Assa Abloy Sargent V.S2 Manuel utilisateur

A7786G

04/15

permission of Sargent Manufacturing Company is prohibited.

Proﬁle

WiFi Mortise Lock

Installation Instructions

v.S2

To view helpful video installation tips, scan the

Microsoft® Tags with your mobile phone.

Download the free mobile app at

http://getscanlife.com.

1-800-810-WIRE • www.sargentlock.com • A7786G

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

11/16/13

Warning: Changes or modiﬁcations to this unit not expressly approved by ASSA

ABLOY Inc. could void the user’s authority to operate the equipment.

Warning

Table of Contents

Warning ...................................................................................2

General Description.................................................................4

Hardware Speciﬁcations .........................................................4

Electronic Speciﬁcations.........................................................4

Installation Wiring Overview...................................................4

Lock Wiring..............................................................................5

Parts Breakdown .....................................................................6

Installation Instructions ..........................................................7

To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only.

SARGENT Mfg. Co. v.S Series locksets utilizing a door position switch (DPS) are not rated for,

or intended for use in life safety applications.

FCC:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada:

The term “IC:” before the radio certiﬁcation number only signiﬁes that Industry Canada technical speciﬁcations

were met.

This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

Cet appareillage numérique de la classe B répond à toutes les exigences de l’interférence canadienne causant des-

règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer

l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle interférence reçue, y compris l’interférence qui

peut causer l’opération peu désirée.

4 1-800-810-WIRE • www.sargentlock.com • A7786G

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/15

Profile Series v.S2 WiFi Mortise Lock

Hardware Speciﬁcations

General Description

The SARGENT Proﬁle Series v.S2 Mortise Lock* is available with either an HID® 125 kHz prox or 13.56 MHz

iCLASS® technology reader. It is designed for applications requiring wireless access control. The v.S2 is a

self-contained microprocessor-controlled access control product with non-volatile memory. It is able to utilize

the existing wireless LAN (802.11b/g) in order to communicate with the access control system. The v.S2 lock

holds a total of 2400 unique users per lock.

This product is operated by six (6) “AA” alkaline batteries or a SARGENT 3267 9VDC power supply. SARGENT

mortise locks are designed with quality components to provide high security, performance and durability.

The Proﬁle Series v.S2 mortise lock may be used for both indoor and exterior applications. A weather-

protective gasket (provided with unit) is recommended for exterior applications.

HID® and iCLASS® are registered trademarks of HID Global Corporation.

• Wireless (WiFi 802.11 b/g) online,

battery-operated

• 2400 users per lock

• 10,000 Event audit trail

• Centralized lock management

• Door Status Monitoring**

• Easy installation (no need to hardwire)

• Input Power: DC 9V, 1.5A (6 AA alkaline

batteries or optional hard-powered)

• Lockdown capable**

• Supports HID® 125 kHz prox or 13.56

MHz iCLASS® credentials (26 - 39 bit);

supports CSN reads for other common

13.56 MHz cards, including MiFare,

DesFire, and Felica

• Supports most current WiFi networks

security standards

• For speciﬁc security information, please

contact a local ASSA ABLOY Door

Security Solutions sales consultant or

call 800-810-WIRE

3Electronic Speciﬁcations

• Latch: One-piece stainless steel, 3⁄4" projection

• Deadbolt: One-piece hardened stainless steel

• Guardbolt: Stainless steel, non-handed

• Handed: Easily ﬁeld reversible without

opening case

• Case: 12-gauge, heavy duty wrought steel

• Locks furnished for 1-3/4” doors. Can be

furnished for other door sizes upon request.

Consult factory.

• UL Listed (3 hours)

• Inside lever retracts latch and deadbolt

802.11b/g Wireless Network Device

Lock Management

Tool (LMT)

v.S2 Lock

Internal

Building

Network (Intranet)

Network

Interface

Card

Ethernet LAN

Installation Wiring Overview

SARGENT Proﬁle Series WiFi

v.S2 Typical Application

**Lockdown and real-time door status

monitoring available only when lock is

hard-powered

*Patent pending

03/31/15

1-800-810-WIRE • www.sargentlock.com • A7786G 5

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

Profile Series v.S2 WiFi Mortise Lock

6Lock Wiring

DX NC (GREEN/WHITE)

RX COM (WHITE)

RX NC (GREEN)

DX (WHITE/BLACK)

LX NO (RED/YELLOW)

LX COM (RED/GREEN

Motor B (BLACK)

Motor A (RED)

TB1

E1 TB2

From

Lock Body

(+) 9VDC (RED)

