Automatic Technology Toro GDO-10v2 Manuel utilisateur

GDO-10v2 ToroTM

Roll Up Garage Door Opener

INSTALLATION INSTRUCTIONS | OWNERS COPY

Featuring TrioCode™Technology

Technical Document

Installation Manual

v1.01

14 Dec 2011

English

Part # 13248(Manual)

2GDO-10V2 Toro™Owner Installation Instructions

WARNING: It is vital for the safety of persons to follow all

instructions.Failuretocomplywiththeinstallationinstructions

and the safety warnings may result in serious personal injury

and/or property and remote control opener damage. Please

save these instructions for future reference.

Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all

conditions or warranties, statutory or otherwise which may be implied by laws as conditions or warranties of purchase of

an Automatic Technology Australia Pty Ltd Garage Door Opener. Automatic Technology Australia Pty Ltd hereby further

expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever suffered by any person as a

result whether directly or indirectly from failure to install the Automatic Technology Australia Pty Ltd Garage Door Opener

in accordance with these installation instructions.

Owner Installation Instructions GDO-10V2 Toro™3

Important Safety Instructions 4

Features 6

Controllers Input And Output 8

Operating Controls 9

Package Contents 10

Pre-installation Requirements 11

Installation 12

EasyBeam™ Installation 14

Programming The Opener 15

Menu Structure 15

Viewing And Editing Parameters 16

Setting Limits 17

Setting Limits: Via Transmitter 18

Safety Obstruction Force 19

Safety Obstruction Force Test 19

Adjusting Safety Obstruction Forces 20

Coding Transmitters 21

Transmitter Editing 22

Transmitter Management 24

Remotely Coding Transmitters 26

Setting Pedestrian Position 27

Standard Operating Modes 27

Control Board Adjustments 29

Time Clock 34

Diagnostic Tools 36

Memory Tools 38

Accessories 38

Lock 38

Light 39

Auto-Close Mode 40

Wall Transmitter Installation 41

SmartSolar™ Installation 42

Replacing Backup Batteries 43

Speciﬁcations 44

Troubleshooting 45

Maintenance 46

Spare Parts 47

Warranty 48

GDO-10v2 Toro™

Roll Up Garage Door Opener

4GDO-10V2 Toro™Owner Installation Instructions

CAUTION: If your garage has no pedestrian entrance door, an emergency access device should be installed.

This accessory allows manual operation of the garage door from outside in case of power failure.

Photo Electric Beams must be installed with the automatic opener ensuring additional safety and peace

of mind.

DO NOT operate the opener unless the garage door is in full view and free from objects such as

cars and children/people. Make sure that the door has ﬁnished moving before entering or leaving

the garage.

DO NOT operate the opener when children/people are near the door. Children must be

supervised at all times when the opener is in use. Serious personal injury and/or property

damage can result from failure to follow this warning.

DO NOT allow children to operate the opener. Serious personal injury and/or

property damage can result from failure to follow this warning.

Regularly check to make sure that the Safety Obstruction Force is working

correctly, and is tested and set as per page 19 of this manual. Failure to follow

these instructions could result in serious personal injury and/or property

damage. This test must be repeated at regular intervals and the necessary

adjustments made as required.

The PE Beams must be used, if the closing force as measured on the

bottom of the door is over 400N (40kg).

DO NOT disengage the door opener to manual operation with

children/people or any other objects including motor vehicles

within the doorway.

The door opener is not intended for use by young children

or inﬁrm persons without adequate supervision. Children

should be supervised to ensure that they do not play with

the remote transmitters or the opener.

Keep hands and loose clothing clear of the door and

door opener at all times.

The unit should be installed so that it is protected

from the elements. It should not be exposed to

water or rain. It is not to be immersed in water

or sprayed directly by a hose or other device.

WARNING: It is vital for the safety of people to follow all

instructions. Failure to comply with the following Safety

instructions may result in serious personal injury and/or

property damage.

Important Safety Instructions

Owner Installation Instructions GDO-10V2 Toro™5

The garage door must be well balanced. Sticking or binding doors must be repaired by a qualiﬁed garage door

installer prior to installation of the opener.

Frequently examine the installation for signs of wear, damage or imbalance. DO NOT use if repair or

adjustment is needed since a fault in the installation or an incorrectly balanced door may cause injury. DO

NOT attempt to repair the door yourself as hardware is under extreme tension.

Remove or disengage all garage door locks and mechanisms prior to installation of the opener.

Connect the opener to a properly earthed general purpose 240V mains power outlet installed by a

qualiﬁed electrical contractor.

Disconnect the power cord from mains power and backup batteries before making any repairs

or removing covers. Only experienced service personnel should remove covers from the

opener.

When using Auto-Close mode, a photo electric beam must be ﬁtted correctly and tested

for operation at regular intervals. Extreme caution is recommended when using Auto-

Close mode. All safety rules must be followed.

In order for the opener to sense an object obstructing the door way, some force

must be exerted on the object. As a result the object, door and/or person may

suffer damage or injury.

If the power supply cord is damaged, it must be replaced by an Automatic

Technology service agent or garage door professional.

Make sure that the door is fully open before driving in or out of the

garage and fully closed before leaving the driveway.

Make sure that remote controls are kept out of reach of children.

Install the wireless wall control unit in a location where the

garage door is visible, at a height of at least 1.5m, out of the

reach of children and with the garage door is visible.

Important Safety Instructions

6GDO-10V2 Toro™Owner Installation Instructions

Operation

To open or close the door simply press the open or close button on the wall

control unit, a button on a coded TrioCode™ hand held transmitter, optional wall

mounted transmitter, or optional wall switch for two seconds. During open and

close cycles, the door can be stopped by pressing the button again or by pressing

the stop button on the wall control unit.

TrioCode™ Code Hopping Technology

Every time a TrioCode™ transmitter is used, a new security code is randomly

generated from over 4.29 billion possibilities. This greatly enhances the security of

the system and makes “code grabbing” a thing of the past.

These transmitters also overcome interference issues by simultaneously sending a

signal over three slightly different frequencies. Even if two of the three signals are

jammed, the system will still work.

M-ALPS (Magnetic Automatic Limits Positioning System)

M-ALPS does away with manual adjustment of the door’s limits position using mechanical

parts, such as cams and microswitches. During installation the hand held transmitter can be

programmed to set the door limit positions.

ISS (Intelligent Safety Obstruction System)

While the door is performing a close cycle, should it hit an obstacle or be restricted in some manner, it

will automatically reverse. The amount of force the door should encounter before reversing is automatically

adjusted by the doors control system during the initial installation of the automatic door opener. The door will

also stop if restricted whilst opening. The Safety Obstruction Force should be checked monthly.

Auto Courtesy Light

The courtesy light (if connected) comes on automatically for one minute whenever the door is activated. The

light can also be operated independently of the door by coding a dedicated button on a transmitter.

Features

Thank you for purchasing the Automatic Technology

Toro™ Automatic Garage Door Opener. Designed

by our renowned engineers to suit roll up doors, the

Toro™ will provide years of smart, simple & secure

convenience to your home.

Owner Installation Instructions GDO-10V2 Toro™7

SmartSolar™ Compatibility (Optional)

The opener can be ﬁtted with a SmartSolar™ kit (Part Number 60142) for operation

where mains power access is not available. NOTE: If the door is the only entrance to

the garage, a keyed cable release should be ﬁtted external to the garage.

Vacation Mode

A hand held transmitter can be programmed to lock and unlock all other

transmitters that have been programmed into the openers’ memory. The Vacation

Mode can be used when the door is left idle for long periods of time.

Pet/Pedestrian Mode

The transmitter can be programmed to open the door to an adjustable partial height

so that the family pet can enter and exit the garage at any time. You may also wish to

open the door to a height suitable only for pedestrian access.

Auto-Close Mode

The opener can be programmed to automatically close after an open cycle. The Auto-Close

time is adjustable. It is compulsory to install PE Beams if this mode is selected, otherwise the

door may cause personal injury or damage to property.

Photo Electric (PE) Beams

The opener has an input to connect PE Beams for extra safety and use of the Auto-Close mode.

Manual Operation

The opener is equipped with a unique patented manual disengaging device. If the power to the opener is

disrupted for any reason, the door can be put into manual mode by pulling down on the string handle, then

releasing. This will allow you to manually open or close the door. When power is restored, by pulling down on

the string handle and releasing, the opener is put back into automatic mode.

8GDO-10V2 Toro™Owner Installation Instructions

Controller Input And Outputs

Light Relay Output N/O, Com, N/C Contact

Lock Relay Output N/O, Com, N/C Contact

Serial Interface Connector

Programmer PG-3 Connector

12 volts 6 Amp - Hr Batteries

Engage/Disengagement Handle

Standby Battery Charger/Solar Connector

ﬁg

Solar Shunt

Standby Battery Shunt

Motor Connector

10 Amps Slow Blow Fuse

24 Volts Ac In Connector

Position Sensor Connector

Owner Installation Instructions GDO-10V2 Toro™9

14 22

19 18

Terminal Block ( From Left To Right )

V+ Three Wire PE Beams “ + “ Supply

IN3 Three Wire PE Beams Trigger Input

V- Common For Two Wire EasyBeam™ and Three

Wire PE Beams

IN2 Two Wire EasyBeam™ Input

AUX OUT Receiver’s Auxiliary Output

FIRE N/O , N/C Input Terminal

GPI N/O Input Terminal

OPN N/O , N/C Input Terminal

STP N/O , N/C Input Terminal

CLS N/O Input Terminal

SWP N/O Input Terminal

COM Terminal For Inputs

Programmer PG-3 Input

Console Previous Button

Liquid Crystal Display

Console Next Button

Console Open Button

Console Stop Button

Console Set Button

Console Close Button

14 15

ﬁg

Operating Controls

10 GDO-10V2 Toro™Owner Installation Instructions

Package Contents

GDO-10v2 Toro™ Drive Unit 1

Wall Control Unit 1

Network Cable 1

Accessory Guide Pack 1

Fork Extension Pack 3

TrioCode™ Keyring Transmitters 2

Installation Manual 1

Locking Bar Covers 2

EasyBeam™ with wires and brackets 1

ﬁg

Table des matières

Autres manuels Automatic Technology ouvre-porte de garage

Automatic Technology

Automatic Technology GDO-6v4 EasyRoller Manuel utilisateur

Automatic Technology

Automatic Technology ATS Series Manuel utilisateur

Automatic Technology

Automatic Technology Axess Pro Series 1101 Manuel utilisateur

Automatic Technology

Automatic Technology iOpener RD40 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-8V2 EasyRoller II Manuel utilisateur

Automatic Technology

Automatic Technology GDO-11v1 Ero Guide de démarrage rapide

Automatic Technology

Automatic Technology GDO-8 Shed Master Manuel utilisateur

Automatic Technology

Automatic Technology GDO-6 v2 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-11 Ero Manuel utilisateur

Automatic Technology

Automatic Technology GDO-11v1 SecuraLift Manuel utilisateur

Automatic Technology

Automatic Technology GDO-9v2 Enduro Gen 2 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-9 ENDURO GEN2 Guide de planification

Automatic Technology

Automatic Technology GDO-8 Shed Master Manuel utilisateur

Automatic Technology

Automatic Technology GDO-2 SecuraLift Manuel utilisateur

Automatic Technology

Automatic Technology GDO-2 SecuraLife Manuel utilisateur

Automatic Technology

Automatic Technology SecuraLift Rhino Manuel utilisateur

Automatic Technology

Automatic Technology Hiro GDO-12V1 Manuel utilisateur

Automatic Technology

Automatic Technology GDO-9v2 SecuraLift Manuel utilisateur

Automatic Technology

Automatic Technology GDO-11V3 Ero Manuel utilisateur

Automatic Technology

Automatic Technology GDO-6v3 EasyRoller Manuel utilisateur

Automatic Technology

Automatic Technology GDO-8v1 EasyRoller II Manuel utilisateur

Automatic Technology

Automatic Technology NeoSlider TrioCode 128 NES-500 Manuel utilisateur

Automatic Technology

Automatic Technology SECURALIFT Guide de démarrage rapide

Automatic Technology

Automatic Technology 62717 Manuel utilisateur

Manuels ouvre-porte de garage populaires d'autres marques

Dorma

Dorma ES 90 Manuel utilisateur

Garaga

Garaga SECURITY+ 3265GCM 1HP Manuel utilisateur

Chamberlain

Chamberlain Whisper Drive SECURITY+ WD822K Series Manuel utilisateur

Chase Doors

Chase Doors DuraShield Manuel utilisateur

CSI

CSI Classic Manuel utilisateur

HATO

HATO 120 Manuel utilisateur

Chamberlain

Chamberlain Elite 3575S Manuel utilisateur

Richmond

Richmond GTR156 Manuel utilisateur

Raynor

Raynor 1280RGD Manuel utilisateur

CAME

CAME F4000 Series Manuel utilisateur

B&D

B&D Controll-A-Door 5 Manuel utilisateur

BFT

BFT PRV AA SL Manuel utilisateur

Craftsman

Craftsman 139.53924 Manuel utilisateur

Chamberlain

Chamberlain MyQ 940ESTD Manuel utilisateur

Westfalia

Westfalia 19 36 07 Manuel utilisateur

Chamberlain

Chamberlain HD520EVP Manuel utilisateur

Cardin

Cardin BL Series Manuel utilisateur

Chamberlain

Chamberlain 8355 - 1/2 hp Manuel utilisateur