Atlantis Air Press Series Mode d’emploi

User Manual &

Warranty Card

CAUTION:

Before using the Hot Beverage Dispenser, read this manual and follow all safety rules and

operating instructions.

HOT BEVERAGE

DISPENSER

Premix Based:

Recipe Based:

Micro - 2 Lane

Café Mini - 2 Lane

Café Plus - 3/4 Lane

Air Press Series - 2/4 Lane

Select (Multi Option)

Disclaimers:

Accessories shown are not part of the standard product package.

Actual design, colour and speciﬁcation may vary from the sketches shown.

The picture is used for representation purpose only.

Note: The Machine speciﬁcations are subject to change without notice.

Current Publicaon in March 2021

First Published in March 2016

Manufactured By

THE VENDING COMPANY

Plot No - 28, Sector- 4, IIE, Sidcul, Pantnagar,

Rudrapur - 263153, Uttarakhand (INDIA)

Call : 70600 02944

Marketed By

VENDING UPDATES INDIA PVT. LTD.

B-23, Sector - 88, Phase II, Noida - 201305,

District Gautam Budh Nagar, Uar Pradesh (INDIA)

Plot No. - 35, Sector -155, Noida - 201310,

District Gautam Budh Nagar, Uar Pradesh (INDIA)

Customer Care

Email: service@atlansplus.com

Call : 85888 25888

Contents

Leer from the company

Product features

Introducon - Models

General speciﬁcaons

Installaon of machine

Connecng the electricity supply

Programming of 2 Lane Atlans

Programming of 3/4 Lane Atlans

Programming of Select Atlans

Programming in Atlans Micro

Operaon guideline

Beverage dispensing

Daily cleaning operaon

Daily canister ﬁlling/jar changing operaon

Descaling

Service guidelines

Exploded views with part’s name

Part replacement process of all crical components

Disposal of the machine

Dos & Don’ts

Warranty Card

S. No. Page No.

Leer from the company:

Please be sure to follow the instrucons in the

operaonal guideline to make the necessary sengs.

USER’S MANUAL

Please read the User

manual prior to using

the machine.

Congratulaons on the purchase of your Atlans hot beverage dispenser.

You will be impressed by its design, durability,

ease of use and the quality of the beverage

dispensed.

The is a fully automac Atlans hot beverage dispenser

dispensing machine. Each beverage is freshly prepared

at the press of a buon which guarantees high quality

of drink. User control of the machine is possible via a

touch-pad switch.

Keep these instrucons near the hot beverage machine

so that you and your operang staﬀ have the required

informaon handy and can take the correct acon in

the event of any technical problems. In the event of any

service maer see

service manual.

Ensure staﬀ access to

user manual !

Compact Design

Product Feature:

Designed to suit Indian climatic condions

Funcon Indicang LCD display

Thermal protecon for over heat

Suitable for Single Phase Operaon

Climate

Heat Fair Fall Snowfall

LCD

HOT BEVERAGE DISPENSER

MODELS DESCRIPTION

2 Lane Hot Premix Based Beverage Dispenser

3/4 Lane Hot Premix Based Beverage Dispenser

Select (7 Opons) Recipe Based Mul Opon Hot Beverage Dispenser

Introducon Models:

2/4 Lane Air Press Series Hot Premix/Recipe Based Beverage Dispenser

Micro Hot Premix Based Beverage Dispenser

USER’S MANUAL

General Specications:

Power Supply

Machine Dimension

(W*D*H) (mm)

Net Weight (kg)

Serving Options

Continuous Dispensing Of

100ml Servings

Dispensing Rate (cups/min)

Product Serving Temperature

Water Supply -input Options

Cleaning Cycle

Power Consumption

Current

Operating Method

Boiler Capacity

Heater Element (capacity Kw)

Quantity Of Canisters

Capacity of Canisters

Parameters

Image

Features

Specications

Category

110V/230V-60Hz/50Hz-1ph

320 X 365 X 640

2 Options+ Hot water

21 cups

3 cups/min

72~84 deg C

Bubble top/Pump/Online

Automatic

2000 W

9.8 A

Key pad

3 Ltr.

2000 W

1.1 kg

110V/230V-60Hz/50Hz-1ph

285 X 350 X 465

5.5

2 Options+ Hot water

8 cups

1 cup/min

72~84 deg C

5 ltr. manual lling

Manual

500 W

2.3 A

Key pad

1 Ltr.

500 W

1.1 kg

110V/230V-60Hz/50Hz-1ph

320x477x640

18.4

4 Options + Hot Water

21 cups

3 cups/min

72~84 deg C

Bubble Top/ Pump/Online

Automatic

2000 W

9.8 A

3 Ltr.

2000 W

1.1 kg

110V/230V-60Hz/50Hz-1ph

320 X 477 X 640

19.3

7 Options

21 cups

3 cups/min

72~84 deg C

Bubble Top/ Pump/Online

Automatic

2000 W

9.8 A

Key pad

3 Ltr.

2000 W

1.1 kg

110V/230V-60Hz/50Hz-1ph

320 X 477 X 640

16.8/18.4

3/4 Options + Hot Water

21 cups

3 cups/min

72~84 deg C

Bubble Top/Pump/Online

Automatic

2000 W

9.8 A

Key pad

3 Ltr.

2000 W

3/4

1.1 kg

2 Lane Select

4 Lane

Air Press

3/4 Lane 2 Lane

Air Press

Micro

110V/230V-60Hz/50Hz-1ph

320 X 365 x 640

2 Options+ Hot water

7 cups

1 cup/min

72~84 deg C

Bubble top/Pump/Online

Automatic

700 W

3.2 A

Sensor based contact less dispenser

2 Ltr.

700 W

1.1 kg

1. Installaon Guidelines:

1.1 Locang the Machine:

1.2.1 Open the front door using the key provided. Remove all transit packing

and the installaon kit from the machine. Check for visual signs of damage which

may have occurred during transit. If the machine is damaged or any parts are

missing, you must contact authorised seller immediately.

1.1.1 The machine is suitable for indoor use only,

sited in an area with a recommended ambient

temperature not below 10° C and not exceeding

35° C. (image a)

(Image a)

1.1.2 Prior to moving the machine to its locaon, ensure

that there is suﬃcient access to ensure adequate

venlaon. 100 - 150 mm (4-6 inches) clearance must be

allowed between the back of the cabinet and the wall.

(Image b)

1.1.3 Ensure that the machine is situated on

a strong horizontal surface (See Speciﬁcaons table),

at a convenient height and in a posion where it is not

likely to be unstable. (Image c)

(Image c)

1.2 Installaon of Machine

1.2.2 The machine should be situated within one metre of

a drinking water supply from a rising main in case of pump.

Water Supply

by Jar

Water Supply

by RO

Plug

HOT BEVERAGE DISPENSER

1.2.3 Firstly break the seal of the potable drinking water

jar/source. Overturn the water bole on top of the

machine carefully to avoid air lock/vacuum venng,

1. 2.4 Remove the plug while changing the jar.

1.4 User Programming Mode:

1.4.1 Programming of Atlans 2 Lane

USER’S MANUAL

1.3.1 The machine must be connected to a 230 Volt 50Hz 6/16

amps switch socket outlet.

Aenon!

Risk to user!

1.3. Connecng the Electricity Supply:

The Atlans 2 Lane is a fully programmable machine which can be customized to the

customer's requirements. Please follow the simple instrucons below to program

your machine:

Press the STOP switch for 3 seconds and the machine enters the programming mode.

Now we would be using the COFFEE, TEA and HALF buons to program the machine.

Image (A)

A - Disconnected Condion B - Connected with 6/16 A

Important: If the power cord becomes damaged in any way it

must be replaced by a special lead available from the

manufacturer.

Immediately as we enter the programming mode, the display would show PREMIX

1 3.75. This indicates the dispensing me in seconds for the premix from the

canister 1. There would also be a cursor under the number before the decimal.

The COFFEE and TEA buons can be used to increase or decrease this number. Once

done, press the HALF buon and the cursor would then move to the digit aer the

decimal point. The HALF buon would hence forth play the role of an ENTER buon.

Press HALF (enter) again and the display would show WATER 1 6.0.

Follow the procedure to change the quanty of water in the drink 1 side as above.

HOT BEVERAGE DISPENSER

Press HALF again and the machine display shows “returns to the regular MAKE

YOUR CHOICE mode”.

Lastly pressing HALF would show CHANGE PASSWORD. Press TEA or COFFEE and

the YES opon appears. Press HALF again and ENTER the old password followed

by the new password twice.

Press HALF again and we have the USER MESSAGE change opon. Using the

COFFEE, TEA and HALF buons (for saving) you can actually change the name on

the display to your choice. A unique feature only on ATLANTIS machines.

Press HALF and the screen would show CNTR RESET. Pressing COFFEE

TEA would show YES then you have to enter the password and the counters of B1

and B2 would be reset to 0.

Next mode on pressing HALF is the SET DEFAULT opon. If you enable the same by

impung YES, then all sengs of water, powder, temp etc would be restored to the

factory sengs (password and user message remain same).

The default password is currently entered by pressing half 5 mes no number needs

to be entered.

Press HALF again and the display shows TEMP 82. Again this can be adjusted

(to a maximum of 90 degree) by using the coﬀee and tea (up and down) switches.

Press Half again and we now enter the SET FLUSH mode. Here we have the

following opons (all available using the COFFEE/TEA switches). If we want to ﬂush

the machine at regular intervals, especially when not in use, then we should

enable – YES this opon.

Press HALF again and the display would show ENABLE COIN. (Only applicable to token

operated machine.) Using the COFFEE and TEA we can enable – YES or disable the

token mechanism – NO.

Press HALF buon again and the display show HOT WATER 6.0. This is the quanty

of water which is dispensed when we push the HOT WATER buon. The quanty

can be adjusted by using the COFFEE and TEA buons and saved by pressing the

HALF buon as above.

Press HALF again for WATER 2 (water from the drink 2 side). Make changes as above.

Note that the seng for WATER would always be 1.0 sec more than the respecve

premix. This would ensure that the water would always ﬂow more than powder and

not allow accumulaon if powder in the mixing bowl.

Press HALF and the display would show PREMIX 2 3.75. This refers to the quanty

of premix from canister 2 dispensed. Changes can be made as above.

USER’S MANUAL

1.4.2 Programming of Atlans 3/4 Lane:

The 3 and 4 lane machines are programmed in a very similar manner to the Atlans 2 Lane.

The main diﬀerences have been highlighted.

1.4.3 Programming of Atlans Select:

Black

Coﬀee Café

Lae

Cappuccino Hot

Chocolate Hot

Milk

Tea

Premix

STOP

Mochaccino

Image (B)

Image (C )

Press stop switch for 3 sec and machine will enter the programming mode.

Now screen will show “SET DRINKS? : NO” , Press Key 1 (Black Coﬀee) key for YES; Then it

will show message Select Drink on the screen.

Now select required Bev; Bev1, Bev2, Bev3, Bev4, Bev5, Bev6, Bev7 which seng we want

to change by pressing their respecve key.

Note: Programming of the AIRPRESS series dispensers is same as the

regular café series dispensers, and can be done by holding your hand

in front of the sensors, just like you would press the buons on a

regular machine.

The ﬁve buons are named BEV 1, BEV 2, BEV 3, BEV 4, STOP. BEV 1 and BEV 2 buons

does the same funcon as the COFFEE/TEA buon to increase/decrease me and toggle to

enable or disable funcons. BEV 3 is the equivalent of the HALF buon in the 2 lane Café

mini and is primarily for saving and moving on to next mode. In the Café Plus, to get hot

water or half cup, just press the STOP buon once and then the BEV buon of your choice

to get hot water/half cup of drink from that lane. A longer press of the STOP buon and you

can enter the MENU mode and follow the same instrucons as the Café Mini programming.

For example by selecng Bev 1 it will show COFE WTR:06.00 which is the me for which

water from lane 1 is dispensed. This can be increased by pressing key 1 (Black Coﬀee) and

decreased by pressing key 2 (Coﬀee Lae) and saved by key 3 (Cappuccino). Post saving the

display will show COFE PDR: 02.00 we can increase and decrease the coﬀee powder

quanty as given above key 1 for increase and key 2 for decrease and save by key 3.

Post saving display will show COFE DLY: 02.00 here DLY stand for the providing a me delay

to powder from starng of the water.

This powder delay can be increased and decreased as above.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Atlantis Distributeur automatique

Atlantis

Atlantis Cafe Mini Series Mode d’emploi

Manuels Distributeur automatique populaires d'autres marques

Godrej

Godrej Minifresh 2000 Manuel utilisateur

LAUREL

LAUREL 300 Instructions d'installation et d'utilisation

Macas

Macas MACES7C-300-90-00 Series Manuel utilisateur

Dixie Narco

Dixie Narco SIID Manuel d'utilisation

VendNet

VendNet CB500-SA Manuel utilisateur

FAS International

FAS International FASTER TMT Manuel utilisateur

Three Square Market

Three Square Market Kiosk Manuel utilisateur

Seaga

Seaga JDL-2 COMBO Instructions de construction

Fastcorp

Fastcorp F820 Instructions de construction

Coinco

Coinco BillPro Manuel d'utilisation

Intralot

Intralot OHIO MPNG Manuel utilisateur

LAVAZZA

LAVAZZA KLIX Series Manuel utilisateur

Azkoyen

Azkoyen Zensia Manuel

Azkoyen

Azkoyen STEP 74 Manuel

SandenVendo

SandenVendo Snack Safety Point SVE SSP Manuel du propriétaire

Intralot

Intralot Dreamtouch Smart Manuel utilisateur

Westomatic

Westomatic Primo Compact Manuel utilisateur

Crane

Crane Dixie-Narco Glassfront BevMax 3 5800 Manuel utilisateur