(-) (BLACK)

AX/DPS NC (PINK)

AX/DPS COM (VIOLET)

Unused

EGND (GREEN)

DPS

Power

Ring Terminal

From Trim

Controller Board Connectors

(Inside Escutcheon)

DPS

6 1-800-810-WIRE • www.sargentlock.com • A7786G

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/15

Profile Series v.S2 WiFi Mortise Lock

Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS

13*

*Patent Pending

03/31/15

1-800-810-WIRE • www.sargentlock.com • A7786G 7

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

Profile Series v.S2 WiFi Mortise Lock

1 Outside Lever Reference 8200 Catalog for available levers 1

2 Inside Lever Reference 8200 Catalog for available levers 1

3 82-0493 O/S Escutcheon only with Cylinder 1

82-0495 O/S Escutcheon only without Cylinder

4 82-0492 Inside Escutcheon only without Thumb Turn 1

82-4571 Inside Escutcheon only with Thumb Turn 1

52-4496 125 kHz Prox Only Bezel Assembly (S2-PA)

52-4497 Keypad and 125 kHz Prox Bezel Assembly (S2-PK)

52-4422 13.56 MHz Prox Only Assembly (S2-IA)

52-4423 Keypad and 13.56 MHz iCLASS Bezel Assembly (S2-IK)

6 52-4425 S2 Controller Assembly (Double Pulse) 1

7 52-3855 Battery Cover Assembly 1

8 01-1212 Security Screw 1

9 52-2427 Proﬁle Screw Pack - Specify Finish (Includes: Fire Stop Plate,

Trim Mounting Screws, Security Allen Wrench)

10 Consult Factory Lever Handle Screw (Depends on Lever Style) 1

11 Consult Factory Inside Adapter Assembly (Depends on Lever Style) 1

12 Consult Factory Outside Adapter Assembly (Depends On Lever Style) 1

13* S2-82276-hand-ﬁnish Lockbody with Deadbolt with Cylinder 1

S2-82277-hand-ﬁnish Lockbody with Deadbolt without Cylinder

S2-82278-hand-ﬁnish Lockbody without Deadbolt with Cylinder

S2-82279-hand-ﬁnish Lockbody without Deadbolt without Cylinder

14 82-0084 Faceplate with Deadbolt (shown) 1

82-0081 Faceplate without deadbolt 1

15 77-4336 Mortise Screw Pack - Specify Finish (Includes: Wood and Me-

tal Lock body Screws, Faceplate Screws, and Strike Screws)

16 Consult Factory #43 Mortise Cylinder 1

ITEM PART NO. DESCRIPTION QTY.

Parts Breakdown 125 kHz Prox and 13.56 MHz iCLASS, continued

*Patent Pending

8 1-800-810-WIRE • www.sargentlock.com • A7786G

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/15

Profile Series v.S2 WiFi Mortise Lock

Installation Instructions

A. Verify Hand and Bevel of Door

Stand on outside/locked side of door when determining the door hand.

B. Door Preparation

Prior to installation, all holes must be free of burrs, debris and sharp edges.

Prepare door according to appropriate template (see website www.intelligentopenings.com):

Door Manufacturing Template: 4533

Left Hand

Hinges Left

Open Inward

LHRB

Left Hand

Reverse Bevel

Hinges Left

Open Outward

Right Hand

Hinges Right

Open Inward

RHRB

Right Hand

Reverse Bevel

Hinges Right

Open Outward

1 – Door Preparation

Fig. 1A

Outside Cylinder Hole

(only with cylinder installation)

Outside of Door Inside of Door

Ribbon Cable Hole

(Controller to Keypad)

Lever Handle Hole

Through-bolt Hole

Ribbon Cable Hole

(Controller to Keypad)

Inside of Lockbody Wire Hole

Lever Handle Hole

Through-bolt Hole

Pre-drilled and/or

Tapped Holes

Mortised

Pocket

Thumb Turn Lever Hole

Fig. 1B

Through-bolt Hole

Trim Post Holes

Through-bolt Hole

Trim Post Holes

03/31/15

1-800-810-WIRE • www.sargentlock.com • A7786G 9

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

Profile Series v.S2 WiFi Mortise Lock

2 – How to Change Hand of Lockbody

B. Reverse Latch Hand

Beveled surface of latchbolt must face strike (Fig. 2B).

The deadlatch is self adjusting.

To change the hand of the latchbolt:

1. Insert the blade of a slotted screwdriver (>1/4”) into

the spade shape slot behind latch.

2. Rotate the screwdriver 90° to push latchbolt out until

back of bolt clears lock case front.

