AXIOMTEK GOT-3126TL-830 Manuel utilisateur

GOT-3126TL-830

All-in-One

12.1” SVGA TFT Fanless Compact-Size

PANEL PC

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain

accurate information. AXIOMTEK Co., Ltd. assumes no responsibility

for any infringements of patents or any third party’s rights, and any

liability arising from such use.

AXIOMTEK does not warrant or assume any legal liability or

responsibility for the accuracy, completeness or usefulness of any

information in this document. AXIOMTEK does not make any

commitment to update the information in this manual.

AXIOMTEK reserves the right to change or revise this document

and/or product at any time without notice.

No part of this document may be reproduced, stored in a retrieval

system, or transmitted, in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise, without the prior

written permission of AXIOMTEK Co., Ltd.

February 2011, Version A2

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested in compliance with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are meant to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following methods:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment to another outlet of a circuit that

doesn’t connect with the receiver.

4. Consult the dealer or an experienced radio/TV technician for

help.

Shielded interface cables must be used in order to comply with the

emission limits.

Safety Precautions

Before getting started, please read the following important safety

precautions.

1. The GOT-3126TL-830 does not come equipped with an

operating system. An operating system must be loaded first

before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any static-

shielded devices. Most electronic components are sensitive

to static electrical charge.

3. Disconnect the power cord from the GOT-3126TL-830

before any installation. Be sure both the system and external

devices are turned OFF. A sudden surge of power could ruin

sensitive components that the GOT-3126TL-830 must be

properly grounded.

4. The brightness of the flat panel display will be getting weaker

as a result of frequent usage. However, the operating period

varies depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The GOT-3126TL-830 may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you must

follow the same procedure and not spray any cleaner on the

flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibration.

When assembling the GOT-3126TL-830, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the cover

for maintenance is a must, only a trained technician is

allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from

electrostatic discharge, observe the following precautions:

zBefore handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static

electricity on your body.

zWhen handling boards and components, wear a wrist-

grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel®and Atom™are registered trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft

Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

Other brand names and trademarks are the properties and registered

brands of their respective owners.

–

Table of Contents

Disclaimers..........................................................................ii

Safety Approvals.................................................................iii

Safety Precautions..............................................................iv

CHAPTER 1 INTRODUCTION......................................... 1

1.1General Description............................................1

1.2Specifications......................................................3

1.2.1Main CPU Board......................................................... 3

1.2.2I/O System .................................................................. 3

1.2.3System Specification .................................................. 4

1.3Dimensions.........................................................5

1.4I/O Outlets...........................................................6

1.5Packing List ........................................................7

CHAPTER 2 HARDWARE INSTALLATION ................ 8

2.1Open back cover.................................................8

2.2CF card Installation...........................................10

2.2Serial Ports Interface........................................11

2.3Ethernet............................................................13

2.4Mountings: Panel / Wall / Desktop / VESA.......14

2.4.1 VESA-ARM/Wall-Mount ............................................... 14

2.4.2 Desktop Kit Assembly ..................................................15

2.4.3 Panel-mount Kit Assembly........................................... 15

2.5HDD Installation................................................16

2.6DRAM Installation.............................................18

2.7Wireless LAN Card Installation.........................20

2.8Power................................................................22

CHAPTER 3 AMI BIOS SETUP UTILITY ..................... 24

3.1Starting .............................................................24

3.2Navigation Keys................................................24

3.3Main Menu........................................................25

3.4Advanced Menu................................................26

3.5PCI PnP Menu..................................................39

3.6Boot Menu ........................................................42

3.7Security Menu...................................................47

vii

3.8Chipset Menu....................................................49

3.9Exit Menu..........................................................54

CHAPTER 4 DRIVERS INSTALLATION ..................... 56

4.1System..............................................................56

4.2Touch Screen ...................................................57

4.2.1Specification.............................................................. 57

4.2.2Driver Installation- Windows XP ............................... 57

4.3Embedded O.S.................................................60

4.3.1Windows XP Embedded........................................... 60

viii

MEMO

GOT-3126TL-830 User’s Manual

Introduction 1

CHAPTER 1

INTRODUCTION

This chapter contains general information and detailed specifications

of the GOT-3126TL-830. Chapter 1 includes the following sections:

General Description

Specification

Dimensions

I/O Outlets

Package List

1.1 General Description

The GOT-3126TL-830 adopts a 12.1-inch SVGA TFT LCD with

450-nit brightness and an Intel®AtomTM processor N270 1.6

GHz to provide excellent computing performance and thermal

resistance. This fanless platform is especially designed for

operating under heavy-duty environment including steel

refinery, oil pipe, ship, machine maker operating systems and

many more. Having below abilities makes GOT-3126TL-830

surely a most robust and cost-effective solution.

GOT-3126TL-830 User’s Manual

Introduction

Wide Operating Temperature Range

GOT-3126TL-830 features a technology of wide operating

temperature range which allows it to work between -10°C to

+55°C. It incorporates compact ID and fanless cooling system

with a low power Intel®AtomTM processor N270 1.6 GHz,

making the platform a power-efficient solution.

Reliable and Stable Design

The GOT-3126TL-830 adopts a fan-less cooling system and a

CompactFlash™card, which makes it especially suitable for

vibration-heavy environments, best for the transportation, ship,

and industrial machinery markets. For high capacity storage

requirement, GOT-3126TL-830 can work under 1.3G (5 ~

500Hz, random for 2.5” HDD) in operation mode with a patent

of anti-vibration design. The patent improves the system

reliability and sustainability.

WLAN Antenna Supported (optional)

GOT-3126TL-830 has a PCI Express Mini Card slot for optional

add-ons such as wireless LAN card for 802.11 b/g connections

& 3G/GPRS application, graphics-enhanced video card,

universal analog TV/FM tuner/AV capture card, and more. It

also provides an optional fixed rotational WLAN antenna for

wireless network connection.

More Features

GOT-3126TL-830 utilizes one 200-pin DDR2 533 SODIMM system

memory max. up to 2GB, one SATA HDD and one CompactFlashTM

slot. It provides over-current protection-fuse and a full set of I/O

including 3 RS-232, 1 RS-232/422/485, 4 USB 2.0, 1 audio (line-out),

1 Gigabit Ethernet and 1 VGA. Additionally, this slim unit supports

panel mount, wall mount (optional), VESA mount (optional) and

desktop stand (optional).

Table des matières

Autres manuels AXIOMTEK Écran tactile

AXIOMTEK

AXIOMTEK MPC240 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3156T-832 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT315A-ELK-WCD Manuel utilisateur

AXIOMTEK

AXIOMTEK P1177E-871 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT318A-ELK-WCD Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321A-ELK-WCD Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT815L-511 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT318W-521-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT-812 Series Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT107W-319 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3156T-834 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT710S-837-R-E3845-24-110VDC Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT315WL-845-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3217WL-845-PCT Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3126T-832 Manuel utilisateur

AXIOMTEK

AXIOMTEK P1157S-881 Manuel utilisateur

AXIOMTEK

AXIOMTEK PANEL5150-675 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT3187WL-834 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT815-834 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT115-319 Manuel utilisateur

AXIOMTEK

AXIOMTEK MPC225-873 Series Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-502-PCT/FR Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT815W-511 Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT-3100T Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur