipped as part of the battery board

replacement package:

Replacement battery board•

Black plastic spacer•

To replace the battery board, the following tools are needed:

small Phillips screwdriver•

BannerEngineeringCorp.,9714TenthAve.No.,Minneapolis,MNUSA55441•Phone:763.544.3164•www.bannerengineering.com•Email:[email protected]

SureCross™ DX99 Battery Board Replacement

P/N 152783

The manufacturer does not take responsibility for the violation of any warning listed in this

document.

CAUTION. Make no modiﬁcations to this product. Any modiﬁcations to this

product not expressly approved by Banner Engineering could void the user’s

authority to operate the product. Contact the Factory for more information.

Lightning Arrestors/Surge Protection. Always use lightning arrestors/surge protection

with all remote antenna systems to avoid invalidating the Banner Engineering Corp.

warranty. No surge protector can absorb all lightning strikes. Do not touch the SureCross

device or any equipment connected to the SureCross device during a thunderstorm.

WARRANTY. Banner Engineering Corp. warrants its products to be free from defects for

one year. Banner Engineering Corp. will repair or replace, free of charge, any product

of its manufacture found to be defective at the time it is returned to the factory during

the warranty period. This warranty does not cover damage or liability for the improper

application of Banner products. This warranty is in lieu of any other warranty either

expressed or implied.

All speciﬁcations published in this document are subject to change. Banner reserves

the right to modify the speciﬁcations of products, prior to their order, without notice.

Banner Engineering reserves the right to update or change documentation at any time.

For the most recent version of any documentation, please refer to our website: www.

bannerengineering.com. © 2010 Banner Engineering Corp. All rights reserved.

8. Place the plastic spacer inside the battery chamber

as shown in the photo to the right. There is a cutout to

allow the spacer to ﬁt around the screw mount.

9. Insert the blue and gray power wires into the hole in the

chamber and place the new battery board on top of the

plastic spacer.

10. Replace the three mounting screws. Do not overtighten

the screws as this may damage the battery board.

11. Turn the metal housing over and connect the battery

wires back to the wiring board pigtail.

12. Screw the wiring board back into place.

13. Mount the radio board onto its pins.

14. Replace the metal caps on both chambers.

Autres manuels Banner Porte

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner DX80N2X6S-PB2 Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner AMG Manuel utilisateur

Banner

Banner Sure Cross Performance GatewayPro DX80P*A6... Manuel utilisateur

Banner

Banner Q45 Manuel utilisateur

Banner

Banner SureCross DX80N9X6S0P0M4M4 Manuel utilisateur

Banner

Banner Sure Cross P2-KR Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner SureCross DX80 Instructions d'installation et d'entretien

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner SureCross Performance FlexPower DX80G9M2S-P7 Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Banner

Banner Sure Cross DX80 Manuel utilisateur

Banner

Banner Sure Cross DX80 Series Manuel utilisateur

Banner

Banner SureCross Performance FlexPower DX80G9M2S-P7 Manuel utilisateur

Banner

Banner SureCross Performance GatewayPro Series Manuel utilisateur

Banner

Banner Sure Cross DX80 Manuel utilisateur

Banner

Banner DXMR90-4K Manuel utilisateur

Banner

Banner DX80G9M6S-P2 Manuel utilisateur

Banner

Banner Sure Cross DX80 Manuel utilisateur

Banner

Banner SureCross DX80 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur