ATMTECH TPUH406T-EU Manuel utilisateur
TPUH406T-EU
4K Wallplate HDBaseT Transmitter
All Rights Reserved
Version: TPUH406T-EU_2017V1.1
User Manual
4K Wallplate HDBaseT Transmitter
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual is for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction only. The functions described in this
version are updated till September 6, 2017. In the constant effort to improve our
product, we reserve the right to make functions or parameters changes without notice
or obligation. Please refer to the dealers for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class Adigital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
4K Wallplate HDBaseT Transmitter
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4K Wallplate HDBaseT Transmitter
Contents
1. Introduction.................................................................................................................1
1.1 Introduction to TPUH406T-EU...........................................................................1
1.2 Feature..............................................................................................................1
1.3 Package List......................................................................................................2
2. Specification ...............................................................................................................3
3. Panel Description........................................................................................................4
3.1 Front Panel........................................................................................................4
3.2 Rear Panel.........................................................................................................5
3.3 Side Panel.........................................................................................................6
4. System Connection.....................................................................................................7
5. Button Control.............................................................................................................9
6. RS232 Control............................................................................................................9
6.1 RS232 Connection ............................................................................................9
6.2 RS232 Control Software..................................................................................10
6.3 RS232 Command............................................................................................12
6.3.1 Control Mode Switching.........................................................................12
6.3.2 Signal Switching....................................................................................12
6.3.3 VGA Scaling Configuration....................................................................12
6.3.4 HDCP Compliance ................................................................................13
6.3.5 VGA Image Adjustment .........................................................................13
6.3.6 EDID Configuration................................................................................15
6.3.7 Device Configuration.............................................................................15
7. Panel Drawing ..........................................................................................................16
8. Troubleshooting & Maintenance ...............................................................................17
9. Customer Service .....................................................................................................18
4K Wallplate HDBaseT Transmitter
1
1. Introduction
1.1 Introduction to TPUH406T-EU
TPUH406T-EU is 2x1 wallplate HDBaseT Transmitter for switching and extending
HDMI or VGA+ audio input to display or projector, and the transmission distance is up
to 40m@4K and 70m@1080p over a single Cat5e/6/7 cable based on Certified
HDBaseT technology. The resolution of HDMI input is up to 4K/UHD@ 60Hz 4:2:0 and
VGA input up to 1920x1200.
TPUH406T-EU is ideal for huddle rooms, classrooms and small conference rooms. The
wall‑mountable design provides the convenience of placing input connections precisely
where they are needed.
1.2 Feature
Features one HDMI input and one VGA input with 3.5mm analogue audio input.
Supports HDMI signal up to 4K@60Hz 4:2:0, VGA input signal up to 1920 x 1200.
Built-in scaling function to match signals to display native resolution.
Ensures display of content-protected media and interoperability with other HDCP
compliant devices.
Audio signal can be selectively embedded into the video output.
HDBaseT technology extend HDMI and VGA, Audio, control signals up to 70m
over CATx cable.
Automatically detect active inputs when sources are connected.
Flexible control options for compatibility with third-party system, matrix switcher or
receiver.
Supports bi-directional RS232 pass-through with HDBaseT connection and local
control.
PoH (power over HDBaseT) allows powering from the receiver at the display end.
Provides power supply for devices like WP8 Control Panel.
Supports IR pass-through.
4K Wallplate HDBaseT Transmitter
2
1.3 Package List
1 x TPUH406T-EU 4K Wallplate HDBaseT Transmitter
1 x 2-pin Pluggable Terminal Block
1 x 4-pin Pluggable Terminal Block
1 x User Manual
Note
:
Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
4K Wallplate HDBaseT Transmitter
3
2. Specification
Input & Output
Input
(1) HDMI; (1) VGA; (1) AUDIO; (1) 12V POWER ;
Input Connector
(1) 19-pin Type A female HDMI; (1) HD-15 VGA; (1)
3.5mm mini jack; (1) 2-pin Pluggable Terminal Block
Output
(1) HDBaseT; (1) 12V POWER
Output Connector
(1) RJ45; (1) 2-pin Pluggable Terminal Block
Transmission Mode
HDBaseT
Control Parts
Control Ports
(1) FIRMWARE; (1) RS232
Control Connector
(1) Micro USB; (1) 3-pin Pluggable Terminal Block
General
Video Resolution
VGA - up to 1920 x 1080@60Hz;
HDMI - up to 4K/UHD@ 60Hz 4:2:0
Audio Impedance
＞10Ω
Frequency Response
20Hz~20KHz
SNR
>85db@20Hz~20KHz
Transmission Distance
1080p ≤ 70M; 4Kx2K ≤ 40M
Bandwidth
10.2Gbps
HDMI Standard
Support HDMI1.4 and HDCP complaint
External Power Supply
Input:100V~240V AC; Output: 12VDC 2A
Max Consumption
9.6W
Operation Temperature
-10 ~ +40℃
Storage Temperature
-15 ~ +55℃
Relative Humidity
10% ~ 90%
Dimension (W*H*D)
151mm x 80mm x 44mm
Net Weight
258g
4K Wallplate HDBaseT Transmitter
4
3. Panel Description
3.1 Front Panel
No.
Name
Description
①
LED indicator
POWER: Glows red when power is applied.
LINK: Glows green when an HDBaseT link is established.
VGA: Glows green when the VGA input is active, amber
when a source is available, and off when there is no source
connected.
HDMI: Glows when HDMI input is active, amber when a
source is available, and does not light when there is no
source connected.
②
RESET
This button performs a soft reboot of the TPUH406T-EU.
③
VGA IN
VGA input connector, connect with VGA source.
④
AUDIO IN
3.5mm stereo audio connector supplies audio for the VGA
input.
⑤
IR
Built-in IR sensor to receive IR signal from IR remote.
⑥
HDMI IN
HDMI input connector, connect with HDMI source.
⑦
SOURCE/AUTO
Backlight Button.
Press this button to switch input signal manually
between HDMI and VGA sources.
VGA IN AUDIO IN
HDMI IN SOURCE/AUTO
LINK
VGA
HDMI
IR
RESET
3
6
57
4
1
2
4K Wallplate HDBaseT Transmitter
5
Press and hold this button 3 seconds, the LED turn
green to enter auto-switching mode. Press and hold
again can exit this mode.
3.2 Rear Panel
No.
Name
Description
①
HDBT OUT
(PoH IN)
HDBaseT output, connects with HDBaseT Receiver over a
single Category cable to deliver AV signals, support PoH.
②
IN
12V input, connects with power adapter.
③
OUT
12V output, connects with WP8 Control Panel to energize it.
④
RS232
Serial port for control TPUH406T-EU or the third-party device
via RS232 commands. Please refer to the 5. RS232 Control
for more details.
Tx Rx12V 12V
RS232
IN OUT
PoH IN
HDBT OUT
34
1
2
4K Wallplate HDBaseT Transmitter
6
3.3 Side Panel
No.
Name
Description
①
FIRMWARE
Micro-USB connector used for firmware update.
FIRMWARE
1
Table des matières
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