3. Rotate latchbolt 180° until the latchbolt

drops back into the lockbody.

Note: Latch cannot be unscrewed.

Latchbolt

Spade

Shaped

Slot

Fig. 2B

A. Reverse Lock Hand

Red surface of locking piece must face the outside/

locked side of door. To rotate locking piece (Fig. 2A):

1. Position lock body with red surface of locking piece

visible.

2. Insert blade type screwdriver into locking piece slot

to rotate locking piece toward back of lock body.

3. Rotate the locking piece 180° until RED surface is

on opposite side.

Note: Red indicates locked side (outside).

Locking Slide

Red on Locked Side

Push In

Right Hand

Lock Shown

Fig. 2A

Deadlatch

10 1-800-810-WIRE • www.sargentlock.com • A7786G

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/15

Profile Series v.S2 WiFi Mortise Lock

3 – Install Lockbody

Fig. 3

Inside of Door

4 – Door Options

A. Fire Stop Plate (P/N 52-0033)

Fire-rated doors require a ﬁre stop plate on

the outside of the door (Fig. 4A).

1. Drill (2) 1/8" x 1-1/4" deep holes in the

door if not already present.

Refer to template for ﬁre-stop

prep locations.

2. Attach with ﬂap up and

out using (2) #8 x 1/2”

self-tapping screws for

wood and metal doors.

B. Weather Conduit (52-2847)

Install weather conduit on

NON FIRE-RATED exterior doors only (Fig. 4B).

1. Carefully insert the weather conduit into the

ribbon cable hole on the inside of the door.

2. Place the O-ring around the weather conduit

on the outside and up against the door (Fig. 4C)

Outside of Door

Fig. 4B

Fig. 4C

Ribbon Cable Hole

O-Ring

1. Insert lock body into mortised cutout (Fig. 3).

2. Harness exits non-cylinder side of hole.

3. Hold lock body loosely in place with (2) lock

body screws (Fig. 3).

Note: Do not completely tighten screws at this time.

(2) #12-24 x 1/2”

Flat Head Screws

(Metal Doors)

(2) #12 x 1-1/4”

Flat Head Screws

(Metal Doors)

Connectors from

mortise lockbody

exit non-cylinder

side

Fig. 4A

Outside of Door

(2) 1/8” Diameter

Holes Required

Fire Stop Plate

(2) #8 Self-Tapping

Screws for Wood

and Metal Doors

Install Lock Body

Scan to see a video of this

installation step.

Table des matières

Autres manuels Assa Abloy Verrouillage

Assa Abloy

Assa Abloy effeff EX118R Manuel utilisateur

Assa Abloy

Assa Abloy OneSystem 319N Instructions d'installation

Assa Abloy

Assa Abloy Sargent Passport 1000 Series Manuel utilisateur

Assa Abloy

Assa Abloy Sargent 8200 Manuel utilisateur

Assa Abloy

Assa Abloy Lockwood Pentagon 3P70 Manuel utilisateur

Assa Abloy

Assa Abloy Abloy EL428 Manuel utilisateur

Assa Abloy

Assa Abloy EL595 Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin IN100 Manuel utilisateur

Assa Abloy

Assa Abloy EMTEK EMPowered Motorized Smart Lock Upgrade... Manuel utilisateur

Assa Abloy

Assa Abloy Abloy EL420 Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin UT5200 Series Guide de démarrage rapide

Assa Abloy

Assa Abloy High Security Deadbolt 6000 Manuel utilisateur

Assa Abloy

Assa Abloy ALARM CONTROLS Magnalock 1200DE Delayed... Manuel

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 MP9800 Series Manuel utilisateur

Assa Abloy

Assa Abloy Securitron Magnalock Series Manuel utilisateur

Assa Abloy

Assa Abloy Securitron CEPT-10-10 Manuel utilisateur

Assa Abloy

Assa Abloy Interlock IEGL Manuel utilisateur

Assa Abloy

Assa Abloy Yale P113 Manuel utilisateur

Assa Abloy

Assa Abloy eCLIQ Manuel utilisateur

Assa Abloy

Assa Abloy Yale Real Living Assure Lock SL Series Caractéristiques techniques

Assa Abloy

Assa Abloy Yale YDM7116A Manuel utilisateur

Assa Abloy

Assa Abloy Yale Real Living Assure Lever YRL256 Caractéristiques techniques

Assa Abloy

Assa Abloy VingCard Essence Manuel utilisateur

Assa Abloy

Assa Abloy 1048.10 Mode d’emploi

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur