AVer AVerVision VP-1HD Guide d'installation

Autres manuels pour AVerVision VP-1HD

1

Table des matières

Autres manuels AVer Caméra de documents

AVer

AVer AVerVision M70 Manuel utilisateur

AVer

AVer AVerVision U50 Manuel utilisateur

AVer

AVer AVerVision F50+ Manuel utilisateur

AVer

AVer AVerVision F70W Manuel utilisateur

AVer

AVer AVerVision F series Manuel utilisateur

AVer

AVer M90UHD Manuel utilisateur

AVer

AVer U70 Guide de démarrage rapide

AVer

AVer AVerVision A30 Manuel utilisateur

AVer

AVer AVerVision SPB350+ Manuel utilisateur

AVer

AVer AVerVision M70 Manuel utilisateur

AVer

AVer Vision F50 Manuel utilisateur

AVer

AVer AVerVision F50+ Manuel utilisateur

AVer

AVer AVerVision F17-8M Manuel utilisateur

AVer

AVer TabCam Manuel utilisateur

AVer

AVer AVerVision U15 Manuel utilisateur

AVer

AVer AVerVision F35 Manuel utilisateur

AVer

AVer AVerVision300AF+ Manuel utilisateur

AVer

AVer M5 Manuel utilisateur

AVer

AVer W30 Manuel utilisateur

AVer

AVer M70W Manuel utilisateur

AVer

AVer AVerVision U70+ Manuel utilisateur

AVer

AVer M90UHD Manuel utilisateur

AVer

AVer TR311V2 Manuel utilisateur

AVer

AVer AVerVision M50 Manuel utilisateur

Manuels Caméra de documents populaires d'autres marques

Lumens

Lumens PS760 Manuel utilisateur

Genee World

Genee World GV8100 Manuel utilisateur

Touchboards

Touchboards Vidifox DV 480 Manuel utilisateur

Dukane

Dukane 210 Manuel utilisateur

TTS

TTS Easi-View Pro Manuel utilisateur

Lumens

Lumens dc153 Manuel utilisateur

Avermedia

Avermedia AVerVision SPB350 Manuel utilisateur

Inswan

Inswan INS-3 Manuel utilisateur

Genee

Genee Vision 6100 Manuel utilisateur

Rolls

Rolls DB14 - 02/10 Manuel utilisateur

Lumens

Lumens DC-W80 Manuel utilisateur

Dukane

Dukane FASTFAX AV-P750U Manuel utilisateur

Optoma

Optoma DC554 Manuel utilisateur

Ipevo

Ipevo Ziggi Manuel utilisateur

Vidifox

Vidifox PV 380 Manuel utilisateur

Recordex

Recordex SimplicityCam SC5i+ Manuel technique

Ken A Vision

Ken A Vision TeachCam 910-171-150 Manuel utilisateur

Avermedia

Avermedia AVerVision SPC300 Manuel utilisateur

VP-1HD FAQ

There is no picture on the presentation screen.

1. Check all connections again as shown in the user manual.

2. Verify the setting of the display output device; make sure it is set to the right

input/channel.

3. If you have a laptop connected to the document camera and cannot see the

desktop on the presentation screen, please make sure to set your laptop to dual

screen display mode.

4. Check the TV/RGB switch on the side of the camera and set it accordingly to your

display device type.

I have set up the VP-1HD and checked all the connections as specified in

the user manual but I cannot get a picture on the preferred presentation

screen.

1. The unit’s power button turns Red in standby mode. Press the POWER button

again to turn and the LED light will turn Green.

2. The default camera display resolution setting is on 1024X768. If your output

device does not support this resolution; Adjust the resolution dip switch on the

side of the document camera accordingly.

3. If your output device is a TV or any analog device, please switch the TV/RGB dip

switch to TV.

The picture on the presentation screen is out of focus.

1. Check your output device’s focus adjustment.

2. Press the auto focus button on your document camera’s control panel.

3. Power-cycle your camera.

There is no computer signal on the presentation screen.

1. Check all cable connections among the display device, VP-1HD and your PC,

replace cables if necessary.

2. Connect your PC to the VP-1HD first before you power on your computer.

3. Make sure to switch your Laptop to dual screen display mode by holding Fn and

repeatedly toggling the F5 key. For different command, please refer to your

laptop manual.

Can you use the AVervision software with the VP-1HD ?

1. Yes. The VP-1HD have a USB port therefore you can connect this camera to your

computer to use the Software.

Is there a light source on the VP-1HD ?

1. No. The VP-1HD does not have a built in lamp, it uses ambient light in your

environment.

The brightness on the presentation screen is dark and unreadable

1. Press the Brightness level control buttons on the control panel to adjust the

brightness.

2. Make sure there is sufficient lighting in the room.

3. Your projector’s bulb may need to be changed.