aventon LEVEL 2020 Manuel utilisateur
LEVEL OWNER’S MANUAL
AVENTON LEVEL OWNER’S MANUAL
Thank you for purchasing an Aventon Level ebike! Before riding,
please take a moment to review these instructions.
ASSEMBLY INSTRUCTIONS
To view the assembly instructions to your Aventon ebike, visit the
product page on our website, there you will find a step by step
assembly video. If you aren’t comfortable with the steps shown,
you can use a local bicycle shop or mobile repair and assembly
service, like Velofix, or Velotooler to assemble the bike for you.
We recommend Aventon Elite bike shops, you can find that list on
our website, but any qualified bike shop can help.
Need service or support? Visit our website (www.aventon.com) for
quick answers, manuals, and live chat support. Or give us a call
and we’ll find you a solution.
Aventon Bikes
18457 Railroad St
Industry, CA 91748
Phone: (866) 300-3311
Email: [email protected]
Version 1.1.1 (February 1, 2020)
Latest version can be found: www.aventon.com
CONTENTS
Display / Control Specifications
Getting Started
What’s on the Display?
Using the Controls
Customizing the Display
• Function 01P Backlight Brightness
• Function 02P Unit of Measure
• Function 03P Battery Voltage
• Function 04P Wheel Size
• Function 05P Speed Limit
Battery and Charging
Adjusting the Suspension Fork
Maintenance and Service
Safety
Safe Starting & Stopping
Error Codes and Troubleshooting
Battery Troubleshooting
Frequently Asked Questions
Notes
1
2
3
4
5
5
5
5
6
6
7
9
10
11
12
14
20
22
24
LEVEL OWNER’S MANUAL
1
DISPLAY / CONTROL SPECIFICATIONS
• 48 Volt Power Supply
• Current Rated: 10mA
• Maximum Operating Current: 30mA
• Power O Leakage Current < 1uA
• Operating Current to Controller: 50mA
• Operating Temperature: -18º to 65ºC
• Storage Temperature: -30º to 80ºC
Display Panel
Control Pad
(Side View)
(Side View)
LEVEL OWNER’S MANUAL 2
GETTING STARTED
The Level is operated using the control pad on the handlebars.
The control pad is located near the left-hand brake lever.
Press and hold the “M” button on the handlebar controls to turn
on the display. Now, your e-bike is ready to ride. To turn o, press
and hold “M” for 3 seconds.
The Level ebike oers pedal assist. When using pedal assist,
an electric motor supplements the rider’s own eort. To use the
pedal assist, simply start pedaling, then tap the “U” or “D” arrows
to increase or decrease the amount of pedal assist from levels
0-5. Pedal assist will engage at speeds up to 28 MPH / 45 KPH.
The Level ebike is equipped with a throttle, which is mounted
near the rider’s left thumb, to propel the bike without pedaling.
You can engage the throttle anytime the rear wheel is turning.
Once the bike is moving on throttle power, use your thumb to
control the speed of the bike. The throttle can propel you at
speeds up to 20 MPH.
The motor stops when you: stop pedaling, squeeze the brake
levers, or release the throttle. Simply start pedaling again to re-
engage the motor.
LEVEL OWNER’S MANUAL
3
WHAT’S ON THE DISPLAY
While you are riding, you can use the display to monitor your
speed, the amount of pedal assist, battery life remaining, and
other data.
As shown below, your Level uses a LCD display screen that looks
like this:
SPEED INDICATOR
(Current / Max / Average)
5 LEVELS OF ASSIST
(0: No Assist. 5: Max Assist)
WALK MODE
(On / O)
DISTANCE INDICATOR
(Current Trip / System Mileage)
ERROR CODE INDICATOR
(In the Event of a Problem)
BACKLIGHT INDICATOR
(On / O)
BATTERY LEVEL INDICATOR
(Displays Battery Charge Level)
VOLTAGE OUTPUT INDICATOR
(Real-Time)
LEVEL OWNER’S MANUAL 4
USING THE CONTROLS
To turn on your bike, press and hold the “M” button for 3 seconds.
To turn o, press and hold the “M” button for 3 seconds. The
display and battery have an energy-saving feature, if there is no
activity for 10 minutes, they will turn o automatically to preserve
battery life.
Tap the “U” or “D” arrows to change the level of pedal assist.
Hold “U” and “M” for 3 seconds to switch between showing real-
time speed, average speed, and max speed.
Tap “M” to toggle between the display of the Odometer, Trip
Distance, Voltage, and Elapsed Time.
Press and hold “U” for 3 seconds to enable the backlight on the
display. Press and hold “U” again for 4 seconds to turn it o.
To enable walk mode, first come to a complete stop and stand
next to the bike. Press and hold “D” for 3 seconds. The bike will
slowly move forward at 3.5 MPH / 6 KPH as long as you hold the
“D” button. This feature is useful for pushing the bike up a hill or
walking through a crowd, where you cannot safely ride.
To use the walk mode, set the pedal assist to level 1 - 5. Walk
Mode will not engage at pedal assist level 0.
LEVEL OWNER’S MANUAL
5
CUSTOMIZING THE DISPLAY
You can use the settings features of the display to customize the
Level for your use. To enter the “Settings” mode, hold the “U” and
“D” buttons at the same time for 2 seconds.
You can customize 4 out of the 5 dierent functions on the
display. Tap the “M” button to move from function to function, and
use the “U” and “D” arrows to adjust each to your preferences.
When you are finished, press and hold the “M” button to
save your changes. Note: The system will save your changes
automatically after 8 seconds.
FUNCTION 01P - BACKLIGHT BRIGHTNESS
You can control how bright you’d like the display backlight
to be. 1 being the dimmest and 3 is the brightest.
FUNCTION 02P - UNIT OF MEASURE
You can toggle between miles or kilometers, based on your
preference.
FUNCTION 03P - BATTERY VOLTAGE
This function sets the battery voltage of the system. On the
Level, this function is locked at 48V to match the battery
and motor, and cannot be changed.
LEVEL OWNER’S MANUAL 6
FUNCTION 04P - WHEEL SIZE
This function can be used to change the wheel size to
16, 18, 20, 22, 24, 26, 27.5, or 28” wheels. The Level
comes stock with 27.5” wheels, which is the default and
recommended setting. Note: Selecting the incorrect
wheel size will aect the accuracy of the bike’s speed, the
odometer, and the functionality of its pedal assist.
FUNCTION 05P - SPEED LIMIT
The Level is a Class III ebike. This designation carries a
pedal assist limit of 28 MPH (45 KPH). You can pedal faster
without assist, but the motor will stop providing assist
when the speed limit is reached. You can use the Speed
Limit function to change the speed limit based on your
preferences and the law in your area. The Speed Limit
function can be set from 20-51 KPH (for reference, that is
12.4 - 31.7 MPH) and is always set in KPH. You should only
set the Speed Limit to a value that is safe and legal in your
community. This function does not aect the max speed on
throttle, which is locked at 20 MPH (32 KPH).
LEVEL OWNER’S MANUAL
7
BATTERY AND CHARGING
The Level uses a Lithium-Ion battery which can be charged on
or o the bike. We recommend charging the battery indoors, in
moderate temperature conditions. To charge the battery, plug the
charger into the charging port and then connect the charger to a
wall outlet. The LED indicator light will be red when charging and
will turn green when charging is complete. When finished, unplug
the the charger from the wall outlet.
Take care of the battery to ensure a long service life:
• Charge and store the battery indoors if possible. The
battery can be removed from the bicycle for this purpose.
• Avoid extreme hot and cold temperatures.
• DO NOT submerge your bike or any of the components in
water. This action will void the warranty.
To optimize the performance of the battery over time, try and use
it (discharging and charging) at least monthly. But if you won’t
be riding your Level for a long period of time, it’s best to store
the battery fully charged. After many charging and discharge
cycles, runtime and range will be reduced. Replacement batteries
are available from Aventon to extend the life of your ebike. The
lifespan of the battery is about 500 charge / discharge cycles.
When you install the battery on the Level, lock it into place with
the supplied key. To remove the battery, turn the key to the
unlock position. Rotate the battery release knob in order for the
battery to drop free. Do not ride the bicycle if the battery rattles or
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels aventon Scooter
aventon
aventon PACE 500 Manuel utilisateur
aventon
aventon Level Manuel utilisateur
aventon
aventon PACE 350 Manuel utilisateur
aventon
aventon SINCH Manuel utilisateur
aventon
aventon POWER SHARE CTS36ABU1 Guide de l'utilisateur
aventon
aventon SINCH Manuel utilisateur
aventon
aventon SINCH 2020 Manuel utilisateur
aventon
aventon SINCH ST Manuel utilisateur
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur