ATD Tools ATD-7447 Instructions d'utilisation

Model ATD-7447 Model ATD-7449

Capacity per pair

10 Ton

22 Ton

Model Number

ATD-7447

ATD-7449

Pin Style

Jack Stands

Operating Instructions & Parts Manual

Printed in China

ATD7447_ATD7449_rev_0417

WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer,

birth defects or other reproductive harm. Wash hands after handling.

Made in China to ATD Tools, Inc. Specications

Visit us at www.atdtools.com

SPECIFICATIONS

For your safety, read, understand, and follow the information provided with and on these jack stands. The owner

and operator shall have an understanding of these jack stands and safe operating procedures before attempting

to use. The owner and operator shall be aware that use of this product may require special skills and knowledge.

Instructions and safety information shall be conveyed in the operator’s native language before use of these stands

is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use

and misuse of the product. If any doubt exists as to the safe and proper use of the jack stands, remove from service

immediately. Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including

labels). Any jack stand that appears damaged in any way, or operates abnormally shall be removed from service

immediately. If the jack stand has been or is suspected to have been subjected to a shock load (a load dropped

suddenly, unexpectedly upon it), immediately discontinue use until jack stand has been inspected by a factory

authorized service center. It is recommended that an annual inspection be done by quali¿ed personnel. Labels and

Operator’s Manuals are available from manufacturer.

PRODUCT DESCRIPTION

ATD Tools Heavy-Duty Pin Style Jack Stands are designed to safely support one end of level, rated capacity loads,

typically vehicles, for extended periods. Heavy gauge steel base section and welded construction helps prevent

distortion and twisting. Compliance with the latest ASME / ANSI - PALD standards ensure safety, strength and

stability.

RATED CAPACITY IS PER PAIR ONLY! USE ONLY ONE PAIR PER VEHICLE.

DO NOT USE FOR ANY PURPOSE OTHER THAN THOSE USES OUTLINED ABOVE !

Figure 2 - Model ATD-7449 componentsFigure 1 - Model ATD-7447 components

Height

Adjustment

Holes

Saddle

Extension Tube

Collar

Base Section

Roll Pin

Extension Tube

Support Bar

Lanyard

Support Bar Holder

Saddle

Extension Tube

Handle

Base

Extension Tube

Support Bar

Lanyard

Support Bar Holder

Collar

Height

Adjustment

Holes

Corresponding Radii

Model Capacity

(per pair) Base Size Min. Height Max. Height Saddle Size

3-3/8” x 5”

3-1/8” x 2-3/4”

Net Weight

ATD-7447 10 Ton 16" x 16" 28" 47" 120 lbs.

ATD-7449 22 Ton 9-7/8" x 9-7/8" 12-1/4" 19-7/8" 65 lbs.

!WARNING

Study, understand and follow all instructions

provided with and on this device before use.

Rated capacity is per pair! Do not exceed rated

capacity.

Use only on hard, level surface.

Center load on saddle.

Use as a matched pair to support one end of a

vehicle only. One pair per vehicle only.

Jack stands are not to be used to simultaneously

support both ends or one side of a vehicle.

No alterations shall be made to this device.

Failure to heed these markings may result in

personal injury and/or property damage.

BEFORE USE

1. Inspect stands before each use. Do not use if bent,

broken or cracked components are noted. Ensure

that all parts move freely.

2. Verify that the product and the application are

compatible, if in doubt call for Technical Service

(888) 332-6419.

3.Beforeusingthis product,read theoperator’smanual

completely and familiarize yourself thoroughly with

the product and the hazards associated with its

improper use.

4. Insert roll pin into the bottom hole of the extension

tubetopreventinadvertentloss oftheextension tube.

Model ATD-7449 is pre-installed.

5. Always check the vehicle owners or service manual

for location of proper lift and support points.

OPERATION

IMPORTANT! Rated capacity is per pair. Use ONLY

one pair per vehicle. No alterations shall be made to

this device. Do not use adapters or accessories on the

saddle or base frame.

1.Adjust saddleheight bypulling upthe extension tube,

then insert the tube support bar through the hole on

extension tube.

2. For model ATD-7447:Ensure that support bar is

secure before loading. Insert support bar into the

extension tube far enough to create equal distance

of bar extending from the extension tube on both

sides.

For model ATD-7449:Check to ensure support bar

is secure and nested across 2 corresponding radii

before loading. Ensure that support bar is inserted

completely so that bar stop engages the collar.

3. Carefully position stands so that load is centered on

stand’s saddle.

4. Slowly lower the vehicle onto the stands.

5. Check to ensure that vehicle is secure before

working on, around or under. When used to support

vehicle, use wheel chocks to prevent inadvertent

movement.

To lower load

1. With suitable jack, raise vehicle clear of stands.

2. Carefully release support bar and allow extension

tube to glide down to lowest position.

3.Carefully remove stands,then carefullylower vehicle

with jack.

MAINTENANCE

To help prevent rust, wipe clean and/or blow dry after

each use. Do not apply oil or lubricant to ANY portion

of this product. Keep support bar in bar holder on base

section.

Note:Noreplacement partsareavailable forthisdevice.

Replace as matched pair only. To replace missing or

damaged labels and operator’s manuals, contact

Customer Service (888) 332-6419.

!WARNING

Be sure all tools and personnel are clear before

lowering load.

ATD Tools, Inc.

160 Enterprise Drive

Wentzville, MO 63385

www.atdtools.com

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, ATD Tools,Inc. will repair or replace, at its option, without charge,

any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied

warranty not excluded hereby.

Performance of any obligation under this warranty may be obtained by contacting your distributor or point of sale

for further instructions. Please retain your proof of purchase, as it will be needed for any claim.

Except where such limitations and exclusions are VSHFL¿FDOO\ prohibited by applicable law, (1) the CONSUMER'S

SOLEAND EXCLUSIVE REMEDYSHALLBE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTSAS

DESCRIBEDABOVE, and (2)ATD Tools,Inc. SHALL NOTBE LIABLE FORANY CONSEQUENTIALOR INCIDEN-

TALDAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OFANYANDALLEXPRESSEDAND IMPLIED

WARRANTIES, INCLUDING WITHOUT LIMITATION,ANYWARRANTIES OF MERCHANTABILITYAND FITNESS

FOR A PARTICULAR PURPOSE, IS LIMITED TOA PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply

to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you. This warranty gives you VSHFL¿F legal rights, and you may also have

other rights which vary from state to state.

Ce manuel convient aux modèles suivants

Autres manuels ATD Tools Jack

ATD Tools

ATD Tools 7430A Manuel utilisateur

ATD Tools

ATD Tools ATD-7345B Manuel utilisateur

ATD Tools

ATD Tools ATD-7333B Manuel utilisateur

ATD Tools

ATD Tools ATD-7462 Manuel utilisateur

ATD Tools

ATD Tools ATD-7382W Manuel utilisateur

ATD Tools

ATD Tools ATD-7328 Manuel utilisateur

ATD Tools

ATD Tools ATD-7438 Manuel utilisateur

ATD Tools

ATD Tools ATD-7381W Manuel utilisateur

ATD Tools

ATD Tools 7392 Instructions d'utilisation

ATD Tools

ATD Tools ATD-7396 Instructions d'utilisation

ATD Tools

ATD Tools ATD-7383W Manuel utilisateur

ATD Tools

ATD Tools ATD-7304A Manuel utilisateur

ATD Tools

ATD Tools ATD-7465 Manuel utilisateur

ATD Tools

ATD Tools 7345B Manuel utilisateur

ATD Tools

ATD Tools ATD-7429 Manuel utilisateur

ATD Tools

ATD Tools 7404 Manuel utilisateur

ATD Tools

ATD Tools MagicLift ATD7325 Instructions d'utilisation

ATD Tools

ATD Tools ATD-7304 Manuel utilisateur

ATD Tools

ATD Tools ATD-7433 Instructions d'utilisation

ATD Tools

ATD Tools ATD-7350A Manuel utilisateur

ATD Tools

ATD Tools 7434A Manuel utilisateur

ATD Tools

ATD Tools ATD-7354 Manuel utilisateur

ATD Tools

ATD Tools ATD-7443A Manuel utilisateur

ATD Tools

ATD Tools ATD-7435 Instructions d'utilisation

Manuels Jack populaires d'autres marques

Omega Lift Equipment

Omega Lift Equipment 18122C Instructions d'utilisation

Pittsburgh

Pittsburgh 58816 Instructions de montage

Unimec

Unimec TP Manuel utilisateur

Sonic

Sonic 4800703 Manuel utilisateur

BGS technic

BGS technic 70039 Manuel utilisateur

TradeQuip

TradeQuip 1128T Manuel utilisateur

VEVOR

VEVOR TJD-12000SP-F Manuel utilisateur

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Manuel utilisateur

Stels

Stels 51131 Manuel utilisateur

Bushranger

Bushranger RJX01 Manuel utilisateur

Clarke

Clarke CTJ2500QLG Manuel d'installation et d'exploitation

Valex

Valex 1650520 Manuel utilisateur

Pfaff

Pfaff Merkur M0 Manuel utilisateur

Beta

Beta 3050/K Supplément

Sealey

Sealey 1050CXHV Manuel utilisateur

Jung

Jung JH Series Manuel utilisateur

URIAH

URIAH UC200020 Manuel utilisateur

Kennedy

Kennedy KSJ010 Manuel utilisateur