Asus TM-AC1900 Mode d’emploi
Start Guide
Wi-Fi CellSpot Router
TM-AC1900 Dual Band Router
3x3 Wireless-AC 1900 Gigabit Router
E9490 / First Edition / June 2014
1
English
Package contents
TM-AC1900 AC adapter
Network cable (RJ-45)
A quick look at your Wi-Fi CellSpot Router
1) LAN 1~4 LED 6) Power LED 11) USB 3.0/2.0 ports
2) WAN (Internet) LED 7) WPS button 12) WAN port
3) USB 3.0/2.0 LED
4) 2.4GHz LED 9) Power switch 14) LAN ports
5) 5GHz LED 10) Power (DC-IN) port 15) Reset button
NOTE: If any of the items is damaged or missing, contact your retailer.
TM-AC1900
Dual Band Wireless Router
WiFi Antenna
Start Guide
2
English
NOTES:
• USB External HDD/Flash disk:
• ThewirelessrouterworkswithmostUSBHDDs/Flashdisksupto
2TB and supports read-write access for FAT16, FAT32, EXT2, EXT3,
and NTFS.
• TosafelyremovetheUSBdisk,launchthewebGUI
(http://192.168.29.1), then in the Network Map page's upper
right corner, click the USB icon and click Eject USB 3.0 / USB 2.0.
• IncorrectremovaloftheUSBdiskmaycausedatacorruption.
• Forthelistoflesystemandharddiskpartitionsthatthewireless
routersupports,visit
http://event.asus.com/networks/disksupport
• Forthelistofprintersthatthewirelessroutersupports,visit
http://event.asus.com/networks/printersupport
3
English
Installing your router
IMPORTANT: Before installing the router, ensure that Internet connec-
tion is available
45°
90°
45°
TM-AC1900
Dual Band Wireless Router
1. Position your wireless router.
For the optimal wireless transmission between the wireless router and connect-
ed wireless devices, ensure that you:
• Place the
• Place the
• Place the
• To ensure
• Always
wireless router in a centralized area for a maximum wireless coverage
for the network devices.
wireless router away from metal obstructions and away from direct
sunlight.
wireless router away from 802.11g or 20MHz only Wi-Fi devices,
2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers,
heavy-duty motors, lights, microwave ovens, refrigerators, and other
industrial equipment to prevent signal interference or loss.
the best wireless signal, orient the three detachable antennas as
shown in the drawing below.
update to the latest Visit the ASUS website at
http://www.asus.com to get the latest updates.
4
English
2. Prepare your modem.
a. Unplug the AC adapter from the power outlet and disconnect it from your
cable/ADSL modem.
b. Disconnect the network cable from your cable/ADSL modem.
c. Reboot your computer (recommended).
Modem
OFF!
WARNING! Before disconnecting the wires/cables, ensure that your
cable/ADSL modem has been turned o for at least 10 seconds. If your
modemhasabackupbattery,removeitaswell.
TM-AC1900
Computer
Wall Power Outlet
LAN
Modem
Power
WAN
3. Set up your wireless environment.
a
b
c
d
a
b
c
d
a
b
c
d
a
b
c
d
a
b
c
d
a
b
c
d
a
b
c
d
5
English
a. Insert your wireless router’s AC adapter to the DC-IN port and plug it to a
power outlet.
b. Using another network cable, connect your modem to your wireless router’s
WAN port.
c. Insert your modem’s AC adapter to the DC-IN port and plug it to a power
outlet.
d. Using the bundled network cable, connect your computer to your wireless
router’s LAN port. Ensure that the WAN and LAN LEDs are blinking.
NOTE:YoucanalsosetupWi-Fi CellSpot Routerusingamobiledevice
such as a smartphone or tablet PC. To do this, go to Update Network
Names(SSIDs) and Passwords using a mobile device for details.
a. Disabletheproxyserver,ifenabled.
b. Set the TCP/IP settings to automatically obtain an IP address.
c. Disable the dial-up connection, if enabled.
NOTE: For more details on disabling your computer settings, refer to
Frequently Asked Questions (FAQs).
4. Disable some settings on your computer.
6
English
To set up your router using QIS (Quick Internet Setup):
1. Press the power button at the back of your router. Ensure that the Power,
LAN and WAN LEDs are on.
2. LaunchyourwebbrowsersuchasInternetExplorer,Firefox,GoogleChrome,
or Safari.
Setting up your router using the Quick Internet Setup
Wizard
NOTE: If QIS does not launch automatically, enter http://192.168.29.1
or http://cellspot.routerin the address bar and refresh the browser
again.
3. Assign your router login name and password and click Next. You will need
thisloginnameandpasswordtologintoWi-Fi CellSpot Routertoviewor
change the router settings. Please take note of your router login and password
for future use. Passwords can not be recovered. If the password is lost, the
router must be factory reset.
7
English
4. The wireless router’s Quick Internet Setup (QIS) feature automatically detects
if your ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static
IP. Please obtain the necessary information about your Internet connection
typefromyourInternetServiceProvider(ISP).Ifyourconnectiontypeis
DynamicIP(DHCP),QISwizardwillautomaticallydirectyoutothenextstep.
NOTE: If your connection type is Static IP, choose Static IP and click
Next.KeyinIPaddress,subnetmask,defaultgatewayandDNSserver
informationprovidedbyyourISP.ClickNext to proceed.
Setup of router (TM-AC1900) administrator password
Login name:
Login password:
8
English
Your wireless router comes with the
intuitiveASUSWRTwebgraphical
user interface. ASUSWRT allows you
toeasilycongureitsvariousfea-
tures through a web browser such
asInternetExplorer,Firefox,Safari,
or Google Chrome.
Managing the router via the ASUSWRT web GUI
IMPORTANT:
• Formoredetailsonusingyourrouter'sWeb
GUI, refer to the user manual.
• Alwaycheckandupgradermwaretothe
latestversionforbetterexperience.
• VisitASUSNetworkingvideochannelfor
tutorialvideosonfeaturedfunctions.
NOTE: Use the search bar
on the bottom of the inter-
face to get more informa-
tion from ASUS technical
support site
http://support.asus.com.
9
English
Update your Netword Names (SSIDs) and passwords using your mobile device.
The set up wizard will automatically recongize your mobile device and display
a simplified mobile web page when you visit http://cellspot.router. For more
advanced options, visit the same URL via a computer.
maaobileversionifyouuseasmartphoneoratabletPCtolaunchit.
Tosetupyourrouterusingamobiledevice:
3. Make sure you are connected to either
CellSpot_2.4GHz or CellSpot_5GHz network
4.Open up a web brower on your mobile device
and go to http://cellspot.router .
Update Network Names (SSIDs) and Passwords using
amobile device
TM-AC1900
5. Enter the admin username “admin” and temporary
password “password”. Please Note: During your
first visit you are require to update your Admin
password for security purposes. Follow the
instructions for changing your admin password
and then continue to the Network Namesand
Password screen.
1.Turn on your Wi-Fi CellSpot Router.
To change your Network names and SSIDs from your
mobile device :
2.Enable Wi-Fi CellSpot Router.
Autres manuels pour TM-AC1900
2
Table des matières
Autres manuels Asus Routeur sans fil
Asus
Asus TM-AC1900 Manuel utilisateur
Asus
Asus WL-500W SuperSpeed N Manuel utilisateur
Asus
Asus ZenWiFi AX Mini Manuel utilisateur
Asus
Asus APAC10332 Manuel utilisateur
Asus
Asus RT-AC51U Manuel utilisateur
Asus
Asus DSL-N11 Manuel utilisateur
Asus
Asus ROG Strix GS-AX5400 Manuel utilisateur
Asus
Asus RT-N11P Manuel utilisateur
Asus
Asus RT-AX82U Manuel utilisateur
Asus
Asus OPTUS DSL-AX5400 Manuel utilisateur
Asus
Asus BRT-AC828 Manuel utilisateur
Asus
Asus ZenWiFi XD6S Manuel utilisateur
Asus
Asus RT-AC55UHP Manuel utilisateur
Asus
Asus RT-AX55 Manuel utilisateur
Asus
Asus RT-AC1200G+ Manuel utilisateur
Asus
Asus DSL-AX82U Manuel utilisateur
Asus
Asus WL-520G Manuel utilisateur
Asus
Asus ROG Rapture GT-AX6000 Manuel utilisateur
Asus
Asus RT-AC1200 Manuel d'instructions
Asus
Asus RT-AC68U Manuel utilisateur
