Avocent DSR 1024 Manuel utilisateur

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Avocent, the Avocent logo, The Power of Being There, DSView and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2004 Avocent Corporation. All rights reserved. 590-441-501A

Local

Connection

Server

Connect the

server to the

DSRIQ module.

Connect a DSRIQ

module to the

DSR switch.

Power

Transformer

The Power of Being There

To connect a DSR switch

Plug in the keyboard,

monitor and mouse for

your local connection.

Power down the

target server and

attach the power cord

to the DSR switch.

Quick Installation Guide

DSR®

1024 Switch

Connecting power to the

DSR switch

Power down the target server that will be part of

your DSR switching system. Locate the power

transformer and cord that came with your DSR switch.

Plug the 4-pin connector into the rear of the DSR

switch. Plug one end of an AC power cord into the

transformer box and the other end into an appropriate

AC wall outlet.

Connecting the local port

Plug a VGA monitor and the PS/2 keyboard and mouse

cables into the appropriately labeled DSR ports.

Connecting a DSRIQ module to the

DSR switch

Plug one end of a CAT 5 cable (4-pair, up to 10 meters)

into the DSRIQ port and plug the other end into the

RJ-45 connector of a DSRIQ module.

Connecting the server to the

DSRIQ module

Plug the DSRIQ module into the appropriate ports on

the back of the target server.

(Continued on reverse side)

DSR1024 Switch

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Connecting the network

Plug a CAT 5 cable from your Ethernet network into

the LAN port on the back of your DSR switch. Network

users will access the DSR switch through this port.

Connecting an external modem

(optional)

The DSR switch may also be accessed using an ITU

V.92, V.90 or V.34-compatible modem. Plug one end

of the included RJ-45 serial cable into the MODEM

port on the back of your DSR switch. Plug the other

end into the RJ-45 to DB-9 (male) adaptor, which

then plugs into the modem.

NOTE: Using a modem connection instead of a

LAN connection will limit the performance

capability of your DSR switch.

SPC Power

Control Device

Server

Modem

DSView®

Server

Software

Connect the switch

to the network.

Connect the

target server and

DSR1024

switch to the

SPC device.

The Power of Being There

To connect a DSR switch

(continued from reverse side)

Quick Installation Guide

DSR®

1024 Switch

Plug in the

external modem.

Telephone

network

Ethernet

Connecting the SPC power control

device (optional)

Plug one end of the cable supplied with the SPC power

control device into the SPC port on the DSR switch

and plug the other end into the SPC RJ-45 port. Plug

the power cord from the target server into an SPC

power outlet. Plug the SPC device into an appropriate

AC wall outlet.

Powering target and switch

Power up the target server and then power up the

DSR switch.

For additional information

For further instructions on DSR switch connection,

software setup and security configuration, please refer

to the installer/user guide included with the switch.

Check http://register.avocent.com for the latest DSR

software and firmware updates.

DSR1024 Switch

Autres manuels pour DSR 1024

Autres manuels Avocent Changer

Avocent

Avocent AutoView 1515 Manuel utilisateur

Avocent

Avocent DSR Series DSR2035 Manuel d'utilisation

Avocent

Avocent DSR Series DSR1020 Mode d’emploi

Avocent

Avocent AutoView 1515 Manuel

Avocent

Avocent SwitchView SC120 Manuel utilisateur

Avocent

Avocent AutoView 1515 Manuel utilisateur

Avocent

Avocent AutoView 2000 Manuel utilisateur

Avocent

Avocent DSR Series DSR4030 Manuel utilisateur

Avocent

Avocent DSR Series DSR4160 Manuel utilisateur

Avocent

Avocent AMX Switch Series Instructions d'installation et d'entretien

Avocent

Avocent DSR 1021 Manuel utilisateur

Avocent

Avocent AutoView 3100 Manuel utilisateur

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent AutoView 1400 Manuel utilisateur

Avocent

Avocent ESP Multi-Interface Serial Hub SuperSerial Manuel utilisateur

Avocent

Avocent SwitchView Manuel utilisateur

Avocent

Avocent SwitchView SwitchView DVI Comment utiliser

Avocent

Avocent DSR Series DSR2035 Manuel utilisateur

Avocent

Avocent OutLook 1160ES Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR1020 Mode d’emploi

Avocent

Avocent SWITCHVIEW PC Manuel utilisateur

Avocent

Avocent SwitchView Manuel utilisateur

Avocent

Avocent PS/2 KVM Manuel utilisateur

Avocent

Avocent CPS1610 Instructions d'installation et d'entretien

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur