Asus ACM6000EB Manuel utilisateur
ACM6000EB Cable Modem
User's Manual
Copyright Information
Copyright © 2000 ASUSTeK Computer Inc.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written consent of ASUSTeK Computer Inc.
Disclaimer
ASUSTeK Computer Inc. makes no representations or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, ASUSTeK
Computer Inc. reserves the right to revise this publication and to make changes from time to time in the content
hereof without obligation to notify any person of such revisions or changes.
Trademarks
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of
their respective companies, and are used only for identification or explanation and to the owners’ benefit, without
intent to infringe.
2
Product Name: ACM6000EB Cable Modem
Manual Revision: 1.00 E580
Release Date: June 2000
Contents
Introduction
Overview ........................................................................................................................... 4
Features ............................................................................................................................ 4
Package Contents ............................................................................................................. 4
Preparations
System Requirement ......................................................................................................... 5
Installing a Network Card .................................................................................................. 5
Installing the TCP/IP Protocol............................................................................................ 6
Checking if TCP/IP is already installed........................................................................... 6
Adding TCP/IP in Network properties ............................................................................. 6
Changing TCP/IP Settings................................................................................................. 6
Using the Cable Modem
Front Panel........................................................................................................................ 7
Rear Panel ........................................................................................................................ 8
Installing the Cable Modem............................................................................................... 9
Powering Up .................................................................................................................... 10
Multiple Client Configuration ........................................................................................... 10
Product Certifications
FCC (Federal Communications Commission Statement) ............................................... 11
UL.................................................................................................................................... 11
CE ................................................................................................................................... 11
Product Specifications
Software Specifications ................................................................................................... 12
RF Receiver/Transmitter Specifications .......................................................................... 13
Hardware Specifications.................................................................................................. 14
3
4
Introduction
Overview Thank you for purchasing the ASUS ACM6000EB DOCSIS-compliant cable modem. This
cable modem delivers the highest performance in data over cable technology. Ideal for home
and small business users, this easy-to-use communication device offers reliable connectivity
as well as remarkable data transfer rates--up to 43Mbps downstream and 10Mbps upstream,
100 times faster than a 56K dial-up modem. Once the cable modem is powered up, you are
online to enjoy real-time 3D animation, video conferencing, or perform other data intensive
operations.
Features • MCNS DOCSIS 1.0 compliant
• Support for 6MHz downstream and 200K-3200KHz upstream cable channel bandwidth
• Peak data transfer rates of 38Mbps (64QAM) and 42Mbps (256QAM)
• Auto detection of 64QAM or 256QAM
• Network management protocol support for SNMPv1/v2c and DOCSIS 1.0 MIBs
• Data Encryption Standard (DES) and Baseline Privacy Interface (BPI) compliant
• Easy installation and operation
• Self-diagnoses available through front panel LEDs
• Software upgradeable
• Low power consumption with a maximum of 10Watts
• Stylish, compact design; horizontal or vertical standing
Package
Contents (1) ASUS ACM6000EB Cable Modem (1) CAT.5 Ethernet cable (RJ-45)
(1) AC power adapter (1) User’s Manual
5
Preparations
Before connecting the cable modem to your PC, make sure your system is equipped with a
LAN controller and supports the TCP/IP protocol.
Installing a
Network Card If your system does not have an embedded LAN controller, you must install a network
interface card as instructed below (assuming that you are using the ASUS PCI-L101 Fast
Ethernet card under the operating system of Windows 98):
1. Install the PCI-L101 card on your
motherboard.
2. Power up your PC and follow the Add
New Hardware Wizard’s instructions to
install the driver. When asked to restart
your computer at the end of the installa-
tion, click Yes.
3. After restarting the system, right-click
My Computer on the desktop, select
Properties, click the Device Manager
tab, and then double-click Network
adapters to confirm that the Ethernet
driver is properly installed.
System
Requirements
6
Preparations
Installing the
TCP/IP
Protocol 1. Click the Start button on the
desktop. In the Settings menu, select
Control Panel .
Double-click the Network icon .
• Checking if TCP/IP is already installed 2. In the list of installed network compo-
nents try to find the TCP/IP protocol. It
may be followed by the name of the
Ethernet controller. If you cannot locate
anything that begins with TCP/IP, install
it as described below.
• Adding TCP/IP in Network properties 3. Select Microsoft from the
manufacturers. In the list
of network protocols
browse to TCP/IP and
then double-click it.
After the TCP/IP protocol is installed, restart your computer and consult the installation
guide provided by your cable operator to complete TCP/IP configurations.
Changing
TCP/IP Settings
1. Click Add.
.
2. Double-click Protocol.
7
Using the Cable Modem
Front Panel
POWER STATUS TESTCABLE PC
1 2 3 4 5
LED Indicator State Description
1. Power LED ON Modem is powered ON
OFF Modem is powered OFF
2. Status LED ON Modem successfully registered on cable operator’s network
Flashing Modem is registering on cable operator’s network
OFF
(While Cable Link LED is flashing) searching for downstream channel
3. Cable Link LED ON Normal operation
Flashing (While Status LED is ON) data streaming down
Flashing (While Status LED is OFF) searching for downstream channel
OFF ––
4. PC Link LED ON LAN and PC connect successfully
Flashing Data transmitting between LAN and PC
OFF No connection between LAN and PC
5. Test ON Error (Resetting the cable modem may help; if not, contact
customer support)
OFF Normal operation
8
DC+5V/2A ResetCable Console USB 10/100-BaseT
1 2 3 4 65
1. DC +5V/2A Power Input Jack
The provided power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack will supply power to the cable modem.
2. RF Connector
The connector may be located right next to the power input jack or the serial port. The F-
Type female connector allows cable data communication between the cable modem and
the cable service provider through a coaxial cable.
3. Serial Port
The 9-pin D-sub serial port supports the RS-232 terminal interface for advanced cable
modem management.
4. Reset Switch
The reset button, when pressed, resets the cable modem without the need to unplug the
power cord.
5. USB Port (optional)
The optional USB port allows the modem to be connected to your computer through the
USB interface.
6. 10/100-BaseT LAN Port
The LAN port supports 10Base-T or 100Base-TX networks. This port allows your PC or
Ethernet hub to be connected to the cable modem through a CAT.5 LAN cable.
Using the Cable Modem
Rear Panel
9
Using the Cable Modem
Installing the
Cable Modem Take the following steps to accomplish the installation procedure:
1. Connect the cable TV coaxial cable to the input connector of a signal splitter.
2. Connect a coaxial cable from one of the output connectors on the splitter to the input
connector of your TV set.
3. Use another coaxial cable to connect the other output connector on the splitter and the
RF connector on the rear panel of the cable modem.
4. Connect the LAN cable from the LAN port on your computer to the LAN port on the
rear panel of the cable modem.
5. Connect the AC power adapter to the DC +5V/2A input jack on the rear panel of the
cable modem. Plug in the AC power adapter to an electrical outlet.
NOTE: If you are not using a television on the cable line, you may skip steps 1 to 3 and
connect the cable TV coaxial cable directly to the RF connector on the rear panel of the cable
modem.
Cable Service Connections
To PC
To Electrical Outlet To Splitter or
Cable Network
Rear Panel Connections
Step 3 Step 4Step 5
TV
Splitter
Computer
Cable
Modem
2-Way
Splitter
To Cable
Network
10
Using the Cable Modem
Multiple Client
Configuration The cable modem supports up to 15 pieces of consumer premises equipment. If you can
obtain multiple IP addresses from your cable operator, you can hook up as many comput-
ers to the cable modem as the number of the IP addresses, using a hub inbetween (as
shown below). Each connected client PC will then be assigned one dynamic IP address by
the cable operator.
Powering Up When all connections have been properly made and the power is ON, the cable modem will
automatically start the self-test and search for the active cable channel provided by your
cable operator. Now you are all set and ready to surf the internet at a marvelous speed!
Multiple Client Configuration Diagram
Cable Modem Ethernet Hub
Client
Client
Client
To Splitter or
Cable Network
Autres manuels pour ACM6000EB
1
Table des matières
Autres manuels Asus Modem
Asus
Asus 4G-AC68U Manuel utilisateur
Asus
Asus PCE-AX58BT Manuel utilisateur
Asus
Asus DSL-N17U Manuel d'instructions
Asus
Asus CMAX6000 Manuel utilisateur
Asus
Asus PCE-AC68 Manuel utilisateur
Asus
Asus AAM6000UG-ALC Mode d'emploi
Asus
Asus AAM6000EV Manuel utilisateur
Asus
Asus eMTA Manuel utilisateur
Asus
Asus RT-N300 B1 Manuel utilisateur
Asus
Asus DSL-AC68U Manuel utilisateur
Asus
Asus AAM6000UG Manuel utilisateur
Asus
Asus DSL-AC68U Manuel utilisateur
Asus
Asus 4G-N16 Manuel utilisateur
Asus
Asus 4G-N16 Manuel utilisateur
Asus
Asus PCE-AC88 Manuel utilisateur
Asus
Asus US2-400 Manuel utilisateur
Asus
Asus WL-600g Manuel utilisateur
Asus
Asus WL-140 Manuel utilisateur
Asus
Asus ACM6000EB Manuel utilisateur
Asus
Asus AAM6000EV Manuel utilisateur
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur