Avery Dennison 9417 Manuel utilisateur

Table des matières

Autres manuels Avery Dennison Imprimante

Avery Dennison

Avery Dennison Pathfinder 6059 Manuel de service

Avery Dennison

Avery Dennison AP4.4 Manuel utilisateur

Avery Dennison

Avery Dennison SNAP 700 Manuel d'utilisation

Avery Dennison

Avery Dennison Monarch 9419 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel de service

Avery Dennison

Avery Dennison MONARCH 9416 XL Manuel utilisateur

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9485 Guide de l'utilisateur

Avery Dennison

Avery Dennison AP7.t Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9855 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9433 Sierra Sport3 Manuel de service

Avery Dennison

Avery Dennison Monarch Tabletop Printer 1 Manuel de service

Avery Dennison

Avery Dennison Monarch Sierra Sport2 Manuel de service

Avery Dennison

Avery Dennison AP7.t Manuel utilisateur

Avery Dennison

Avery Dennison Monarch 9419 Manuel de service

Avery Dennison

Avery Dennison Platinum 6039 Manuel du propriétaire

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel de service

Avery Dennison

Avery Dennison Monarch 9419 Manuel utilisateur

Avery Dennison

Avery Dennison SNAP 700 Manuel utilisateur

Avery Dennison

Avery Dennison FreshMarx 9417 Manuel de service

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel utilisateur

Avery Dennison

Avery Dennison 9688 Manuel utilisateur

Avery Dennison

Avery Dennison Monarch ADTP1 Manuel utilisateur

Avery Dennison

Avery Dennison M09416 TTXLI Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

Avery Dennison® is a registered trademark of Avery Dennison Corporation. ©2013 Avery Dennison Corp. All Rights Reserved.

TC9417PHI Rev. AB6/15

REPLACING THE PRINTHEAD

Use these instructions to replace the printhead assembly in the 9417 Printer.

Audience

These instructions are intended for a skilled service

technician only. For additional information or

assistance, call Service at 1-800-543-6650.

Cautions

♦The 9417 printer contains devices that are

sensitive to electrostatic discharge (ESD); failure

to exercise caution can damage the printer. We

recommend using an ESD wrist strap, grounding

mat, or grounding workbench when performing

maintenance on the printer.

♦Flex connectors between components and board

assemblies are extremely fragile; when damaged,

they require component or board assembly

replacement.

Required Tools

The procedures require the following:

♦A hard, dry surface to set the printer on

♦Phillips screwdriver

Removing the Printhead

1. Turn off the printer and unplug it from the electrical outlet.

2. Open the front cover.

3. Remove the supplies.

4. Remove the six screws that attach the print module covers.

5. Lift up the right then left printer cover; rest them out of the way.

2Replacing the Printhead

6. Lift out the printhead assembly.

7. Open the four black flex connector latches. Remove the flex from the flex connector

Note: Apply careful, even pressure on the latches when opening and closing.

Installing the Printhead

1. Make sure the four black flex connector latches are open, then insert the printhead flex into the

flex connector. Make sure the flex is inserted all the way into the connector.

2. Close all four of the black flex connector latches.

Note: Apply careful, even pressure on the latches when opening and closing.

3. Lay the printhead assembly into place.

Flex Connector Latch

Replacing the Printhead 3

4. Lay the left print module cover in place then lay the right print module cover in place.

5. Secure the printer covers in place.