Aranet MINI Manuel utilisateur
USERS GUIDE
Aranet MINI User’s Guide
FCC Compliance statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the device.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from the one the receiver is connected to.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and any part of your body.
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Aranet MINI does not contain serviceable parts. Warranty will not be applicable in the event Aranet MINI
has been opened.
The information presented in this guide is the property of SAF Tehnika, JSC. No part of this document may
be reproduced or transmitted without proper permission from SAF Tehnika, JSC.
The specications or information contained in this document are subject to change without notice due
to continuing introduction of design improvements. If there is any conict between this document and
compliance statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind that result
from the use of this document.
To get up to date information about accessories and their availability, please contact sales representative.
Copyright Notice
Copyright © 2017 SAF Tehnika, JSC. All rights reserved.
Industry Canada Regulatory Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
TABLE OF CONTENTS
Introduction 1
Aranet MINI Base Station Overview 2
What’s in the box 2
Aranet MINI ports 3
Aranet MINI Datasheet 4
Initial set up 5
Device functionality 7
Main menu 7
Settings 8
Alarms 8
Password 8
Screen 8
Exporting the data 9
Advanced 9
Terms of use 10
Warranty 10
RMA (Return Merchandise Authorization) form 14
Intellectual Property Rights 14
Cleaning And Maintenence 14
Accessories 15
Disclaimer 15
Additional information 15
1
INTRODUCTION
Aranet oers environmental monitoring solutions for a variety of businesses.
The base station has exceptional sensitivity of -129dBm and allows placing sensors within line - of - sight
range of at least 3km/1.9mi.
All Aranet MINI base stations come with preinstalled software that allows for viewing of data in real
time, set thresholds for alarms as well as exporting data for further analysis. Simple UI/UX design of the
software in combination with resistive touchscreen enables easy navigation even with gloves on.
Visit www.aranet.com for more information.
2
ARANET MINI BASE STATION OVERVIEW
What’s in the box
(1) Aranet MINI base station
(2) Aranet MINI base station mount
(3) AC power adapter
1
2
3
3
Aranet MINI ports
(1) On/o switch
(2) Micro USB port
(3) Micro USB port
!NOTE!Don’t utilize both of the USB ports at the same time
Terms of use
The Customer is obliged to guarantee the usage, maintenance, and preservation of the Equipment
at their own expense in a way that excludes the Equipment’s theft, loss, destruction, harming and/or
damaging (including as a result of mechanical damages, moisture, liquid related damages, lightning
and/or other similar events). The base station may only be used indoors, it needs to be protected from
environmental impact (snow, rain, direct sunlight).
1 2
3
Back
Bottom
4
Aranet MINI Datasheet
Aranet MINI
Maximum sensors amount 12
Barometer Built-in
Alarm type Built-in audio alarm
Memory 10+ years with 12 sensors
Receiver sensitivity -129 dBm
Channels Channel 1: 917.6 MHz
Channel 2: 918.4 MHz
Channel 3: 919.2 MHz
Channel 4: 920.0 MHz
Channel 5: 920.8 MHz
Channel 6: 921.6 MHz
Channel 7: 922.4 MHz
Graph range Temperature: -40°C to 120°C/ -40°F to 248°F
Humidity: 0% to 100%
Pressure: 280 hPa to 1050 hPa
Data resolution Temperature: 0.1°
Humidity: 1%
Pressure: 1 hPa
Data protection Password for settings screen, encryption for data
Communication USB cable to PC
Power options AC Power adapter
USB cable from PC
Built-in battery (backup power up to 8h)
Operating temperature 0°C to 40°C / 32°F to 104°F
Operating humidity 0% to 100% non-condensing
Interface languages English, French, German, Spanish, Portuguese, Latvian
Display LCD, 4.3 inch, 480x272 px, resistive touchscreen
Dimensions 79x137x27 mm / 3.11x5.4x1.06 w/o stand
Ports 2 USB micro B
Weight 180g / 6.4oz w/o stand
Construction ABS Plastic
Protection class IP40
FCC Marking Yes
Included AC power adapter with USB cable, stand
5
INITIAL SET UP
(1) Turn on the device – the power switch is situated at the bottom, next to the USB port. You should
now see the main screen. If no sensors are attached only the atmospheric pressure readings will
be displayed. In the upper right corner the settings menu icon is located.
(2) Attach the power supply to one of the two USB ports, depending on how the device will be
positioned. In case it will be placed on a at surface attach the included stand to the device. Once
it is done the battery icon in the middle of the top row of the main screen will be changed to a
plug icon.
(3) Before adding sensors, tap then Time menu. Set correct time and date – it will ensure that the
data is represented correctly. Tap to return to the main menu or back to return to settings
menu.
Table des matières
Manuels Station météorologique populaires d'autres marques
National Geographic
National Geographic VA Colour RC Manuel utilisateur
Renkforce
Renkforce 1208067 Manuel utilisateur
Levenhuk
Levenhuk Discovery Report WA40 Manuel utilisateur
Instant Transmission
Instant Transmission MA 10410 Manuel utilisateur
Lutron Electronics
Lutron Electronics PHB-318 Manuel utilisateur
WAREMA
WAREMA EWFS Weather station eco Manuel utilisateur