AWS AT-500 Manuel utilisateur
American Weigh Scales, Inc.
AT-500
AT-100
User Manual
ASH TRAY SCALE
Digital Pocket Scale
C
A
L
T
A
R
E
M
O
D
E
O
N
/
O
F
F
MAX: 500g d=0.1g
g
oz
dwt
ozt
Ash Tray Scale Manual
Thank you for purchasing the American Weigh Ash
Tray Scale digital pocket scale. Please read all
operating instructions carefully before use. Scales are
precision instruments and should always be handled
with proper care. To ensure years of reliable service,
keep these simple tips in mind:
• Do not exceed the scales maximum capacity.
Overloading your scale can permanently damage it!
• Avoid exposure to extreme heat or cold. Scales
perform best at normal room temperature. If
temperatures have changed dramatically, recalibration
may be necessary.
• Allow your scale to warm up for 30-60 seconds
before performing calibration (if available).
• Store your scale in a clean, dry location. Dust, dirt,
and moisture can accumulate on the weighing sensors
and electronics causing innacuracy or malfunction.
• Avoid using your scale in close proximity to strong
radio wave emitting devices such as computers, cash
registers, and cordless phones.
• Always weigh on a at and level surface, free from
vibrations and drafts. The corner of a room is usually
the most stable.
• Gently apply all items to be weighed. Do not drop
items onto the weighing platform.
• Avoid dropping your scale. The warranty does not
cover damage due to rough treatment or overload.
I. OPERATION
Place Scale on a horizontal at surface and remove
the metal ash tray cover before weighing.
1. Press the [ON/OFF] key.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) on the weighing platform.
4. Using the [MODE] key, you can switch between
weighing units.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" such as a tray on the platform.
3. Press [TARE] and wait until "0.0g" is displayed.
4. Add the "net-weight-item".
III. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if scale is not weighing properly.
1. Turn the scale ON and wait for the display to show
zero.
2. Press and hold the [CAL] key until the display
shows "CAL". Now release the key.
3. The display will ash "0.0g". Ensure that no weight
is on the scale and press the [CAL] button to calibrate
the zero point of the scale.
4. The display will now ash the required calibration
weight. Place the calibration weight (not included) onto
the center of the platform and press the [CAL] key
once more.
5. The display will show "PASS". Calibration is
complete!
V. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
-----------------------------------------------
[Err] You are overloading the scale. Remove the
excessive load immediately!
[UNST] Use the scale in a more stable position
Model AT-500 AT-100
Capacity 500g / 17.64oz / 16.08ozt /
321.5dwt
100g / 3.53oz / 3.22ozt /
64.30dwt
Resolution 0.1g / 0.005oz / 0.005ozt /
0.1dwt
0.01g / 0.001oz / 0.001ozt /
0.01dwt
Weighing Units g, oz, ozt, dwt g, oz, ct, gn
Calibration Weight (not Included) 200g 100g
Platform Dimensions (inches) ~2.5 x 1.5
Scale Dimensions (inches) 3.8 x 3.8 x 1.3
Power 2 x AAA Batteries (included)
Specications
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels AWS Échelle
AWS
AWS CH-501 Manuel utilisateur
AWS
AWS H-110 Manuel utilisateur
AWS
AWS CV-100 Manuel utilisateur
AWS
AWS PC Series Manuel utilisateur
AWS
AWS EPSILON EP-5KG Manuel utilisateur
AWS
AWS 396LUMA Manuel utilisateur
AWS
AWS Digital Kitchen Scale Manuel utilisateur
AWS
AWS QUARTZ-5K Manuel utilisateur
AWS
AWS AWS-70 Manuel utilisateur
AWS
AWS MERCURY MRC-200 Manuel utilisateur
AWS
AWS mini PRO-30 Manuel utilisateur
AWS
AWS 330LPG Manuel utilisateur
AWS
AWS MiniCD MCD-100 Manuel utilisateur
AWS
AWS CARD-V2 Manuel utilisateur
AWS
AWS BLADE V2 BL2-50 Manuel utilisateur
AWS
AWS mini PRO-50 Manuel utilisateur
AWS
AWS BT-500 Manuel utilisateur
AWS
AWS AT Series Manuel utilisateur
AWS
AWS xp150 Manuel utilisateur
AWS
AWS SC-501 Manuel utilisateur
