AXIOMTEK OPS883-H Series Manuel utilisateur

OPS883-H Series

Intel Open Pluggable Specification

Box

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make

any commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice

No part of this document may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of Axiomtek Co., Ltd.

November 2014, Version A1

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested in compliance with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are mean to provide reasonable protection

against harmful interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or radiate radio frequency

energy and cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following methods:

A. Increase the separation between the equipment and receiver.

B. Connect the equipment to another outlet of a circuit that does not connect with the

receiver.

C. Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with the emission limits.

Safety Precautions

Before getting started, please read the following important safety precautions.

1. The OPS883-H series does not come equipped with an operating system. An

operating system must be loaded first before installing any software into the

computer.

2. Be sure to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and place all electronic components

in any static-shielded devices. Most electronic components are sensitive to

static electrical charge.

3. Disconnect the power cord from the OPS883-H series before any installation.

Be sure both the system and external devices turned OFF already. Make sure

the OPS883-H series set to ground properly.

4. The brightness of the flat panel display will be getting weaker as frequently

used. However, the operating period varies depending on the application

environment.

5. The flat panel display is not susceptible to shock or vibration. When assembling

the OPS883-H series, make sure toinstall it securely.

6. Do not leave this equipment in an uncontrolled environment where the storage

temperature is below 0℃or above 45℃. It may damage the equipment.

7. External equipment intended for connection to signal input/out or other

connectors shall comply with relevant UL/IEC standard.

8. Do not open the back cover of the system. If opening the cover for

maintenance is necessary, only allow technicians to implement it. Integrated

circuits on computer boards are sensitive to static electricity. To avoid

damaging chips from electrostatic discharge, observe the following precautions:

9. Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on your body.

10. Please wear a wrist-grounding strap if you handling boards and eletronic

components.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel®and Atom™are registered trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation. Other brand names and

trademarks are the properties and registered brands of their respective owners.

Table of Contents

Disclaimers.............................................................................................................. ii

Safety Approvals.................................................................................................... iii

Safety Precautions................................................................................................. iv

CHAPTER 1 INTRODUCTION.................................................................................1

1.1 General Description............................................................................ 1

1.2 System Specifications........................................................................ 2

1.2.1 Main CPU Board................................................................................................ 2

1.2.2 I/O System ......................................................................................................... 2

1.3 Mechanical Assembly......................................................................... 4

1.3.1 Dimensions........................................................................................................ 4

1.3.2 I/O outlet ............................................................................................................ 5

1.3.3 Mechanical Specifications............................................................................... 6

1.3.4 Reference Design ........................................................................................... 11

1.4 Package List...................................................................................... 12

CHAPTER 2 HARDWARE INSTALLATION........................................................13

2.1 CPU, Storage, DRAM, Wireless & 3G module Installations............ 13

2.2 Pluggble Module Method.................................................................. 21

CHAPTER 3 CONNECTORS .................................................................................23

3.1 Connectors........................................................................................ 23

3.1.1 JAE TX25 Connector (CN1)............................................................................ 25

3.1.2 CPU FAN (CN2) ............................................................................................... 26

3.1.3 SIM Card Slot (CN4)........................................................................................ 26

3.1.4 HDMI Connector (CN5)................................................................................... 27

3.1.5 Power & Reset Button (CN6) ......................................................................... 27

3.1.6 Audio MIC-IN Connector (SCN2) ................................................................... 28

3.1.7 AudioLine-Out Connector (SCN3)................................................................. 28

3.1.8 Battery 2 PIN (BAT1)....................................................................................... 28

3.1.9 Mini Card Slot (SCN1)..................................................................................... 29

3.1.10 SSW1 Setting................................................................................................... 30

3.1.11 SATA & SATA Power Connector (SATA1) ................................................. 31

3.1.12 RJ45 (I217LM) (LAN1)..................................................................................... 32

3.1.13 USB 3.0 Port (SUSB1)..................................................................................... 32

3.1.14 USB 2.0 Port (SUSB2/3).................................................................................. 33

3.1.15 COM Port (COM2) ........................................................................................... 33

CHAPTER 4 AMI BIOS SETUP UTILITY.............................................................35

4.1 Starting.............................................................................................. 35

4.2 Navigation Keys................................................................................ 35

4.3 Main Menu ......................................................................................... 36

4.4 Advanced Menu ................................................................................ 37

4.5 Chipset Menu .................................................................................... 47

4.6 Boot Menu ......................................................................................... 53

4.7 Security Menu ................................................................................... 54

4.8 Save & Exit Menu.............................................................................. 55

APPENDIX A REFERENCE DOCUMENTS ........................................................57

APPENDIX B WATCHDOG TIMER......................................................................59

OPS883-H User’s Manual

Introduction

CHAPTER 1

INTRODUCTION

This chapter contains general information and detailed specifications of the OPS883-H series.

Chapter 1 includes the following sections:

General Description

Specification

Michanical Assembly

Package List

1.1 General Description

Intel Open Pluggable Specification (OPS) Compliance

OPS883-H series is based on the 4th generation Intel®Core™processor on board

with Intel®H81 Express Chipset platform and it also future products. The Pluggable

Module is dedicated to provide an interchangeable solution to the digital signage

media players with compatible connector. This document provides the module form

factor, connector specification, reference thermal solution, and boundary conditions

in order to ensure the functionally of the module in all compatible display panel

system.

OPS883-H series meets Intel Open Pluggable Specification for design and

development, simplifying system upgrade maintenance for manufacturers and

developers that supports Intel®4th Generation Core I series family, which stand for

high flexible and user-friendly digital signage applications.

Easy maintenance

OPS883-H series offers a best solution for digital signage market. Compliant with

Intel OPS architecture, digital signage players are capable of deploying

interchangeable systems faster and easing upgrading/maintenance, while lowering

costs for development and implementation. Additionally, having the ability to simply

slot-in and out the unique pluggable engine box makes daily hassle easier and

faster for users.

OPS883-H series has pluggable engine box design; you can change storage, DRAM

and update configurations more easily

OPS883-H User’s Manual

Introduction

1.2 System Specifications

1.2.1 Main CPU Board

CPU

LGA1150 socket type 4th generation Intel® Core™ i5/i3/Celeron Processor

System Chipset

Intel® H81 PCH

BIOS

American Megatrends Inc.

UEFI (Unified Extensible Firmware Interface) BIOS.

System Memory

One socket 204-pin DDR3 1333/1600MHz SO-DIMM, maximun up to 8GB

Wireless Module (Optional)

Optional IEEE802.11 b/g/n, Bluetooth 2.0

1.2.2 I/O System

Standard I/O

One HDMI (with 4K solution)

Two USB ports 2.0

One USB ports 3.0

One RS-232(COM2)

One Power on /Off button

One Reset button

Ethernet

10/100/1000Mbps Ethernet (with Intel®I217)

Audio

Line-out/ Mic-in

Expansion

One Full-size PCI Express Mini card (USB+PCIe signals supported)

Storage

One. 2.5” SATA HDD tray

Net Weight

0.9Kg(1.99 lb) without cooler

OPS883-H User’s Manual

Introduction

Dimension (Main Body Size)

200 mm x 119 mm(D) x 30 mm(H)

Operation Temperature

0℃to 45℃(with airflow 1.2 m/s)

NOTE: All specifications and images are subject to change without notice.

OPS883-H User’s Manual

Introduction

1.3 Mechanical Assembly

1.3.1 Dimensions

This diagram shows you dimensions and outlines of the OPS883-H series

The overall dimension of the module including the mounting frame is 200mm x 119mm x

30mm, and it shows the location of the screw holes of front panel as well as the security lock.

※While plugging the OPS module, please make sure the heat sink side of OPS

module toward the outside. Axiomtek will be out of reasonability if there is any

damage occurred due to it.

Autres manuels pour OPS883-H Series

Table des matières

Autres manuels AXIOMTEK Écran tactile

AXIOMTEK

AXIOMTEK GOT812W-511 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT318A-ELK-WCD Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT815L-511 Manuel utilisateur

AXIOMTEK

AXIOMTEK FDK series Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3846T-832 Manuel utilisateur

AXIOMTEK

AXIOMTEK P1177E-500 Manuel utilisateur

AXIOMTEK

AXIOMTEK PANEL5155-807 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT315W-521-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT710S-837-R-E3845-24-110VDC Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT-3126TL-830 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT-3150T Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT317-502-FR Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT5840T-832 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT-5152T-830 Manuel utilisateur

AXIOMTEK

AXIOMTEK MPC170-831-DC Manuel utilisateur

AXIOMTEK

AXIOMTEK GO712-837-R-E3845-24- 110VDC Manuel utilisateur

AXIOMTEK

AXIOMTEK P1157S-881 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT815-834 Manuel utilisateur

AXIOMTEK

AXIOMTEK MPC225-873 Series Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT615-801 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3187W-832-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK MPC153-834 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3217W-845-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK P1127E-500 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur