6 FASTER TM T– Issue 00
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
E
N
G
L
I
S
H
-
1.5 CONSULTATION GUIDE
SYMBOL MEANING COMMENT
DANGER Indicates a danger, even mortal, for the User.
WARNING
Indicates a warning or notes on key functions or useful
information.
Pay careful attention to those parts of the text
indicated by this symbol.
The maintenance personnel are requested to take a
measurement value, check a signal, check the correct
position of any machine element, etc. prior to
performing a determined command or operation.
ROUTINE MAINTENANCE
By routine maintenance, it is intended: the reloading
operations, setting the control parameters, emptying
out the coins, and the cleaning operations in the areas
in contact with the food products.
EXTRAORDINARY
MAINTENANCE
By extraordinary maintenance, it is intended: the more
complex maintenance operations (mechanical,
electrical, etc.) in particular situations, or those agreed
with the user which are not considered ordinary
maintenance.
RECYCLING Obligation to dispose of the materials respecting the
environment.
Pay particular attention to those parts of the text which are written in bold type, with larger letters or
underlined as these are used to highlight particularly important operations or information.
The enclosed wiring diagrams are intended for use exclusively by specialised technical personnel authorised
by the manufacturer to carry out extraordinary maintenance operations and checks.
It is strictly prohibited to use the wiring diagrams to modify the machine.
Throughout the manual, when referring to the machine, the terms "at the front" or "front" indicate the door
side while the terms "at the back" or "rear" indicate the other side; the terms "right" and "left" refer to the
operator facing the front of the machine.
For each operation to be carried out on the machine, a level of expertise (see below) is given to indicate the
persons qualified to perform the operation concerned.
Final user Person without specific expertise able to perform the operations of purchasing and
retrieving the product only by using the controls displayed on the machine or by
following the instructions given on the display.
Ordinary
maintenance
operator
Person capable of carrying out the operations in the above point and, in addition, of
operating on the machine following the instructions in this manual marked with the
symbol .
Extraordinary
maintenance
operator
Person capable of carrying out the operations in the above points and, in addition,
of operating on the machine following the instructions in this manual marked with
the symbols . In each case, the specialised technicians must also be capable
of operating with the protections disabled and therefore in reduced safety
conditions. Any operations to be carried out with the parts of the machine in
movement and/or on live equipment must only be performed in exceptional cases
and once the impossibility of operating in suitable safety conditions has been
established. Access to these areas should be permitted only to persons with a
practical knowledge and experience of the machine, particularly in matters of safety
and hygiene.
The operations described in this manual relative to each phase of the life cycle of the machine have been
carefully analysed by the manufacturer. The number of operators and the level of expertise requested are
therefore the most suitable for best performing each specific operation.
