Artillery Sidewinder X4 Plus Manuel utilisateur
User Manual for 3D Printer
Sidewinder X4 Plus
Thank you for choosing ARTILLERY Products. For your convenience, please read this manual carefully before use, and strictly follow the
instructions in the manual. The ARTILLERY team is always ready to provide you with excellent seice.
No matter what problems you encounter, please contact us by telephone and email at the end of the manual. In order to enhance your
experience with our product, you can also acquire knowledge about equipment operation through the following methods:
Included User Guide: You can nd relevant instructions and videos on the USB ash drive.
You can also visit the ARTILLERY ocial website (www.aille3d.com) to nd information regarding software and hardware, contact details,
equipment operation, and maintenance,etc.
ProductIntroduction
1. Do not attempt to use the machine in any way that is not described in the user manual to avoid personal inju or propey damage.
2. Do not place the machine near ammable or high heat sources. Instead, place it in a well-ventilated, cool, and dust-free environment.
3. Do not place the printer in a vibrating or unstable environment, as machine vibrations can aect print quality.
4. It is recommended to use consumables recommended by the manufacturer to avoid nozzle clogging and machine damage.
5. Do not use other power cords during installation. Please use the power cord provided with the machine and plug it into a three-hole socket
with grounding.
6. Do not touch the nozzle or hotbed while the printer is in operation to prevent burns and personal inju.
7. Do not wear gloves or loose clothing while operating the machine to prevent entanglement or inju from moving pas.
8. After completing a print, clean the residue on the nozzle using tools while taking precautions not to touch the hot nozzle with bare hands.
9. Regularly maintain the printer by cleaning the machine body with a d cloth, removing dust and adhered printing materials or foreign objects
from the guide rails while the power is o.
10. Children under the age of 10 should not use the machine without supeision to avoid personal inju.
11. Users must comply with relevant national and regional laws and regulations, adhere to professional ethics, and fulll safety obligations. It is
strictly prohibited to use our products or equipment for any illegal purposes. Our company takes no responsibility for any legal liabilities
resulting from violations.
12. In case of emergencies, please turn o the power directly.
Instructions
CONTENTS
15-16
4.2 Printing Files
17-17
4.3 WIFI Connection Printing
01-03
01. Equipment Information
01-01
1.1 Introduction
02-02
1.2 Specications
03-03
1.3 Packing List
04-06
2.1 Product Installation
20-23
06.Warmly Reminding and Daily Maintenance
20-21
6.1 Printing Precautions
22-22
6.2 Maintenance Projects
23-23
6.3 Legal Explanation
18-19
05.Machine Function Explanation
18-18
5.1 Feed
19-19
5.2 Material Retraction
12-16
04.Printing for The First Time
12-14
4.1 Software Conguration
07-11
03.Introduction to the Equipment Screen Inteace
07-07
3.1 Common Inteaces
08-09
3.2 Common Functions
10-10
3.3 Boot Guide
11-11
3.4 Leveling Settings
04-06
02.Unboxing Operation
1.1 设备简介
Extruder Assembly
Type-C Inteace
USB Inteace
Touch Screen
Filament Tube
Filament Spool Holder
Filament Run-out Sensor
Coupling
Power Socket
Lead Screw
Diagonal Brace
Power Switch
WIFI Antenna
01
1. Equipment Information
1.1 Introduction
Basic Specication
Sidewinder X4 Plus
300mm*300mm*400mm
510mm*490mm*680mm
FDM
≤500m/s
0.4mm
5-45 ℃
Proximal Extrusion
PLA/TPU/PETG/ABS/PET/Carbon
300°C
100°C
4.3 inch Touch Screen
U disk/WIFI
Suppo
Suppo
Suppo
02
Printing Size
Machine Dimensions
The Principle of Printing
Print Speed
Nozzle Diameter
Operating Environment Temperature
Type of Extruder
Compatible Materials
Maximum Nozzle Temperature
Screen
Maximum Heated Bed Temperature
Printing Method
Auto-leveling
Power-o Resume
Filament Run-out Detection
Product Model
1. Equipment Information
1.2 Specications
03
List of main pas and components: List of accessories and tools:
Pedestal assembly x1
1Gant x1
2
Tool Kit x1
1
Wrench and Screwdriver x1
2
PTFE Tube x1
3
Metal Spatula x1
4
Pliers x1
5
Needle Probe x1
6
Zip Ties x2
7
Screen Bracket x1
5Display Screen x1
6Power Cable × 1
8Display Cable x17
Nozzle x1
8
Quick Sta Guide x1
14
WIFI Antenna x1
9
Consumables x1
9
Quick guide
User Manual x1
15
User's Manual
10 Filament Run-out Detection
11 Tension Rod x2
( M5*40 )4pcs
( M4*18 )2pcs
( M3*12 )2pcs
( M5*16 )2pcs
( M5*10 )2pcs
( M3*4 )1pcs
( M5 black at gaske) 4pcs
( φ4x3xM3)1pcs
Adhesive x1
10 R-type Wire Clip x1
11
3Filament Tube × 1
12 USB Flash Drive x1
Filament Holder × 1
4
1.3 Packing List
Grease x1
13
1. Equipment Information
Inse the gant into the slot on the
base. Ensure that the gant direction
matches the bottom slot direction.
1
Assemble the material rack assembly as shown in the following gure:
Thread the material pipe through the material rack and tighten it, and
then install the broken material detector assembly on the right side of
the material rack with one φ 4 x3xM3 screw (screw bags②) .
2. Unboxing Operation
2.1 Product Installation
04
2Use four M5*40 screws (screw bags ①) to lock the gant on the base.
When locking the screws, make sure to keep the prole close to the
inside and then lock it to prevent the appearance of external eight
characters.
3
Install the rack assembly to the top cross member using two M4*18
screws (screw bags ③) .
4
M5*40
M5*40
φ4x3xM3
M4*18
2. Unboxing Operation
56
Fix the screen bracket on the right side of the machine with two M3*12
screws (screw bags④) (as shown in Figure a);
Connect both ends of the telephone line to the right side of the
machine and the screen po respectively (as shown in Figures b and c);
Place the display screen on the screen bracket. Connect the WIFI
antenna (as shown in Figures d and e).
Inse the 3pin line of broken material detection into the broken materi-
al detection po; Then inse the 2pin line of the top LED lamp into the
LED lamp po; Finally, inse the 4pin wire of the motor into the motor
pos on both sides of the Z axis.
05
M3*12
WIFI Antenna
Display cable
a
c
d e
b
Material break
detection
LED light
Z-axis machine
Z-axis machine
left Z-axis machine
Right Z-axis machine
2. Unboxing Operation
7
8
9
Inse the at cable from the xed sheet
metal pa and then inse it into the horn
head po at the top of the extrusion head.
Inse the 6pin wire of the motor into the
X-axis motor po.
Use one M3*4 screw (screw bags ⑤) to x the
R-type clamp at the rear end of the X-axis xture.
Use two M5*10 screws (screw bags⑥) to x the
upper end of the inclined tie rod, and then use
two M5*16 screws (screw bags⑦) to x the
lower end of the inclined tie rod. (4 M5 gaskets
should be added during installation to prevent
loosening.)
06
10
M5*10
M5*10
M5*16
M5*16
M5 gasket
M5 gasket
M3*4
M3*4
50/88°C50/88°C
Turn on/
o the lights Fan
Print
Settings
Tools
Home page
SW-X4 Plus
Model fan
3.1 Common Inteaces
07
Heated bed temperatur
Top lighting lamp
Settings inteace
Boot inteace
Tool inteace Printing inteace
Main inteace
Nozzle temperature
3. Introduction to the Equipment Screen Inteace
Language After-sales
seice
System
resta About
简体中文
English
Deutsch
PrintSettingsToolsHome page
Print
Settings
ToolsHome page
0.1mm 1mm 10mm
000 000000
Moving Loading
consumables Calibration Network
zero
Unlock
Previous page Next page
-------File 1--------
-------File 2--------
-------File 3--------
-------File 4--------
-------File 5--------
-------File 6--------
-------File 7--------
Print
Print
Settings
ToolsHome page
Table des matières
Langues :
Autres manuels Artillery Imprimante 3D
