ARTHUR HOLM AH17S HDGA Manuel utilisateur
User manual
AH17S HDGA
17’’ professional widescreen monitor with manually tilt adjustment
Table of contents
EC REGULATIONS & SECURITY 6
SAFETY INSTRUCTIONS 7
FEATURES 8
BOX CONTENTS 8
CONTROLS 9
OSD MENU 10
INPUT CONNECTORS 13
INPUT SIGNALS 13
PRODUCT WARRANTY 15
Welcome
Thank you for purchasing an ARTHUR HOLM product.
Our product range has been designed to create the perfect meeting room,
where the screens are a part of the interior design as well as essential
communication tools.
Please, read this installation and operating instructions carefully and keep
them in a safe place for a future consultation.
We remain at your entire disposal if you have any suggestions
that would help us to improve our products.
Henrik Holm
General Manager
6
EC Regulations and Security
ATTENTION: Do not disassemble or modify the device in any way.
This symbol warns of the presence of dangerous un-insulated voltages
inside some of the components, of sufficient magnitude to expose people
to risk of electronic shock.
This symbol draws attention to important use and maintenance instructions
in the manual that accompanies the unit.
This symbol indicates that the equipment conforms to the norms
established by the European Community.
7
Safety instructions
PLUGS
– Do not dismantle any part of the monitor power connector.
– Disconnect the power plug from the AC outlet when the monitor is not
going to be used for an indefinite period of time.
POWER AND EXTENSIONS CORDS
– Use the appropriate power cord with the correct plug type
– Do not overload wall outlets or power cords
– Make sure the total ampere passed through a extension cord does not
exceed the maximum allowed by the cable used
– Do not place anything on the power cord
– Do not locate this product where a person may walk or trip over the cord
Wiring connected to hazardous voltage requires installation by qualified
personnel or the use of ready-made flexible cables.
For your security, your equipment must be connected to an electrical
outlet with grounding connection protection.
The operating electrical outlet must be in an easily accessed place.
ENVIRONMENT
– Install the equipment on an elevated, flat surface
– Install the equipment in a ventilated area
– Avoid exposing the equipment to:
Rain or water
Excessive heat, cold or humidity
Areas exposed to direct sunlight
Dirty areas
Equipment generating strong magnetic fields
– Avoid placing open containers of liquid, near the equipment
– Keep a minimum distance of 30mm in order to have good ventilation
– Never place any sources of flames, such as lighted candles, etc. above the device
– If you are using the device in extreme weather conditions and/or tropical
climates, the equipment should be installed in a room which ensures a
reasonable level of temperature and humidity
- To prevent damage the equipment must be firmly anchored to the surface,
as shown in the installation instructions
8
System Description
FEATURES
- 17" TFT Active Matrix display, widescreen format, FULL HD
- Low power consumption
- Low radiation
- Quick response time
- Signal input: HDMI HDCP compliant
- Manually tilt adjust from 0º to 25º
- Monitor housing made of solid mechanized aluminium in anodized finish and
front glass
BOX CONTENTS
Before the installation of your monitor, please check the contents of the
shipping box, it must contain the following items:
- Monitor unit
- Power cord
- Power supply 100-240Vac, 50-60Hz. Output 12V
- User Manual
9
Controls
REMOTE CONTROL
Use the IR remote control to access the monitor configuration:
POWER Switch ON/OFF the monitor
MENU Activates the OSD menu on screen
DOWN Cursor control down on OSD menu. When the
OSD menu
is not active on screen, selects the input
source
UP Cursor control up on OSD menu
LEFT Cursor control left on OSD menu
RIGHT Cursor control right on OSD menu
OK Selects the function on OSD menu
ACCESSING THE MENU SYSTEM
– With the OSD off, push the MENU button to activate the main OSD menu
– Press the UP and DOWN button to move from one function to another.
As you move from one icon to another, the function name changes
to reflect the function or group of functions represented by that icon.
Please refer to the following sections below to view a complete list of
all the functions available for the monitor
– Press the OK button to enable the item
– When a function is selected, press the LEFT and RIGHT buttons in order to
change the parameter of the function
10
OSD menu
Press the Menu button to access to the main menu:
PICTURE
CSM Configuration of the image colour
Cool
Normal
Warm
User (manually adjustment of red, green and blue colours)
PSM Configuration of the bright image
Dynamic
Standard
Mild
Game
User (manually adjustment of brightness and contrast)
Contrast Image contrast adjustment
Brightness Image brightness adjustment
Table des matières
Autres manuels ARTHUR HOLM Moniteur
ARTHUR HOLM
ARTHUR HOLM AH10DB2 Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH22DRM Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM DB2Twin Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM Dynamic3 AH15D3HDGA Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM RISE AH12RI Wide Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM DynamicX2Talk Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH24DB2 Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH17D X2HDGA Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH12D 216A Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH15DCDHD Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM RISE AH12RI Wide Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM DB2Share Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM RISE AH10 RA Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM Dynamic3Talk Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH12TX16GA Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH17D3 RHDGA TALK Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH 18D3 RHDGA RV Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH24DB2 Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM Gooseneck AH22NTT16 Manuel utilisateur
ARTHUR HOLM
ARTHUR HOLM AH15D X2HDGA Manuel utilisateur
