ATD Tools ATD-7435A Manuel utilisateur

ATD-7435A

1/2-Ton Heavy-Duty Hydraulic Floor Style Transmission Jack

Owner’s Manual

Features: Specifications:

6-15/16"

28-5/16"

17-15/16"

13-3/8" 7-7/8"

13 916 15

33-5/8" 19-3/4" 7-1/2"

140.80

ATD7435A_rev_1120Made in China to ATD Tools, Inc. Specifications

Visit us at www.atdtools.com

1,100 lbs.

BEFORE USE

SAVE THESE INSTRUCTIONS

r e e r r r e

r e

Inspect before each use.

PRODUCT DESCRIPTION:

ATDT ve

SAFETY INSTRUCTIONS:

10 e

v e re r

r r

!WARNING

CAUTION!

Figure 1 - Model ATD-7435A components

O F

ASSEMBLY:

OPERATION:

T e

!WARNING

MAINTENANCE:

Lowering

Check and Refill Oil

Lubrication and Cleaning

Air Venting Procedures

Lifting

Damaged Equipment

SHOULD BE REMOVED

FROM SERVICE UNTIL REPAIRED

Symptom Possible Causes Solu on

1. Release valve not ghtly closed.

1. Tighten release valve knob.

2. Low oil level.

2. Check and add oil. Follow “Check and ReĮll Oil”

instruc ons on Pg.3.

3. Defec ve or worn internal parts.

3. Discon nue use and contact a local repair center.

4. Load exceeds maximum

allowance.

4. Use a higher capacity jack.

1. Release valve not ghtly closed.

1. Tighten release valve knob.

2. Power unit malfunc on.

2. Discon nue use and contact a local repair center.

1. Air trapped in system.

1. Vent air out of system. Fol l ow “Air Ven ng Procedures”

on Pg.3.

2. Reservoir oil overĮlled.

2. Check and ensure proper oil level. Follow “Check and

ReĮll Oil” instruc on on Pg.3.

Check and ens ure proper oi l l evel .

Follow “Check and ReĮll Oil” instruc ons on Pg.3.

Jack will not func on properly a er tried

solu on.

Internal malfunc on or structural

damage.

Stop usage and contact an authorized repair

center.

Jack will not li the load.

Jack will not hold the load.

Jack will not descend to minimum height,

or will not remain in lowered posi on.

Jack will not li to max height.

Low oil level.

TROUBLESHOOTING

Alterations

Attachments and Adapters

Storage

Inspection

MAINTENANCE CONTINUED:

*Items not iden ed by part number are not available for replacement.

Replacement Parts for model ATD-7435A:

REPLACEMENT PARTS

D7435A

Item Part Number Description Q'ty

1 7435A-1 Power Unit Assembly 1

2 7435A-2 Rear Caster Assembly 4

3-3-A5347A5347

33 ylbmessAylbmessA eldnaHeldnaH 11

4 7435A-4 Chain 2

5 7435A-5 Saddle Bracket Assembly 2

6 7435A-6 Oil Filler Screw w/ Seal 1

N/A 7435A-L Label 1

WARRANTY

1 YEAR LIMITED WARRANTY

THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

PURCHASED FROM: _______________________________________

DATE PURCHASED: ________________________________________

INVOICE/RECEIPT NUMBER: _________________________________________

Your ATD-7435A is warranted for a period of 12 months from the original purchase date.

For a period of one (1) year from your purchase date, ATD Tools, Inc. will repair or replace (at its option) without charge, your

ATD product if it was purchased new and the product has failed due to a defect in material or workmanship which you experienced

during normal use of the product. This limited warranty is your exclusive remedy.

To access the benefits of this warranty, contact your supplier, or point of sale directly. You may be advised to return the product

under warranty, freight prepaid, to your supplier for warranty determination.

If this ATD product is altered, abused, misused, modified, or undergoes service by an unauthorized technician, your warranty will

be void. We are not responsible for damage to ornamental designs you place on this ATD product and such ornamentation should

not cover any warnings or instructions or they may void the warranty. This warranty does not cover scratches, superficial dents, and

other abrasions to the paint finish that occur under normal use. It also does not cover normal wear items such as but not limited to

brushes, batteries, drill bits, drill chucks, pads or blades.

Subject to the law in your state:

(1) Your sole and exclusive remedy is repair or replacement of the defective product as described above.

(2) ATD is not liable for any incidental damages, including but not limited to, lost profits and unforeseeable consequences.

(3) The repair and replacement of this product under the express limited warranty described above is your exclusive remedy and is

provided in lieu of all other warranties, express or implied. All other warranties, including implied warranties and warranties of

merchantability or fitness for a particular purpose are disclaimed and, if disclaimer is prohibited, these warranties are limited to

one year from your date of purchase of this product.

Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on

incidental or consequential damages. You should consult the law in your state to determine how your rights may vary.

[Affix receipt or invoice here for safe keeping]

Table des matières

Autres manuels ATD Tools Jack

ATD Tools

ATD Tools ATD-7433A Manuel utilisateur

ATD Tools

ATD Tools ATD-7421W Manuel utilisateur

ATD Tools

ATD Tools ATD-7227B Manuel utilisateur

ATD Tools

ATD Tools ATD-7350A Manuel utilisateur

ATD Tools

ATD Tools ATD-7461 Manuel utilisateur

ATD Tools

ATD Tools ATD-7328 Manuel utilisateur

ATD Tools

ATD Tools ATD-7328 Instructions d'utilisation

ATD Tools

ATD Tools ATD-7383W Manuel utilisateur

ATD Tools

ATD Tools ATD-7328A Manuel utilisateur

ATD Tools

ATD Tools ATD-7333B Manuel utilisateur

ATD Tools

ATD Tools ATD-7438 Manuel utilisateur

ATD Tools

ATD Tools ATD-7465 Manuel utilisateur

ATD Tools

ATD Tools ATD-7354 Manuel utilisateur

ATD Tools

ATD Tools ATD-7385W Manuel utilisateur

ATD Tools

ATD Tools ATD-7465 Manuel utilisateur

ATD Tools

ATD Tools ATD-7462 Manuel utilisateur

ATD Tools

ATD Tools ATD-7304A Manuel utilisateur

ATD Tools

ATD Tools 7425A Manuel utilisateur

ATD Tools

ATD Tools ATD-7435 Instructions d'utilisation

ATD Tools

ATD Tools 7514 Manuel utilisateur

ATD Tools

ATD Tools ATD-7344B Manuel utilisateur

ATD Tools

ATD Tools ATD-2025 Manuel utilisateur

ATD Tools

ATD Tools ATD-7367W Manuel utilisateur

ATD Tools

ATD Tools 7436A Manuel utilisateur

Manuels Jack populaires d'autres marques

Omega Lift Equipment

Omega Lift Equipment 18122C Instructions d'utilisation

Pittsburgh

Pittsburgh 58816 Instructions de montage

Unimec

Unimec TP Manuel utilisateur

Sonic

Sonic 4800703 Manuel utilisateur

BGS technic

BGS technic 70039 Manuel utilisateur

TradeQuip

TradeQuip 1128T Manuel utilisateur

VEVOR

VEVOR TJD-12000SP-F Manuel utilisateur

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Manuel utilisateur

Stels

Stels 51131 Manuel utilisateur

Bushranger

Bushranger RJX01 Manuel utilisateur

Clarke

Clarke CTJ2500QLG Manuel d'installation et d'exploitation

Valex

Valex 1650520 Manuel utilisateur

Pfaff

Pfaff Merkur M0 Manuel utilisateur

Beta

Beta 3050/K Supplément

Sealey

Sealey 1050CXHV Manuel utilisateur

Jung

Jung JH Series Manuel utilisateur

URIAH

URIAH UC200020 Manuel utilisateur

Kennedy

Kennedy KSJ010 Manuel utilisateur