Asus WL-330N Manuel utilisateur
®
Quick Start Guide
WL-330N
Portable Wireless N Router
Q6758 / August 2011
English......................................................................................................3
Español.....................................................................................................12
Français ....................................................................................................21
Português do Brasil..............................................................................30
3
A quick look
Package contents
WL-330N Support CD (User Manual, utilities, GPL)
Micro USB power cord Quick Start Guide
Network cable Universal power adapter (110V ~ 240V)
NOTES:
• If any of the items is damaged or missing, contact your retailer.
• For more details on the WL-330N's functions and features, refer to the
user manual included in the support CD.
23
5
4
1
7
6
1) WPS button 6) DC in (micro USB) port
2) Link status LED 7) Ethernet port
3) Network LED 8) Air vent
4) Wireless LED 9) Restore button
5) Power LED
English
9
8
4
Operation modes
ASUS WL-330N provides ve operation modes: Wireless Router, Access Point
(AP), Hotspot (WiFi Account Sharing), Repeater, and Wireless Network Adapter.
NOTES:
• Use the Device Discovery utility in the support CD to get the WL-330N'sWL-330N's's
dynamic IP address.
• Before setting up the WL-330N to Hotspot, Repeater or Network AdapterWL-330N to Hotspot, Repeater or Network Adapterto Hotspot, Repeater or Network Adapter
mode, ensure that you connect the computer and the WL-330N using a
network cable.
• If you cannot switch modes successfully, reset the system to its factory
default settings through pressing the Restore button while the ASUS WL-
330N is ON.
Wireless computer ADSL/Cable modem
WL-330N
Wireless Router mode
In the Router mode, connect the WL-330N to an ADSL or a cable modem, and
the network clients share an IP address for Internet connection. In this mode,
the WL-330N provides wireless signals, NAT, rewall, and IP sharing functions to
the wireless clients.
English
Access Point (AP) mode
In the Access Point (AP) mode, connect the WL-330N to an router using a
network cable and create a wireless network. In this mode, NAT, rewall, and IP
sharing functions are disabled.
NOTE: When the Link status LED is on, it indicates that a wireless
client has successfully connected to WL-330N.
5
Hotspot (WiFi Account Sharing) mode
In places with available WiFi signals, share the wireless signal to other WiFi
devices using only one WiFi service account.
Repeater mode
In the Repeater mode, connect WL-330N to an existing wired/wireless network
and extend your wireless network coverage.
WL-330N
Wireless computer
Wireless computer
English
Wireless computer WL-330N ADSL/Cable modem
Wired computer
WL-330N
Wireless computer
NOTE: When the Link status LED is on, it indicates that a wireless
client has successfully connected to WL-330N.
NOTE: When the Link status LED is on, it indicates that WL-330N has
successfully connected to Wi-Fi station.
6
English
Getting started
1. Unplug and disconnect the wires/cables from your existing modem
setup.
NOTE: For Wireless Router mode, start from step 1. For other opera-
tion modes, start from step 2.
Wireless Network Adapter mode
In the Wireless Network mode, you can connect any Ethernet-enabled device
to your wireless home network via WL-330N. This mode is perfect for home
theater devices such as the Internet TV, TiVo, and Blu-ray player.
Modem
a
b
Internet TV
WL-330N ADSL/Cable
modem
NOTE: When the Link status LED is on, it indicates that WL-330N has
successfully connected to Wi-Fi station.
NOTE: When the Link status LED is on, it indicates that WL-330N has
successfully connected to Wi-Fi station.
7
English
a: Unplug the AC adapter from the power outlet and disconnect it from your
cable/ADSL modem.
b: Disconnect the network cable from your cable/ADSL modem.
1
2. Connect and turn on WL-330N.
a: Using a network cable, connect your computer to the LAN port of the WL-
330N.
b: To power the WL-330N, use its power adapter (1) or its micro USB power
cord (2).
2
3. Log into WL-330N's web graphics user interface (web GUI).
a: Ensure that the wireless LED is blinking.
Wireless LED
8
English
c: From the web GUI, select the operation mode and congure its settings for
your wireless network setup.
NOTES:
• For more details. refer to the user manual included in the support CD.
• If the web GUI does not launch, refer to the Troubleshooting section.
b: In your web browser, key in 192.168.1.1. Key in admin as the default user-
name and password.
4. Set up the devices according to your selected operation mode.
IMPORTANT: Ensure that you unplug and disconnect the wires/cables
from your existing modem setup.
Wireless Router mode
a: Plug the modem's power adapter to a power source.
b: Using a network cable, connect the modem and WL-330N.
Modem
ab
9
English
Access Point mode
a: Using a network cable, connect the
access point and WL-330N.
Repeater and Hotspot modes
Simply power on WL-330N using its power adapter or its micro USB power cord.
A network cable is not needed.
Wireless Network Adapter mode
a: Connect the micro USB power cord
to the Ethernet-enabled device
such as an Internet TV.
b: Use a network cable to connect
the Ethernet-enabled device and
WL-330N.
ANT ANTReset Power On/Off USB LAN4 LAN3 LAN2 LAN1 WPS On Off ADSL
a
a
b
NOTE: For more details on using the micro USB cord to power WL-
330N, refer to step 2 of the Getting started section.
NOTE: For more details on the operation modes, refer to the
Operation Modes section.
10
Frequently Asked Questions
Q1: I cannot access the web GUI to congure the WL-330N settings.
• Close all running web browsers and launch again.
• Follow the steps below to congure your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to launch the web browser.
2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings screen, untick Use a proxy
server for your LAN.
4. Click OK when done.
B. Set the TCP/IP settings to automatically obtain an IP address.
1. Click Start > Control Panel > Network and Internet > Network and Shar-
ing Center > Manage network connections.
2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
3. Tick Obtain an IP address automatically.
4. Click OK when done.
C. Disable the dial-up connection, if enabled.
1. Click Start > Internet Explorer to launch the browser.
2. Click Tools > Internet options > Connections tab.
3. Tick Never dial a connection.
4. Click OK when done.
Mac 10.5.8
A. Disable the proxy server, if enabled.
1. From the menu bar, click Safari > Preferences... > Advanced tab.
2. Click Change Settings... in the Proxies eld.
3. From the list of protocols, deselect FTP Proxy and Web Proxy (HTTP).
4. Click OK when done.
B. Set the TCP/IP settings to automatically obtain an IP address.
1. Click the Apple icon > System Preferences > Network.
2. Select Ethernet and select Using DHCP in the Congure eld.
English
Autres manuels pour WL-330N
2
Table des matières
Langues :
Autres manuels Asus Routeur sans fil
Asus
Asus RT-AX88U Manuel utilisateur
Asus
Asus ROG Strix GS-AX5400 Manuel utilisateur
Asus
Asus CM-32 Manuel utilisateur
Asus
Asus ROG Rapture GT-AXE11000 Manuel utilisateur
Asus
Asus RT-N65U Manuel utilisateur
Asus
Asus RT-N53 Manuel utilisateur
Asus
Asus RT-AX55 Manuel utilisateur
Asus
Asus RT-N10 - Wireless Router - 802.11b/g/n Manuel utilisateur
Asus
Asus RT-N12 Series Manuel utilisateur
Asus
Asus DSL-N16UP Series Manuel utilisateur
Asus
Asus RT-AC1200G Manuel utilisateur
Asus
Asus WL-500gP Manuel utilisateur
Asus
Asus RT-AX5400 Manuel utilisateur
Asus
Asus RT-AX3000 Manuel utilisateur
Asus
Asus DSL-N55U Manuel utilisateur
Asus
Asus RT-N12HP Manuel utilisateur
Asus
Asus XC5 Manuel utilisateur
Asus
Asus RT-N10U Manuel utilisateur
Asus
Asus ZenWiFi XT9 Manuel utilisateur
Asus
Asus RT-AC1300G PLUS Manuel utilisateur
