ANTAIRA USB-HUB4K Manuel utilisateur

Thank you for purchasing this high-speed 4-port USB2.0 hub. It provides

an ideal solution to expand 4 USB2.0 ports from one single USB2.0 host

port. It provides metal case with Screw Lock feature for upstream and

downstream USB ports. It provides excellent reliability and

performance for most of the applications.

Features:

Compliant with USB Specification Revision 2.0

Rigid and Wall-mountable Metal Case

Supports Screw Lock Mechanism for Upstream and Downstream

Connectors to Enhance Reliability

Supports High-speed and or Full-speed Packet

Protocol Sequencer for Endpoint 0/1

Provides 7 Downstream Facing Ports

Supports 480Mbps, 12Mbps and 1.5Mbps Speed

Supports Self-powered and Bus-powered Mode

Port #1

Port#4

4-Port USB2.0 Metal Hub with Screw Lock

Mechanism

Installation Guide

1. Introduction

2. Connector Layout

Downstream USB2.0 Ports

Power LED

+5V DC Jack, w/ Screw Lock

USB2.0 Connector (upstream

port, w/ Screw Lock)

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

Back side Connection:

Front Side Connection:

+5V DC Jack Power Connector (w/ Screw Lock): A DC5V AC

adapter (with optional Screw Lock Connector) is supplied

with this product. The AC adapter’s output has to be

connected to here.

+5V DC Jack

(AC Adapter w/ Screw Lock)

Type-B USB2.0

Upstream Cable

(w/ Screw Lock)

Downstream USB2.0 Port w/

Screw Lock Cable

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

USB2.0 Upstream Connector (w/ Screw Lock): Type-B

connector from upstream USB2.0 port. It is connected from

host or another USB2.0 hub. The connector is compatible

with either non-Screw-Lock or Screw-Lock type cables.

USB2.0 Downstream Connectors (w/ Screw Lock): There are

4 Type-A downstream USB2.0 connectors. They should be

connected to the USB devices with non-Screw-Lock or

Screw-Lock (optional) cables.

1. Use static electricity discharge precautions.

Remove possible static discharge potential from any

objects that the hub may come in contact with before

installation. This can be accomplished by touching a bare

metal chassis rail after you have turned off the power.

2. Attached the AC power adapter.

3. Connecting USB Host cable: The host cable is a standard

A-to-B USB2.0 cable (or optional Screw-Lock type cables).

Please connect the type-A end connector of the cable to

your upstream USB port, then connect the type-B end

connector to this hub. Since the USB hub is plug-and-play,

you don’t have to turn off your host computer when

installing the hub.

Note: In some cases, you will see an error message said

that the USB Hub caused the USB bus power over the current limit,

please ignore this message since the hub is hot plug and its power

capacitor will cause a very short period of current. It will NOT affect

your USB function.

4. Connect the USB devices to the downstream ports of this

hub. You can use either non-Screw-Lock or Screw-Lock

type (optional) cables.

5. Mount your hub on the wall if required.

3. Hardware Installation

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

To check the USB hub installation in Windows device manager, please

follow the following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager button

5. Double click Universal Serial Bus Controller

6. Double click Generic USB Hub, the message will show that this

device is working properly.

Operating temp.: 0 to 558C (32 to 1318F)

Operating humidity: 5 to 95% RH

Dimensions (LxWxH): 7.03”(L)x2.43”(W)x0.92”(H)

(17.85 x 6.16 x 2.34 cm)

5. Environmental Specifications

4. Checking the Hub Installation

Here is your USB2.0 Hub

Autres manuels pour USB-HUB4K

Table des matières

Autres manuels ANTAIRA Changer

ANTAIRA

ANTAIRA LNX-1002G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-1600G Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-0800G Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-1202G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-0501 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-2828G-10G-SFP Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0500 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0601G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-800AG Manuel utilisateur

ANTAIRA

ANTAIRA LNP-0702G-SFP-24 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-1002C-SFP Manuel utilisateur

ANTAIRA

ANTAIRA LNP-1600G Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-1802G-M12-10G-SFP-67 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-1202M-SFP-24 Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-1002G-SFP-T-CC Manuel utilisateur

ANTAIRA

ANTAIRA LNP-1204G-10G-SFP Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0501-M-V2 Manuel utilisateur

ANTAIRA

ANTAIRA LMP-2004G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-0804G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-0500 series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-1802G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-C500-T-CC Manuel utilisateur

ANTAIRA

ANTAIRA LNX-1802G Manuel utilisateur

ANTAIRA

ANTAIRA LNP-0500-24 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur